Abstract
In this study, the aspect ratios of carboxymethylated and TEMPO-oxidised cellulose nanofibrils (CNF) were estimated by gel point analysis using a sedimentation approach. The flocculation and subsequent sedimentation of the CNF aqueous suspensions, which were stabilised by negative repulsive forces, were made possible after screening in concentrated salt media. The aspect ratios of the CNFs were then calculated from the linear fit (gel point) of the plot of concentration of the CNFs against the relative sediment height, using the crowding number theory.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Scandinavian Pulp, Paper and Board Testing Committee. (2002). Total acidic group content.
Benhamou, K., Dufresne, A., Magnin, A., Mortha, G., & Kaddami, H. (2014). Control of size and viscoelastic properties of nanofibrillated cellulose from palm tree by varying the TEMPO-mediated oxidation time.Carbohydrate Polymers, 99, 74–83.
Dufresne, A. (2012). Nanocellulose: from nature to high performance tailored materials. Berlin; Boston: Walter de Gruyter GmbH.
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009). Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation. Biomacromolecules, 10, 162–165.
Fukuzumi, H., Tanaka, R., Saito, T., & Isogai, A. (2014). Dispersion stability and aggregation behavior of TEMPO-oxidized cellulose nanofibrils in water as a function of salt addition. Cellulose, 21, 1553–1559.
Ishii, D., Saito, T., & Isogai, A. (2011). Viscoelastic evaluation of average length of cellulose nanofibers prepared by TEMPO-mediated oxidation. Biomacromolecules, 12, 548–550.
Isogai, A., Saito, T., & Fukuzumi, H. (2011). TEMPO-oxidized cellulose nanofibers. Nanoscale, 3, 71–85.
Jonoobi, M., Oladi, R., Davoudpour, Y., Oksman, K., Dufresne, A., Hamzeh, Y., et al. (2015). Different preparation methods and properties of nanostructured cellulose from various natural resources and residues: a review. Cellulose, 22, 935–969.
Kangas, H., Lahtinen, P., Sneck, A., Saariaho, A.-M., Laintinen, O., & Hellén, E. (2014). Characterization of fibrillated celluloses. A short review and evaluation of characteristics with a combination of methods. Nordic Pulp & Paper Research Journal, 29, 129–143.
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., et al. (2011). Nanocelluloses: A new family of nature-based materials. Angewandte Chemie International Edition, 50, 5438–5466.
Naderi, A., Lindström, T., Sundström, J., Fiberteknologi, Centrum för Biofibermaterial, B., Kth, Skolan För, K., Centra & Fiber- OCH, P. 2014. Carboxymethylated nanofibrillated cellulose: Rheological studies. Cellulose, 21, 1561–1571.
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016). Production of cellulose nanofibrils: A review of recent advances. Industrial Crops and Products.
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., et al. (2007). Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules, 8, 1934–1941.
Phan-Xuan, T., Thuresson, A., Skepö, M., Labrador, A., Bordes, R., & Matic, A. (2016). Aggregation behavior of aqueous cellulose nanocrystals: The effect of inorganic salts. Cellulose, 23, 3653–3663.
Raj, P., Mayahi, A., Lahtinen, P., Varanasi, S., Garnier, G., Martin, D., et al. (2016). Gel point as a measure of cellulose nanofibre quality and feedstock development with mechanical energy. Cellulose, 23, 3051–3064.
Saito, T., & Isogai, A. (2004). TEMPO-mediated oxidation of native cellulose. The effect of oxidation conditions on chemical and crystal structures of the water-insoluble fractions. Biomacromolecules, 5, 1983–1989.
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007). Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromolecules, 8, 2485–2491.
Siró, I., Plackett, D., Hedenqvist, M., Ankerfors, M., & Lindström, T. (2011). Highly transparent films from carboxymethylated microfibrillated cellulose: The effect of multiple homogenization steps on key properties. Journal of Applied Polymer Science, 119, 2652–2660.
Taheri, H., & Samyn, P. (2016). Effect of homogenization (microfluidization) process parameters in mechanical production of micro- and nanofibrillated cellulose on its rheological and morphological properties. Cellulose, 1–18.
Tanaka, R., Saito, T., Ishii, D., & Isogai, A. (2014). Determination of nanocellulose fibril length by shear viscosity measurement. Cellulose, 21, 1581–1589.
Varanasi, S., He, R., & Batchelor, W. (2013). Estimation of cellulose nanofibre aspect ratio from measurements of fibre suspension gel point. Cellulose, 20, 1885–1896.
Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., & Axnäs, K. (2008). The build-up of polyelectrolyte multilayers of microfibrillated cellulose and cationic polyelectrolytes. Langmuir, 24, 784–795.
Zhang, L., Batchelor, W., Varanasi, S., Tsuzuki, T., & Wang, X. (2012). Effect of cellulose nanofiber dimensions on sheet forming through filtration. Cellulose, 19, 561–574.
Acknowledgements
The authors would like to thank the Edinburgh Napier University for the provision of the 25th Anniversary studentship grant.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Onyianta, A.J., Williams, R. (2018). The Use of Sedimentation for the Estimation of Aspect Ratios of Charged Cellulose Nanofibrils. In: Fangueiro, R., Rana, S. (eds) Advances in Natural Fibre Composites. Springer, Cham. https://doi.org/10.1007/978-3-319-64641-1_17
Download citation
DOI: https://doi.org/10.1007/978-3-319-64641-1_17
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-64640-4
Online ISBN: 978-3-319-64641-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)