Abstract
The SDI Power and Power Conditioning program is sponsoring the development of a number of large-scale cryogenic and superconducting technologies. The largest of these programs is the development of Superconducting Magnetic Energy Storage (SMES) for terrestrial storage of energy for use in powering ground-based directed energy weapons. SMES also has application to the commercial electric utility industry, which is co-sponsoring the development of an Engineering Test Model (ETM). Other cryogenic applications under development by SDI for use in space power systems include hydrogen-cooled cryo-conductors, superconducting turbo-alternators and high temperature superconductor power leads.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
“Preliminary Assessment of Primary Power Supply Options for Ground-Based Laser Installations,” prepared by Bechtel National, for Belvoir Research, Development and Engineering Center, Contract No. DAAK70-86-0606 (1986).
W. J. Sommers and R. A. Weed, Power for the ground-based free electron laser, in: “Proc. of the 1988 ASME Winter Annual Mtg.” MD-Vol. 11, ASME, New York (1988).
R. J. Loyd, Bechtel’s program in superconducting magnetic energy storage, in: Supercurrents. Vol. 2, Belmont, California (1988), p. 1–6.
S. M. Schoenung, R. C. Ender, and T. E. Walsh, Utility benefits of superconducting magnetic energy storage, in: “Proc. of the Am. Power Conf.” Chicago (1989).
J. D. Rogers, W. V. Hassenzahl, and R. I. Schermer, “1-GWh Diurnal Load- Leveling Superconducting Magnetic Energy Storage System Reference Design,” Report LA-7885-MS, Los Alamos National Laboratory (1980).
R. J. Loyd et al, “Design Improvements and Cost Reductions for a 5000 MWh Superconducting Magnetic Energy Storage Plant - Part 1,” Report LA-10320-MS, (1984) and “Part 2,” Report LA-10668-MS, Los Alamos (1985).
R. J. Loyd et al, “Conceptual Design and Cost of a Superconducting Magnetic Energy Storage Plant,” Electric Power Research Inst. Rpt. EM-3457 (1984).
“Superconductive Energy Storage, Wisconsin Superconductive Energy Storage Project,” Report EES No. 53, Engineering Experiment Station, University of Wisconsin-Madison, Wisconsin (1983).
J. J. Skiles et al, Experimental experience with a superconducting magnetic energy storage (SMES) device on line, in: “Proc. of the Am. Power Conf.” (1989).
C.A. Luongo and R. J. Loyd, Superconducting magnetic energy storage for electric utility load leveling: a study of cost vs. stored energy, in: “Proc. of the Am. Power Conf.” Chicago (1987).
W. Hassenzahl, Superconducting magnetic energy storage, IEEE Trans. Mag. 25:2 (1989).
“Program Plan: Development of a Superconducting Magnetic Energy Storage Engineering Test Model,” Electric Power Research Institute, Palo Alto (1986).
P. G. Filios, A feasibility demonstration program for magnetic superconducting energy storage, in: “Proc. of the Am. Power Conf” Vol. 50, Chicago (1988).
S. M., Schoenung, W. V. Hassenzahl, and P. G. Filios, U.S. program to develop superconducting magnetic energy storage, in: “Proc. of the 23rd Intersociety Energy Conversion Eng. Conf.” ASME, New York (1988).
J. D. Rogers et al, 30-MJ superconducting magnetic energy storage system for electric utility transmission stabilization, Proc. IEEE 71:9 (1983).
J. Colvin et al, SMES conductor test program, IEEE Trans. Mag. 25:2 (1989).
“The Breakthrough Team for Tomorrow,” Ebasco/SMES-Wisconsin, Madison (1989).
D. L. Walker et al, SMES conductor design, IEEE Trans. Mag. 25:2 (1989).
R. J. Loyd et al, Coil protection for a utility scale superconducting magnetic energy storage plant, IEEE Trans. Power App. Svs. 86SM470-9 (1986).
G. E. Mcintosh et al, Protection system for superconducting magnetic energy storage unit, in: “Advances in Cryogenic Engineering,” Vol. 33, Plenum Press, New York (1988).
C. A. Luongo et al, Thermal-hydraulic simulation of helium expulsion from a cable- in-conduit conductor, IEEE Trans. Mag. 25:2 (1989).
C. E. Oberly and J. C. Ho, The Origin and future of composite aluminum conductors, in: “Proc. of this Conference” (1989).
S. K. Singh, Compact cryogenic inductors, in: “Proc. of this Conference” (1989).
W. V. Hassenzahl, Prospects for the use of high Tc materials for superconducting magnetic energy storage, in: “Proc.: Workshop on High Temperature Superconductivity,” EL/ER-5571-P-SR, Electric Power Research Institute, Palo Alto (1988).
Y. M. Eyssa et al, The potential impact of developing high Tc superconductors on superconductive magnetic energy storage (SMES), in: “Advances in Cryogenic Engineering,” Vol. 34 (1988).
T. Yoshihara et al, Design Study of SMES system using high temperature superconductors, in: “Proc. 10th Magnetic Tech. Conf.” Boston (1987); and J. Hasegawa, Economic considerations of SMES with high Tc superconductors, Hokkaido University, Japan (1987).
W. N. Lawless et al, “Technology Assessment and Recommendations for Extruded Down-Lead of YBCO,” CeramPhysics, Westerville, Ohio (1988).
J. R. Hull, High-temperature superconducting current leads for cryogenic apparatus, in: “Proc. of the 24th Intersociety Energy Conversion Eng. Conf.” AIAA, Washington, D. C. (1989).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1990 Springer Science+Business Media New York
About this chapter
Cite this chapter
Verga, R.L. (1990). Superconducting Magnetic Energy Storage and Other Large-Scale SDI Cryogenic Applications Programs. In: Fast, R.W. (eds) Advances in Cryogenic Engineering. Advances in Cryogenic Engineering, vol 35. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-0639-9_65
Download citation
DOI: https://doi.org/10.1007/978-1-4613-0639-9_65
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4612-7904-4
Online ISBN: 978-1-4613-0639-9
eBook Packages: Springer Book Archive