Abstract
Properties of electroless Ni–P plated polyester fabric mainly depend on the plating bath constituents/conditions. The effects of NiSO4 concentration of the plating bath on the deposition rate, phosphorus content, surface morphology, and crystal structure of the electroless Ni–P plated polyester fabric were investigated. The study revealed that phosphorus content in the deposits decreased at higher NiSO4 concentration. SEM micrographs showed that nodule size of the Ni–P deposits increased. All the Ni–P deposits had an amorphous structure. The electromagnetic interference (EMI) shielding effectiveness (SE) of electroless Ni–P plated polyester fabric was evaluated. With the rise of nickel ion in the solution, the EMI SE of the Ni–P plated polyester fabric increased.
Similar content being viewed by others
References
Tong, XCC (ed.) Advanced Materials and Design for Electromagnetic Interference Shielding. CRC Press/Taylor & Francis, Boca Raton, FL (2009)
Choi, YS, Yoo, YH, Kim, JG, Kim, SH, “A Comparison of the Corrosion Resistance of Cu–Ni–Stainless Steel Multilayers Used for EMI Shielding.” Surf. Coat. Technol., 201 3775–3782 (2006)
Kasevich, RS, “Cellphones, Radars, and Health.” IEEE Spectrum, 39 15–16 (2002)
Tracton, AA (ed.) Coatings Technology: Fundamentals, Testing, and Processing Techniques. CRC Press, Boca Raton, FL (2006)
Lai, K, Sun, RJ, Chen, MY, Wu, H, Zha, AX, “Electromagnetic Shielding Effectiveness of Fabrics with Metallized Polyester Filaments.” Text. Res. J., 77 (4) 242–246 (2007)
Guo, RH, Jiang, SQ, Yuen, CWM, Ng, MCF, “Effect of Copper Content on The Properties of Ni–Cu–P Plated Polyester Fabric.” J. Appl. Electrochem., 39 (6) 907–912 (2009)
Amberg, M, Grieder, K, Barbadoro, P, Heuberger, M, Hegemann, D, “Electromechanical Behavior of Nanoscale Silver Coatings on PET Fibers.” Plasma Process. Polym., 5 874–880 (2008)
Smith, WC, “Metallized Fabrics—Techniques and Applications.” J. Coat. Fabrics, 17 242–252 (1988)
Bula, K, Koprowska, J, Janukiewicz, J, “Application of Cathode Sputtering for Obtaining Ultra-Thin Metallic Coatings on Textile Products.” Fibers Text. East. Eur., 14 (5) 75–79 (2006)
Jiang, SQ, Newton, E, Yuen, CWM, Kan, CW, “Chemical Silver Plating on Cotton and Polyester Fabrics and Its Application on Fabric Design.” Text. Res. J., 76 (1) 57–65 (2006)
Guo, RH, Jiang, SQ, Yuen, CWM, Ng, MCF, “An Alternative Process for Electroless Copper Plating on Polyester Fabric.” J. Mater. Sci. Mater. Electron., 20 33–38 (2009)
Mallory, GO, Hadju, JB (eds.), Electroless Plating. The American Electroplaters and Surface Finishers Society, Orlando, FL (1990)
Riedel, W (ed.) Electroless Nickel Plating. Finishing Publishers Ltd., England (1991)
Mahallawy, NE, Bakkar, A, Shoeib, M, Palkowski, H, Neubert, V, “Electroless Ni–P Coating of Different Magnesium Alloys.” Surf. Coat. Technol., 202 (21) 5151–5157 (2008)
Hu, YJ, Xiong, L, Meng, JL, “Electron Microscopic Study on Interfacial Characterization of Electroless Ni–W–P Plating on Aluminium Alloy.” Appl. Surf. Sci., 253 (11) 5029–5034 (2007)
Guo, SW, Li, LB, Zhang, GY, Wang, WY, Zhao, XZ, “Stress Analysis at The Interface Between Ni–P Coating and SiCp/Al Substrate of Space Mirror.” Appl. Surf. Sci., 255 (6) 3691–3695 (2009)
Yuen, CWM, Jiang, SQ, Kan, CW, “Influence of Surface Treatment on The Electroless Nickel Plating of Textile Fabric.” Appl. Surf. Sci., 253 5250–5257 (2007)
Simor, M, Rahel, J, Cernak, M, “Atmospheric-pressure Plasma Treatment of Polyester Nonwoven Fabrics for Electroless Plating.” Surf. Coat. Technol., 172 1–6 (2003)
Jiang, SQ, Kan, CW, Yuen, CWM, Wong, WK, “Electroless Nickel Plating of Polyester Fiber.” J. Appl. Poly. Sci., 108 2630–2637 (2008)
Guo, RH, Jiang, SQ, Yuen, CWM, Ng, MCF, “Temperature Dependence of Electroless Ni–P Deposition on Polyester Fabric.” Surf. Rev. Lett., 15 (5) 587–593 (2008)
Guo, RH, Jiang, SQ, Yuen, CWM, Ng, MCF, “Microstructure and Electromagnetic Interference Shielding Effectiveness of Electroless Ni–P Plated Polyester Fabric.” J. Mater. Sci. Mater. Electron., 20 (8) 735–740 (2009)
Gad, MR, El-magd, A, “Additives for Electroless Nickel Alloy Coating Processes.” Met. Fin., 99 (2) 77–83 (2001)
Chen, BH, Hong, L, Ma, Y, Ko, TM, “Effects of Surfactants in an Electroless Nickel-Plating Bath on The Properties of Ni−P Alloy Deposits.” Ind. Eng. Chem. Res., 41 (11) 2668–2678 (2002)
Chen, CJ, Lin, KL, “Internal Stress and Adhesion of Amorphous Ni-Cu-P Alloy on Aluminum.” Thin Solid Films, 370 106–113 (2000)
Balaraju, JN, Sankara Narayanan, TSN, Seshadri, SK, “Structure and Phase Transformation Behaviour of Electroless Ni–P Composite Coatings.” Mater. Res. Bull., 41 847–860 (2006)
Baskaran, I, Sankara Narayanan, TSN, Stephen, A, “Effect of Accelerators and Stabilizers on the Formation and Characteristics of Electroless Ni–P Deposits.” Mater. Chem. Phys., 99 (1) 117–126 (2006)
Warren, BE (ed.) X-ray Diffraction. Dover Publications, New York (1990)
Gao, Y, Huang, L, Zheng, ZJ, Li, H, Zhu, M, “The Influence of Cobalt on the Corrosion Resistance and Electromagnetic Shielding of Electroless Ni–Co–P Deposits on Al Substrate.” Appl. Surf. Sci., 253 9470–9475 (2007)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Guo, R.H., Jiang, S.Q., Yuen, C.W.M. et al. Influence of nickel ions for electroless Ni–P plating on polyester fabric. J Coat Technol Res 9, 171–176 (2012). https://doi.org/10.1007/s11998-009-9227-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-009-9227-8