The effect of impact-oscillation loading of a given intensity on the hardness of the surface layers of the D16ChATW aluminum alloy was evaluated, in particular, using nanosolutions of tungsten carbide, carbon, as well as Al + Cu and Al + Cu + Mg nanosolutions at a concentration of 50:50% and 33:33:33%, respectively. The relationship between the parameters of dynamic non-equilibrium processes which change the structural phase state and mechanical properties of the alloy and the surface hardness of the material, was identified and described.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
J. Weertman, “Plastic deformation behind strong shock waves,” Mech. of Mater., 5, Is. 1, 13–28 (1986); https://doi.org/10.1016/0167-6636(86)90012-8
E. M. Bringa, A. Caro, Y. Wang, M. Victoria, J. M. McNaney, B. A. Remington, R. F. Smith, B. R. Torralva, and H. Van Swygenhoven, “Materials science: Ultrahigh strength in nanocrystalline materials under shock loading,” Science, 309, Is. 5742, 1838–1841 (2005); https://doi.org/10.1126/science.1116723
V. E. Panin, and V. E. Egorushkin, “Nonequilibrium thermodynamics of a deformed solid as a multiscale system. Corpuscular-wave dualism of plastic shear,” Physical Mesomechanics, 11, Iss. 3–4, 105–123 (2008); https://doi.org/10.1016/j.physme.2008.07.001
J. Kestin, “Thermodynamics of Plastic Deformation,” in: D. Walgraef (Ed.) Patterns, Defects and Microstructures in Nonequilibrium Systems, NATO ASI Series, Springer, Dordrecht (1987); https://doi.org/10.1007/978-94-009-3559-4_12
A. E. Mayer, K. V. Khishchenko, P. R. Levashov, and P. N. Mayer, “Modeling of plasticity and fracture of metals at shock loading,” J. Appl. Phys., 113, Is. 19, art. no. 193508 (2013); https://doi.org/10.1063/1.4805713
P. Bellon, and G. Martin, “Cascade effects in a nonequilibrium phase transition with metallurgical relevance,” Phys. Rev., B, 39, Is. 4, 2403–2410 (1989); https://doi.org/10.1103/PhysRevB.39.2403
J. Sharma, R. W. Armstrong, W. L. Elban, C. S. Coffey, and H. W. Sandusky, “Nanofractography of shocked RDX explosive crystals with atomic force microscopy,” Appl. Phys. Let., 78, Is. 4, 457–459 (2001); https://doi.org/10.1063/1.1342046
E. B. Zaretsky, “X-Ray diffraction evidence for the role of stacking faults in plastic deformation of solids under shock loading,” Shock Waves, 2, Is. 2, 113–116 (1992); https://doi.org/10.1007/BF01415899
E. N. Borodin, and V. Bratov, “Non-equilibrium approach to prediction of microstructure evolution for metals undergoing severe plastic deformation,” Mater. Characterization, 141, 267–278 (2018); https://doi.org/https://doi.org/10.1016/j.matchar.2018.05.002
I. K. Razumov., Y. N. Gornostyrev, and A. E. Ermakov, “Scenarios of nonequilibrium phase transformations in alloys depending on the temperature and intensity of plastic deformation,” Phys. Metals Metallogr., 119, Is. 12, 1133–1140 (2018); https://doi.org/10.1134/S0031918X18120177
M. Chausov, J. Brezinova, E. Zasimchuk, P. Maruschak, O. Khyzhun, A. Pylypenko, P. Bazarnik, and J. Brezina, “Effect of structure self- organization of aluminum alloy D16ChATW under impact-oscillatory loading on its fatigue life,” J. of Mater. Eng. and Perform., 30, Is. 8, 6235–6242 (2021); https://doi.org/10.1007/s11665-021-05868-0
M. Chausov, E. Zasimchuk, P. Maruschak, O. Khyzhun, A. Pylypenko, O. Prentkovskis, and J. Brezinová, “Influence of impact- oscillatory loading on fatigue life of aluminum alloy 2024-T351,” Iranian J. of Sci. and Technol., Transact. of Mech. Eng., 46, Is. 4, 875–884 (2022); https://doi.org/10.1007/s40997-021-00443-3
M. Chausov, A. Pylypenko, P. Maruschak, V. Zasimchuk, J. Brezinová, J. Brezina, and J. Viňáš, “Impact of the initial phase composition of alloys on the effects manifested by yield sites that occur on sheet aluminum alloys subjected to impact-oscillatory loading,” Materials, 16, Is. 1, art. no. 249 (2022); https://doi.org/10.3390/ma16010249
V. V. Azharonok, N. Kh. Belous, S. P. Rodtsevich, S. V. Goncharik, N. N. Chubrik, V. D. Koshevar, K. G. Lopat’ko, E. G. Aftandilyants, A. N. Veklich, V. F. Boretskii, and A. I. Orlovich, “Influence of acoustic and electromagnetic actions on the properties of aqueous nanoparticle dispersions used as tempering liquids for dental cement,” J. of Eng. Phys. and Thermophys., 89, Is. 3, 702–713 (2016); https://doi.org/10.1007/s10891-016-1429-1
M. G. Chausov, V.G. Kaplunenko, M. V, Kosinov, and K. M. Porokhniuk, Method of Modification of Mechanical Properties of Materials [in Ukrainian], Patent of Ukraine No. 98493, Publ. on 25.05.2012, Bull. No 10.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 59, No. 2, pp. 62–66, March–April, 2023.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Chausov, M.G., Maruschak, P.O. & Pylypenko, A.P. The Influence of Impac-Oscilation Loading on the Hardness of Surface Layers of D16ChATW Aluminum Alloy. Mater Sci 59, 186–190 (2023). https://doi.org/10.1007/s11003-024-00761-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-024-00761-2