Abstract
Traveling on a mountainous road is attractive but questionable under aggressive climatic conditions such as extreme rainstorms. Roads are often designed in different geological complexity overlaying upper and lower terrains. The complexity of slope geometries, potential deformities, ground discontinuities, soil-rock composite nature, factors incorporated in structural integrity, the complexity associated with infrastructure developments, and unstable landform have long been causes of the increasing cost of road constructions in hills. In many instances, landform geometries and the natures of slope observed in-situ allow us to understand many salient features that we need to know in the design to mitigate landslide threats. The extent to which we make the collective effort to gather many features of landforms and their static representations concludes its validity. Findings are more forced to be based on geometrical evidence of slopes and cross-checked with an appropriate design criterion. A provision should describe a design or construction method that is deemed to comply with the site-specific conditions. Such an approach will save the enormous cost of investigations, design, and simplification for numerical evaluations, and also contribute to an indirect approach to road restoration and improve an appropriate approach for resilience to landslide hazards.
You have full access to this open access chapter, Download chapter PDF
Similar content being viewed by others
Keywords
1 Introduction
A mountain road is the most connecting way of community in a low country with far the most beautiful cities of the hill country (Fig. 1) by allowing transportation for vehicles and pedestrians. A landform is the silent feature of the ground and can be a crucial element in understanding the difficulty of infrastructure developments in the mountains. In many instances, widening mountain roads often pose a challenge in avoiding potential landslide hazards, mainly due to various landform features of the upper and lower slopes (Fig. 1).
2 Geomorphological Evidences of Failure
Landslide is often considered as a downward and outward movement of earth-formed material on hill slopes. It is usually triggered under extreme rainfall or ground shaking (seismicity). Fortunately, no records of landslides occurring during the dry season or due to seismicity are found in Sri Lanka. Geomorphological pieces of evidence such as topography, geology, hydrology, slope, groundwater, and land use are considered to be intrinsic and extrinsic variables. In contrast, extrinsic variables are accounted for improper land-use practices, roads, infrastructure developments, and man-made activities. The landslide initiation can be explained as the slip initiation of the upper sliding surface due to the loss of resistance of earth mass, where acceleration occurs towards the downward slope, and deceleration occurs in a lower section. In addition, the spatial distribution of landslide geometry clearly integrates potential energy relief of soil, rock, water, vegetative species, and other spatial element spreading over the landslide boundary. Many observations of such large-scale landslides were recorded in Sri Lanka during the last two to three decades, and some of those are depicted in Figs. 2, 3, 4, 5, 6, and 7.
The Mulhalkelle landslide (1989), Gampalakadawala (2003), and Aranayake landslide (2017) were identified as large-scale landslides in terms of physical dimensions, numbers of victims, transported earth mass volumes, damage to infrastructures, relief efforts, failure patterns, and geological complexities. All those landslides seriously impacted many road networks and economic development due to being located in agroecological zones of Sri Lanka (Panabokke 1996). Observations indicate the start of a landslide as a de-stabilization of a vast mass of earth on the hillslope, which is subjected to the high water saturation that might trigger regolith sliding on the bedrock interface. It can induce substantial failure on the adjoining steeper downslope, including large rock fragments embedded in wet soil. The moving earth masses of the Mulhalkele landslide (Fig. 3), Gampalakadawala landslide (Fig. 4), and the Aranayake Landslide (Fig. 5) contained highly saturated regolith material (unconsolidated, loose, heterogeneous superficial deposits covering soil and solid rock). It was noted that the rock-soil interface was saturated due to the propagation of the parched water table closer to the interface. Finally, the displaced material appears to have turned into a highly mobile flow, judging from damage to many elements at the lower elevation. The underlying geological structure of this area might be complex, jointed, highly foliated, and thus highly deformable structures. The rock surfaces visible on the remaining ridge have different inclinations from those exposed on the bedrock. Such geological complexities are usually difficult to explore before a landslide occurs. The mobile material appears to be weathered regolith interacting with a massive volume of groundwater during transportation of the earth material.
3 Study Background
This research aimed to develop a database of stable and unstable cut slopes (older than 20 years) through field verifications after heavy rainstorms recorded in the hilly/ mountainous areas of Sri Lanka. The research started in late 2000 by implementing the “Pre-Feasibility Study for Designing Major Roads in Landslide Area” by the Central Engineering Consultancy Bureau (CECB 2000). The project was funded by the Japan International Cooperation Agency (JICA) through the Road Development Authority (RDA) of Sri Lanka. The activity was further studied under the IPL Certified Project ID-200, 2015, titled “An assessment of the rockfall susceptibility based on cut slopes adjacent to highways and railways,” implemented by the CECB. Subsequently, the study was carried out in 2003, 2006, 2008, 2012, 2016, and 2019. In addition, the CECB has been awarded the World Center of Excellence (WCoE) (Dias et al. 2017) for Landslide Risk Reduction under the theme of “Model Policy Framework, Standards and Guidelines” by the International Programme of Landslide (IPL) since 2014. The main objective of the study is investigating the design requirements of road cut slope stability along the (a) Ratnapura-Balangoda-Haputale highway, (b) Kandy-Gampola-Nuwara Eliya highway, and (c) Kandy- Hunnasgiriya-Madamaha Nuwara-Mahiyangana highway (See Fig. 8). Considering the ages of these highways, we realize that the non-engineered remedial designs adopted for the roads have stayed in balance with the road environments for 20 years or longer.
4 Landforms in Sri Lanka
Sri Lanka is characterized by a southern-central mountain range that rises to 2524 m above sea level at its peak (Erd., 1984). According to the various findings and documentation, the island consists of seven major landform units, viz. (i) coastal plain, (ii) continental shelf, (iii) circum-island peneplain, (iv) central massif, (v) Sabaragamuwa hills, (vi) Galoya hills and (vii) Elahera ridges (Erd.,1984).The entire area is covered by various landforms, from flat erosion or peneplain to a complex assemblage of mountains, ridges, plateaus, and valleys.
The mountainous landform is mainly due to geological and erosional history, which is considered one of the oldest and most stable parts of the earth’s crust, namely Precambrian deposits in the Highland series (Cooray 1967). More than 90% of Sri Lanka is covered with highly crystalline, non-fossiliferous, Precambrian age, metamorphic rocks. These Precambrian rocks, which metamorphose under granulite facies and amphibolite facies, are subdivided into three groups based on lithology, structures, and ages of the rocks (Cooray 1984). Almost all hill country regions overlie highland series high grade, crystalline metamorphic rocks (Herath et al. 2014). The main rock types of this series are meta-sediments (quartzite, Marbles, garnet-sillimanite schists) and charnockite gneisses. Other rock types are biotite gneiss, hornblende-biotite gneiss and schists, and garnet-sillimanite gneiss (Cooray 1984).
5 Hydrological Records
In the late ‘80 s, when information was scarce, the landslide triggering rainfall threshold was placed at 200 mm in 72 h, provided rain in the area continued (Bhandari et al. 1992).
The above criterion did work partially; the probability of landslide occurrence as a rainfall intensity ratio spotlights the indicators that help assess the dynamic of rain-triggered slope movements (Bhandari and Dias 1996). This study was conducted during the ‘90 s. The conditional probabilities were only examined partially in the case of reactivation of recent, seasonally active landslides. Rainfall records for the months of landslide events tell that 24 h rainfall associated with a landslide event was generally 2 to 23 times higher than the average daily rainfall (Bhandari and Dias 1996). The empirical rule is reasonably accurate if the average annual rainfall exceeds more than 3000 mm in the wet zone of the country.
The intense rainfall of 522 mm/day followed by a tropical storm on 15th May 2003 triggered 78 landslides in the Kalawana Division. Antecedent rainfalls during the ten days before the storm reached about 272 mm, increasing the soil moisture and causing soil surface erosion in various parts of Kalawana in the Ratnapura District. In November, the total three-day rainfall reached 656 mm and was the highest in 1947 (Dias and Gunathilaka 2014).
6 Landform Geometry and Mountainous Road Infrastructure
The mountainous slopes are predominantly convex-concave form and occasionally retain a planar slope segment within dipping slopes of in-situ rock. Dipping rock surfaces and many eroded rock slopes favor the development of various instabilities, and some lead to triggering significant landslides. Slope deformities and geometries initiate the natural degradation process of soil and rock, and history can be traced back millions of years (Fig. 9).
7 Data and Method of Approach
A total of 67 records were targeted for a detailed study out of 110 records of cuttings, bank failures, or landslides, as indicated in Table 1. The study is concerned with observations on the heights of failure, stable ground conditions, failure patterns, landforms, land uses, and geologies (Fig. 10).
7.1 Failure on Upper Slope Stability
The most common instabilities in roadside slopes mainly lie in immediate upper slope landform at which land-use practices were cultivation of economic crops (tea, vegetable), forestry, or home garden. The failure patterns are commonly associated with shallow rotational or translational failures followed by a flowage mass. Observations revealed the fact that heavy rainfall events trigger failures (Fig. 11).
Weathered rock with upper slope de-stability
Soil layer contact with impermeable bedrock leads to increased pore water pressure at the interface of soil and rock and ultimately causes a significant reduction of shear strength. The maximum permissible strain of soil material cannot withstand in-situ and leads to move downward and outward movement (see Figs. 12, 13 and 14).
8 Evaluation of Landform Restoration Potential
The landslide is ‘almost all varieties of mass movements on slope including rockfalls, topples and debris flow sliding mass’ defined by Varnes 1984. The landslide body entrains a large volume of residual surface soil and then moves downstream along a gully to produce a debris flow disaster (Gao et al. 2017). The evaluation focused mainly on site-specific data collected during investigations, planning, designs, construction works, and widening of mountain roads. The number of road guidelines and specifications that describe site-specific design optimization of mountain roads is limited (Wyllie 1987). Therefore, experiences in understanding the process of slope degradation, refinements for site-specific issues, reactions to natural events, and historical records are critical tools for understanding mountain road restoration works. The findings obtained through the study will create an appropriate environment for the decision-making process for roadway designs and mountain travels.
Some of the observations of the first-hand records were bound with geological evidence, landform patterns, land use, and improving the decision-making process towards reducing landslide vulnerability of roadway. Therefore, the following observations (see Figs. 15, 16, 17, and 18) are concluded as a decision-making tool for understanding observation-based approaches for assessing the potential stability based on the refined database of the study.
8.1 In-Situ Formed Weathered Rock or Completely Weathered Soil Form Geometries
Soil slopes fail differently, depending on the site settings (upper and lower slope stability), geometry, resistance to erosion, and other topographical factors. However, the numerical simulations have shown the collapse patterns, Type-a and Type-b in Figs. 15 and 16 are less likely to occur. And resistance to collapse is mainly governed by the unsaturated soil parameters. However, any prolonged heavy rainstorms will saturate the soil surface. In such instances, shallow slope failures are significant (Russel et al. 2008). According to the site records, a relatively low-cost, eco-friendly remedial design will help enhance the slope stability.
8.2 De-Stabilized Soil, Colluvium or Rock-Soil Complex Form of Geological Sections
Type-c and Type-d geometries (Figs.17 and 18) usually contain complex forms of stability. Many uncertainties are among site-specific observations. The movements of rocks and rock-soil composites are two different modes of failure under those circumstances. Falling, rolling, bouncing, and sliding of rock are major sequences of de-stabilizing mechanisms (Brawner et al. 1975 and 1994) of failure related to the above. Therefore, a detailed study on geometries, energy, and simulations in different scenarios will conclude the appropriate remedial designs.
9 Statistical Interpretation of Data
Landform geometrical features coupled with mountain road restoration works for enhancing landslide hazard resilience were further interpreted through a statistically determined approach. Many site-specific construction works are relatively old, more than 20–30 years at the data collection, and the research has continued since 2000. The historical data usage approach mainly focused on observations of weather-associated consequences as a tool for understanding roadside slope stability potential. The statistical interpretation primarily focused on understanding the way to reduce the cost of landslide remediation work and, thus, the appropriate roadway design on a mountain slope. The landform is a feature on the terrain’s surface, which is further subdivided based on land use. We interpreted the collapsed and intact slope landforms in terms of land use, slope angle, slope height, and slope azimuth, as shown in Figs. 19, 20, and 21.
An illustrative example of the landform interpretation (Fig. 22) highlights the importance of studies on landform geometry of mountain road restoration. The studies significantly optimize the cost of total slope remedial measures against slope degradation in mountain road construction. Though observations were limited to 67 case histories, more data will support more corrective decisions during road designs.
10 Conclusion
Spatial interpretation and a case study
Hilly terrains in Sri Lanka, belonging to the humid weather pattern caused by global climate change, are wet and deserve attention in planning, designing, constructing, and maintaining mountain roads. Unsaturated residual soil formations often cover these areas, indirectly contributing to high values of apparent cohesion during the non-saturated condition. Slopes of completely weathered soils (including highly weathered rocks) retain themselves in place due to the unsaturated behavior of soils, as shown in Fig. 21. Therefore, many cut-slopes of height not exceeding 3.2 m are potentially stable or can be restored with the least cost of remedial measures.
Land use in the upper slope significantly contributes to soil restoration potential. The geological complexity of cut slope sections always needs to be toughly studied with an appropriate guideline of site-specific design.
The results of the study are summarized as follows.
-
I.
The complexity of slope geometries, potential deformities, ground discontinuities, and soil-rock composite nature are compulsory elements to understand and dominant parameters to describe the on-site stability of earth cut slope.
-
II.
Cut slopes of roads are often designed in different geological complexity overlaying upper and lower landforms. Therefore, accurate interpretation of those data is essential.
-
III.
Understanding factors incorporated in geo-structural integrity and potentially unstable landform are the key elements that decrease the cost of remedial measures on hill slopes.
-
IV.
In many instances, designing a wider section of mountain road is often challenging given landslide potential due to various landform features of upper and lower slopes.
Investigating and analyzing the soil properties and parameters that affect the stability of residual soil slope against all road cutting sections are usually expensive and time-consuming.
The above finding and approach allowed for site-specific generalization. Therefore, it is advisable to use additional criteria to predict the stability potential of cut slopes in road designs. More information about the cut slopes of mountain roads is required for more reliable prediction or design optimization.
More research on the road cut slope protections, data gathering of constructed slopes, data evaluation, and design of remedial measures will be recommended for very mountain regions/countries deep in mountains. They ultimately contribute to the development of landslide hazard resilience.
References
Attractions Sri Lanka (2019) 18 Bend Road, https://www.attractionsinsrilanka.com/travel-directory/18-bend-road/. (Last accessed on 30 Mar 2022)
Bhandari RK, Senanayake KS, Thayalan N (1991) Pitfalls in the prediction on landslide through rainfall data. In: Bell DH (ed) Landslides, 2nd edn. A.A. Balkema, Rotterdam, pp 887–890
Bhandari RK, Dias AAV (1996) Rain triggered slope movement as indicators of landslide dynamics. In: 7th international symposium on landslides, 17 21 June 1996, Trondheim, Norway
Brawner CO, Wyllie DC (1975) Rock slope stability on railway Projects. In: Proceedings American railway engineering association regional meeting, Vancouver, B. C., American Railway Engineering Association, Washington, D.C., pp 8
Brawner CO (1994) Rockfall hazard mitigation methods, participant workbook, NHI Course No. 13219. U.S. Department of Transportation, Federal Highway Administration, Publication No. FHWA SA-93-085
Cooray PG (1967) An introduction to the geology of Ceylon. Ceylon National Museum Publication, Colombo, p 324
Cooray PG (1984) Geology, with special reference to the pre-cambrian. In: Fernando CH (ed) Ecology and biogeography in Sri Lanka, The Hague, The Netherlands, W. Junk Publishers, pp 1–34
Dias AAV, Gunathilaka AAJK (2014) Evaluation of sensitivity of the WAA and SINMAP models for landslide susceptibility risk mapping in Sri Lanka. In: Proceeding of the world landslide Forum3 (WLF3), Beijing, China, 2–6 June 2014. vol 2. Landslide Science for a Safer Geoenvironment, pp 167–173
Dias AAV, Katuwala N, Herath HMJMk, Perera PVIP, Sahabandu KLS, Rupasinghe N, (2017) Model policy frameworks, standards and guidelines on disaster reduction (WCoE 2014–2017). Advancing culture of living with landslides; vol 1 ISRD-ICL Sendai Partnerships 2015–2025, pp 365–374, Springer
Erb DK (1984) Land forms and drainage. In: Fernando CH (ed) Ecology and biogeography in Sri Lanka. The Hague, The Netherlands, W. Junk Publishers, pp 35–63
Gao Y, Yin YP, Li B, Feng Z, Wang WP, Zhang N, Xing AG (2017) Characteristics and numerical runout modeling of the heavy rainfall-induced catastrophic landslide-debris flow at Sanxicun, Dujiangyan, China, following the Wenchuan Ms 8.0 earthquake. Landslides 14:1–14
Herath HM, Janaki MK, Kodagoda SSI, Dias AAV (2014) Shallow modes of slope failure in road earth cuttings in Sri Lanka. In: Landslide science for a safer geoenvironment, world landslide forum3 (WLF3), Beijing, China, 2–6 June 2014; vol 2, pp 51–58; ISBN 978-3-319-05049–2. Springer
Hiru News (2020) Traffic disrupted Daha Ata Wanguwa (18 Hairpin Bend) in Mahiyangana, https://www.hirunews.Lk /english/232733/traffic-disrupted-on-daha-ata-wanguwa-18-hairpin-bend-in-mahiyanganaya. (Last accessed on 28 Mar 2022)
Janaki HM, Herath MK, Jayasooriya JADNA, Dias AAV (2016) Geological stability of overhanging rock slopes. In: Proceedings of 2016 IPL Symposium, UNESCO, Paris November, pp 17–18
NBRO Report (1988) Mulhalkele Landslide in 1986. Zero victims and damage to the general hospital premises at the Mulahalkele, Nuwara Eliya district in Sri Lanka, NBRO 1988
Panabokke R (1996) Soils and agro-ecological environments of Sri Lanka. Natural resources, energy and science authority of Sri Lanka
Pre-Feasibility Study for Designing Major Roads in Landslide Area (Published in vol 1 & vol 2), Central Engineering Consultancy Bureau, June, 2000, Sri Lanka. Project was funded by the Japan International Cooperation Agency (JICA) through the Road Development Authority (RDA) of Sri Lanka
Russell CP, Santi P, Humphrey JD (2008) Modification and statistical analysis of the Colorado Rockfall hazard rating system: Report No. CDOT-2008-7, pp 139
Sri Lanka Red Cross Society (2016) Red cross provides first aid and relief support to flood & landslide affected. https://www.redcross.lk/main-news/180-persons-rescued-from-aranayaka-landslide-rescue-missions-well-underway/. (Last accessed 29th Mar 2022)
The Straitstimes Asia. (2017) Sri Lanka appeals for help as floods cripple water supply. https://www.Straitstime.com/asia/south-asia/sri-lanka-appeals-for-help-as-floods-cripple-water-supply. (Last accessed on 31 Mar 2022)
Varnes DJ (1984) Landslide hazard zonation: a review of principles and practice. Natural Hazards. UNESCO, Paris
Wyllie DC (1987) Rock slope inventory system. In: Proceedigs federal highway administration rockfall mitigation seminar, FHWA Region 10, Portland, Oreg., pp 25
Acknowledgements
This paper forms an integral part of the research under the World Centre of Excellence (WCoE) for Landslide Disaster Reduction implemented by the Natural Resources Management and Laboratory Services (NRMLS), Central Engineering Consultancy Bureau of the Ministry of Irrigation. It is published with their permission. However, the views expressed in the paper are those of the authors only. It is our pleasure to acknowledge Dr. (Ms.) W. A. D. Lakshani Weragoda for her valuable input for the interpretation of data and the staff of the Natural Resources Management and Laboratory Services for their continuous corporation and help extended to field works and preparation of this paper. Our thanks are due to the Eng. Iven de Silva, Chairman, Central Engineering Consultancy Bureau (CECB)/Secretary to the Ministry of Irrigation and Eng. G. R. A. S. Gunathilaka, General Manager, CECB, for the permission and encouragement.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
Copyright information
© 2023 The Author(s)
About this chapter
Cite this chapter
Virajh Dias, A.A., Herath, H.M.J.M.K., Kulathilake, L.K.N.S. (2023). Landform Geometry for Restoration of Mountain Roads and Landslide Hazard Resilience. In: Sassa, K., Konagai, K., Tiwari, B., Arbanas, Ž., Sassa, S. (eds) Progress in Landslide Research and Technology, Volume 1 Issue 1, 2022. Progress in Landslide Research and Technology. Springer, Cham. https://doi.org/10.1007/978-3-031-16898-7_25
Download citation
DOI: https://doi.org/10.1007/978-3-031-16898-7_25
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-16897-0
Online ISBN: 978-3-031-16898-7
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)