Abstract
Alloy 718 (UNS N07718 ) was the culmination of a research project started in the mid-1950s to develop a stronger pipe alloy for coal-fired power plants. It was never used for that application, but it was quickly adopted for aircraft turbine engines because of its very high strength , thermal stability, formability and weldability compared to the γʹ-strengthened alloys available in the 1960s. Alloy 718 derives its unique combination of strength and fabricability from a coherent ordered tetragonal phase γʺ and the slow diffusion rate of its main constituent, niobium . Very early in its commercial life, alloy 718 was recognized as having attributes for both ambient and cryogenic temperature uses as well. Impact toughness, aqueous corrosion resistance, and non-ferromagnetic properties were important attributes. Alloy 718 replaced established age-hardened iron/nickel-base alloys such as A-286, K-500 and X-750 as well as martensitic steels in a wide range of components in the space launch, oil and gas , marine, nuclear and superconducting magnet industries. As the applications became more specialized, so did the heat treatments and microstructures to accentuate specific properties. A common thread through these low temperature applications has been hydrogen embrittlement and a substantial body of literature documents our increasing awareness of its role in service performance. In recent decades, new alloys based on alloy 718 and the γʺ strengthening phase have been introduced, especially for oil and gas production equipment. This paper describes the early development of alloy 718 for these important applications , along with alloy, microstructure and heat-treatment evolution and current status.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Eiselstein HL, Tillack DJ (1991) The invention and definition of Alloy 625. In: Loria EA (ed) Superalloys 718, 625 and various derivitives Warrendale, PA, The Minerals, Metals & Materials Society, pp 1–14
Henry JF, Zhou G, Ward T Lessons from the past: materials-related issues in an ultra-supercritical boiler at Eddystone plant. Mater High Temp 24:249–258
Eiselstein HL (1965) Metallurgy of a Columbium-hardened nickel-chromium-iron Alloy. In: Advances in the technology of stainless steels and related Alloys, New York NY, ASTM STP No 369 pp 62–79
Barker JF (1989) The initial years of Alloy 718—a GE perspective. In: Loria EA (ed) Superalloy 718, metallurgy and applications, Warrendale, PA, The Minerals, Metals & Materials Society, pp 269–278
Paulonis DF, Shirra JJ (2001) Alloy 718 at Pratt and Whitney—historical perspective and future challenges. In: Loria EA (ed) Superalloys 718, 625 and 706 and various derivitives, Warrendale, PA, The Minerals, Metals & Materials Society, 2001 pp 13–23
Eiselstein HL (1962) Age-hardenable nickel Alloy. U.S. Patent No 3,046,108, 24 July 1962
Inconel Alloy 718, New York, NY, The International Nickel Co., Inc. (1968)
High temperature high strength nickel base Alloys, New York, NY, The International Nickel Co., Inc. 3rd edn. July 1977
Wagner HJ Hall AM Physical metallurgy of Alloy 718. In: Cometto JC (ed) summary of private communication from DMIC Report 217, Battelle Memorial Institute, Columbus OH, 19650
Raymond EL (1967) Effect of grain boundary denudation of Gamma prime on the Notch-Rupture ductility of Inconel nickel–chromium Alloys X-750 and 718. Trans AIME 239:1415–1422
Kotval PS (1968) Identification of the strengthening phase in Inconel Alloy 718. Trans AIME 242:1764–1765
Paulonis DF, Oblak JM, Duvall DS (1969) Precipitation in nickel-base Alloy 718. Trans ASM 62:611–622
Nevitt MV (1963) Electronic structure and Alloy chemistry of transition elements Beck PA (ed) Interscience Publishers, New York, p 169
Hong SJ, Chen WP, Wang TW (2001) A diffraction study of the γʺ phase in INCONEL 718 superalloy. Metallurg Trans 32A:1887–1901
Decker RF, Mihalisin JR (1969) Coherency strains in γʹ hardened nickel Alloys. Trans ASM 62:481–489
Oblak JM, Paulonis DF, Duval DS (1974) Coherency strengthening in Ni base alloys hardened by DO22 γʺ precipitates. Metallurg Trans 5:143–153
Sundararaman M, Mukhopadhyay P, Bannerjee S (1988) Deformation Behavior of γʺ phase in INCONEL 718 superalloy. Acta Metallurg 36:847–863
Ardell AJ (1985) Precipitation hardening. Metallurg Trans 16A:2131–2165
Martin HL et al (1968) Effects of low temperatures on the mechanical properties of structural metals, NASA SP 5012(01)
Inouye FT (1967) Application of Alloy 718 in M-1 engine components, NASA Report CR-788, NASA
Dankhoff WF (1963) The M-1 rocket engine project, NASA Technical Memorandum, NASA TM X-50854, NASA
Jewett RP, Halchak JA (1991) The use of Alloy 718 in the space shuttle main engine. In: Loria EA (ed) Superalloys 718, 625 and various derivitives Warrendale PA, The Minerals, Metals & Materials Society, pp 749–760
Laurence JC (1968) High field electromagnets at NASA Lewis research center, NASA TN D-4910, Nov 1968
Hwang IS et al (1991) Improved mechanical properties of Alloy 718 by Anneal and direct aging process for nuclear fusion applications. In: Loria EA (ed) Superalloys 718, 625 and various derivitives Warrendale, PA, The Minerals, Metals & Materials Society, pp 621–633
Barabash V et al (2007) Materials challenges for ITER—current status and future activities. J Nucl Mater 367–370, Elsevier B.V. 21–32
Landis J-D et al (2007) Design of the critical components in the ITER ECH upper launcher steering mechanism. Fusion Eng Design Elsevier B.V. 897–904
Barabash V et al (2010) Materials for the ITER vacuum vessel and in-vessel components—current status. In: Presented at first joint ITER-IAEA technical meeting on analysis of ITER materials and technologies, Principality of Monaco, Nov 23–25 2010
Corrosion-resistant alloys for oil and gas production (1999) SMC-013. Special Metals Corp, Huntington WV
Copson HR (1959) Effect of composition on stress corrosion cracking of some Alloys containing nickel. In: Rodin TN (ed) Physical metallurgy of stress corrosion fracture, New York, NY, Interscience
Arena MA et al (2005) Advanced seal delivery system, perspectives and options. Rand report
Robbins WH, Finger HB (1991) An historical perspective of the NERVA rocket engine technology program NASA Contractor Report 187154, AIAA-91-3451, July 1991
Smolik GR, Reuter WG (1975) Heat treatment investigations for welded 718 pressure vessels for the power burst facility Report ANCR-1227. Aerojet Nuclear Co, Idaho Falls, ID
Mills WJ (1979) The influence of heat treatment on the microstructure and mechanical properties of Alloy 718 base metal and weldments, HEDL-TME 78–54, Westinghouse Hanford Company
Kimmerle WL, Miglin MT, Nelson JL (1989) Stress corrosion cracking of Alloy 718 in pressurized-water-reactor primary water. In: Loria EA (ed) Superalloy 718 metallurgy and applications Warrendale, PA, The Minerals, Metals & Materials Society, pp 417–426
Kimmerle WL, Miglin MT (1991) Heat treatment of Alloy 718 for improved stress corrosion cracking resistance. US Patent 5,047,093, Sept 10, 1991
Heacox RA (1972) Influence of cold reduction and heat treatment on the properties and microstructure of Alloy 718 Fastener Stock. In: Superalloys—processing. Battelle, Columbus, OH, pp 1–15
Roach TA (1989) Alloy 718 fasteners, versitility and reliability for aerospace design. In: Loria EA (ed) Superalloy 718 metallurgy and applications, Warrendale PA, The Minerals, Metals & Materials Society, pp 381–389
Vander Voort GF (1997) Metallographic characterization of pyromet® 718 Alloy fasteners. In: Loria EA (ed) Superalloys 718, 625, 706 and various derivitives, Warrendale PA, The Minerals, Metals & Materials Society, pp 825–834
Chandler WD, Ghosh AK, Mahoney MW (1984) Superplastic forming and diffusion bonding of Inconel 718. J Spacecraft Rockets 21:61–64
Mahoney MW (1989) Superplastic properties of Alloy 718. In: Loria EA (ed) Superalloy 718—metallurgy and applications, Warrendale PA, The Minerals, Metals & Materials Society, pp 391–405
Smith GD et al (1992) Microstructural and mechanical property characterization of superplastically formed Inconel alloy 718SPF. In: Antolovich SD et al (ed) Superalloys 1992, Warrendale, PA, The Minerals, Metals & Materials Society, 1992 pp 43–52
Kolts J (1989) Alloy 718 for the oil and gas industry. In: Loria EA (ed) Superalloy 718—metallurgy and applications Warrendale PA, The Minerals, Metals & Materials Society, pp 329–344
Onyewuenyi OA (1989) Alloy 718—Alloy optimization for applications in oil and gas production. In: Loria EA (ed) Superalloy 718—metallurgy and applications, Warrendale PA, The Minerals, Metals & Materials Society, pp 345–362
Bhavsar RB, Collins A, Silverman S (2001) Use of Alloy 718 and 725 in the oil and gas industry. In: Loria EA (ed) Superalloys 718, 625 and various derivitives Warrendale, PA, The Minerals, Metals & Materials Society, pp 47–55
de Barbadillo JJ, Mannan SK (2010) Alloy 718 for oilfield applications. In: 7th international conference on superalloy 718 and derivitives, Ott EA et al (ed) Warrendale, PA, The Minerals, Metals & Materials Society, 2010 pp 579–593
Badrack RP (2014) Status of precipitation hardened nickel base alloys including 718 for oilfield applications. In: International symposium on superalloy 718 and Derivatives, Ott et al (ed) Warrendale, PA, The Minerals, Metals & Materials Society, 2014 pp 493–502
API Standard 6ACRA (First ed) (2015) Age-hardened Nickel-base alloys for oil and gas drilling and production equipment. API Publishing Services, Washington DC
International Standard, ANSI/NACE MR0175/ISO 15156–3:2015, Petroleum, petrochemical and natural gas industries: material for use in H2S-containing environments in oil and gas production, Part 3, cracking resistant CRAs and other alloys, NACE International, Houston TX, Nov 23, 2015
Quist WE, Taggert R, Polonis DH (1971) The influence of iron and aluminum on the precipitation of metastable Ni3Nb phases in the Ni-Nb system. Metallurg Trans 2:825–832
Burke MG, Miller MK (1991) Precipitation in Alloy 718: a combined AEM and APFIM investigation. In: Superalloys 718, 625 and various derivatives, Loria EA (ed) Warrendale PA, The Minerals, Metals & Materials Society, pp 331–350
Hibner EL (1990) A new age-hardenable corrosion resistant alloy for deep sour gas well service. In: NACE Corrosion 90, paper no 50, Apr 23–27, 1990
Frank RB, DeBold TA (1988) Properties of an age-hardenable, Corrosion-resistant Nickel-base Alloy. NACE Corrosion 88, paper no 75, Mar 21–25 1988
Mannan SK, Patel SJ (2008) A new high strength corrosion resistant alloy for oil and gas applications. In: NACE Corrosion 2008, paper no 08084, Mar 2008
Mannan SK (2010) Alloy 945 and its derivatives—higher strength products for oil and gas. NACE corrosion 2010, paper no 10310, Mar 2010
Feroni L et al (2015) UNS N09955: A new Ni-base Alloy for H2S and hydrogen charging environments. NACE corrosion 2015, paper no 5502, Mar 2015
Frick V, Janser GR, Brown JA (1971) Enhanced flaw growth in SSE main engine alloys in high-pressure gaseous hydrogen. Space Shuttle Mater SAMPE 3:597–634
Walter RJ, Chandler WT (1973) Influence of gaseous hydrogen on INCONEL 718. In: Thompson AW (ed) Hydrogen in metals, Bernstein IM, Materials Park OH, ASM 1973 pp 515–525
Fritzmeier LG, Chandler WT (1989) Hydrogen embrittlement—rocket engine applications. In: Tien JK, Caulfield T (eds) Superalloys, supercomposites and superceramics, New York, NY, Harcourt, Brace Jovanovich, 1989 pp 491–524
Birnbaum Hk (1989) Mechanisms of hydrogen related fracture of metals. Technical report to ONR on contract no USN 00014–83-K-0468, May 1989
Hicks PD, Altstetter CJ (1992) Hydrogen-enhanced cracking of superalloys. Metallurg Trans 23A:237–249
Hicks PD, Altstetter CJ (1991) Comparison of internal hydrogen embrittlement of superalloys 718 and 625. In: Loria EA (ed) Superalloys 718, 625 and various derivatives, Warrendale, PA, The Minerals, Metals & Materials Society, pp 635–651
Huizinga S et al (2003) Offshore nickel Alloy tubing hanger and duplex stainless steel piping failure investigations. In: Corrosion 2003 paper no 03129, Mar 2003
Cassagne T et al (2008) Understanding field failures of Alloy 718 forging materials in HP/HT wells. In: EuroCorr, Sept 2008
SpaceX news. www.spacex.com. Accessed 31 July 2014
Acknowledgements
First and foremost, the authors are grateful to have known alloy 718 inventor Herb Eiselstein as a friend and collaborator. A very reserved but focused and persistent man, Herb’s inventions have impacted many industries. Long after his retirement, Herb maintained a keen interest in fruits of his inspiration and perspiration. The authors would also like to acknowledge John Halchak, Monica Jacinto, Tim Gabb, Jim Crum, Gaylord Smith, Daniel Sanders, Lew Shoemaker, John Weber, Steve Buzolits, Brian Baker, and Dan Paulonis for their advice and contributions.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Patel, S., deBarbadillo, J., Coryell, S. (2018). Superalloy 718: Evolution of the Alloy from High to Low Temperature Application. In: Ott, E., et al. Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-89480-5_2
Download citation
DOI: https://doi.org/10.1007/978-3-319-89480-5_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-89479-9
Online ISBN: 978-3-319-89480-5
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)