Skip to main content

Advertisement

SpringerLink
Log in

Seismic response of slender storage tanks on tube feet or skirt support

  • S.I. : Natech Risk Assessment of Hazardous Facilities
  • Published:
Bulletin of Earthquake Engineering Aims and scope Submit manuscript

Abstract

Slender storage tanks on tube feet or skirt support are essential components of industrial facilities and often contain large amounts of hazardous liquid. As the geometry of such storage tanks with torispherical heads is somewhat standardised, seismically induced stresses and anchoring forces are often calculated by the equipment manufacturer in a simplified and conservative way. Thereby, the hydrodynamic effects of the stored liquid are usually not taken into account. This often leads to high resulting anchoring forces that may exceed the typical bearing resistance of the discrete anchoring at the tube feet or skirt support. In this paper, a procedure is suggested that lowers the overall stress resultants by determining the tank’s response in a more differentiated way. It is based on calculating the hydrodynamic pressure and load components as a function of the geometrical characteristics of the tank. The general concept was developed for flat bottom tanks but can be transferred—with certain adjustments—to the considered slender storage tanks on tube feet or skirts. Emphasis is set on the potential for energy dissipation and on the choice of appropriate response acceleration and response spectra, respectively, which is different for the individual load components. The suggested procedure is prepared for easy-to-use application by providing simple formulas and tabulated coefficients. Its capability for design load reduction in comparison to the simplified calculation method is shown on an exemplary case study.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  • AD 2000 S 3/0 guideline (2016) General safety verification for pressure vessels – principles

  • AD 2000 S 3/1 guideline (2018) General safety verification for pressure vessels – vessels with torispherical heads on skirts

  • AD 2000 S 3/3 guideline (2001) General safety verification for pressure vessels – vessels with torispherical heads on feet

  • API 650 (2013) Welded tanks for oil storage. American Petroleum Institute Standards

  • Applied Technology Council (2018) Recommendations for improved seismic performance of nonstructural components, NIST GCR 18-917-43

  • ASCE/SEI 7-16 (2017) Minimum design loads and associated criteria for buildings and other structures, American society of civil engineers

  • AWWA D100-11 (2011) Welded carbon steel tanks for water storage, American water works association

  • Berahman F, Behnamfar F (2007) Seismic fragility curves for un-anchored on-grade steel storage tanks: bayesian approach. J Earthq Eng 11:166–192

    Article  Google Scholar 

  • Bronstein IN, Semendjajew KA (1996) Teubner-Taschenbuch der Mathematik (Teubner paperback of mathematics). In: Zeidler E, Teubner Verlagsgesellschaft. ISBN 3-8154-2001-6

  • Brunesi E, Nascimbene R, Pagani M, Beilic D (2015) Seismic performance of storage steel tanks during the May 2012 Emilia, Italy, Earthquakes. J Perform Constr Facil 29(5):04014137

    Article  Google Scholar 

  • Butenweg C, Holtschoppen B (2019) Seismic design of structures and components in industrial units. In: Meskouris K, Butenweg C, Hinzen KG, Höffer R (eds) Structural dynamics with applications in earthquake and wind engineering, 2nd edn. Springer, New York

    Google Scholar 

  • Chopra AK (2007) Dynamics of structures. Pearson Prentice Hall, New Jersey

    Google Scholar 

  • Clough DP (1977) Experimental evaluation of seismic design methods for broad cylindrical tanks. Report No. UCB/EERC-77/10, University of Califorina, Berkeley, California

  • Cornelissen P (2010) Erarbeitung eines vereinfachten impulsiv-flexiblen Lastansatzes für die Berechnung von Tankbauwerken unter Erdbebenlast (Derivation of a simplified impulsive-flexible load approach for the calculation of seismically loaded tanks). Diploma thesis at the chair of structural analysis and dynamics of RWTH Aachen University

  • Courtesy of SDA-engineering GmbH, Germany, www.sda-engineering.de, anonymized project

  • Courtesy of Thaletec GmbH, Thale, Germany, www.thaletec.com

  • Dazio A, Beyer K, Braune F, Fritsche S, Mittaz X (2009) Das MW = 6.3 Erdbeben von L’Aquila am 6. April 2009 – Bericht der SGEB-Erkundungsmission vom 15. – 18. April 2009. Swiss Society for Earthquake Engineering and Structural Dynamics

  • DIN 28018/DIN 28019 (2006) pressure vessels, glass lined steel – vessels for production plants

  • DIN 28011 (2012) Gewölbte Böden – Klöpperform (torispherical heads)

  • DIN EN 1998-1/NA (2021) National annex for Germany – Nationally determined parameters – Eurocode 8: design of structures for earthquake resistance – part 1: general rules, seismic actions and rules for buildings

  • EN 1990 (2005) Eurocode 0: basis of structural design

  • EN 1998-4 (2006) Eurocode 8: design of structures for earthquake resistance – part 4: silos, tanks and pipelines

  • EN 1998-1 (2010) Eurocode 8: design of structures for earthquake resistance – part 1: general rules, seismic actions and rules for buildings

  • Erdik M (2000) Report on 1999 Kocaeli and Düzce (Turkey) earthquakes. In: Structural control for civil and infrastructure engineering. pp 149–186

  • Fischer FD (1979a) Dynamic fluid effects in liquid-filled flexible cylindrical tanks. Earthq Eng Struct Dynam 7:587–601

    Article  Google Scholar 

  • Fischer FD (1979b) Näherungsweise Ermittlung des Membranspannungszustandes in erdbebenbeanspruchten, flüssigkeitsgefüllten Tankbauwerken (Approximate determination of membrane stress state in seismically loaded liquid-filled tanks). In: Conference proceedings Schalenbeulentagung Darmstadt. pp 45–61

  • Fischer FD (1981) Ein Vorschlag zur erdbebensicheren Bemessung von flüssigkeitsgefüllten zylindrischen Tankbauwerken (A proposal for the earthquake-resistant design of liquid-filled cylindrical tanks), Der Stahlbau, Vol 50 1/1981. pp 13–20

  • Fischer FD, Rammerstorfer FG (1982) The stability of liquid-filled cylindrical shells under dynamic loading. In: Ramm E (ed) Buckling of shells, proceedings of a state-of-the-art colloquium at the University of Stuttgart. pp 569–597

  • Fischer FD, Rammerstorfer FG (1999) A refined analysis of sloshing effects in seismically excited tanks. Int J Press Vessels Pip 76:693–709

    Article  Google Scholar 

  • Fischer FD, Rammerstorfer FG, Scharf K (1991) Earthquake resistant design of anchored and unanchored liquid storage tanks under three-dimensional earthquake excitation. In: Schuëller GI (Ed) Structural dynamics. pp 317–371

  • Gonzales E, Almazán J, Belrán J, Herrera R, Sandoval V (2013) Performance of stainless steel winery tanks during the 02/27/2010 Maule earthquake. Eng Struct 56:1402–1218

    Article  Google Scholar 

  • Habenberger J (2001) Beitrag zur Berechnung von nachgiebig gelagerten Behältertragwerken unter seismischen Einwirkungen (Contribution on the calculation of flexibly supported tank structures for seismic actions). PhD thesis at Bauhaus-Universität Weimar, Germany

  • Haroun MA (1980) Dynamic analyses of liquid storage tanks. Report of the California Institute of Technology Earthquake Engineering Research Laboratory

  • Holl H (1987) Parameteruntersuchung zur Abgrenzung der Anwendbarkeit eines Berechnungskonzeptes für erdbebenbeanspruchte Tankbauwerke (Parameter investigation to delimit the applicability of a calculation concept for tank structures subjected to seismic loads). Report 1/87 of the Institute of light weight structures and aircraft construction of the Technical University Vienna

  • Holtschoppen B (2009) Beitrag zur Auslegung von Industrieanlagen auf seismische Belastungen (Contribution on seismic design of industrial facilities). PhD thesis at RWTH Aachen University

  • Housner GW (1963) The dynamic behavior of water tanks. Bull Seismol Soc Am 53:381–387

    Article  Google Scholar 

  • Kettler M (2004) Earthquake design of large liquid-filled steel storage tanks. Diploma Thesis at the Institute for Steel Constructions at the Technical University of Graz

  • Knoedel P, Gkatzogiannis S, Holtschoppen B, Ummenhofer T (2022) Seismic design of elevated silos and tanks – a study on behaviour factors, SSDS 2022, Aveiro, Portugal

  • Krausmann E, Cruz AM, Affeltranger B (2010) The impact of the 12 May 2008 Wenchuan earthquake on industrial facilities. J Loss Prev Process Ind 23:242–248

    Article  Google Scholar 

  • Malhotra PK (2006) Earthquake induced sloshing in tanks with insufficient freeboard. Struct Eng Int 3(2006):222–225

    Article  Google Scholar 

  • Malhotra PK (2021) Seismic response of liquid-storage tanks. In: Malhotra PK (ed) Seismic analysis of structures and equipment. Springer, New York

    Chapter  Google Scholar 

  • Malhotra PK, Wenk T, Wieland M (2000) Simple procedure for seismic analysis of liquid-storage tanks. Struct Eng Int 3(2000):197–201

    Article  Google Scholar 

  • Manos GC (1991) Evaluation of the earthquake performance of anchored wine tanks during the San Juan, Argentina, 1977 Earthquake. Earthq Eng Struct Dynam 20:1099–1114

    Article  Google Scholar 

  • NCh2369 (2003) Earthquake-resistant design of industrial structures and facilities, Instituto Nacional de Normalizacion Chile

  • NZSEE Seismic Design of Storage Tanks (2009), New Zealand society for earthquake engineering, recommendations of a NZSEE study group on seismic design of storage tanks

  • O’Rourke MJ, So P (2000) Seismic fragility curves for on-grade steel tanks. Earthq Spectra 16(4):801–815

    Article  Google Scholar 

  • Phan HN, Paolacci F, Alessandri S (2016) fragility analysis methods for steel storage tanks in seismic prone areas. In: ASME 2016 pressure vessels and piping conference, Vancouver, Canada

  • Rammerstorfer FG, Fischer FD (2004) Ein Vorschlag zur Ermittlung von Belastungen und Beanspruchungen von zylindrischen, flüssigkeitsgefüllten Tankbauwerken bei Erdbebeneinwirkung (A proposal for the determination of loads and stresses of cylindrical liquid-filled tanks under seismic excitation). Revised Edition of the institute report ILFB-2/90, Institute of lightweight construction and structural and biomechanics (ILSB) of Technical University Vienna, Austria

  • Sakai F, Ogawa H, Isoe A (1984) Horizontal, vertical and rocking fluid-elastic response and design of cylindrical liquid storage tanks. In: Proc. 8th WCEE, San Francisco

  • Salzano E, Iervolino I, Fabbrocino G (2003) Seismic risk of admospheric storage tanks in the framework of quantitative risk analysis. J Loss Prev Process Ind 16(5):403–409

    Article  Google Scholar 

  • Scharf, K. (1990) Beiträge zur Erfassung des Verhaltens von erdbebenerregten, oberirdischen Tankbauwerken. Thesis at the Technical University of Vienna

  • Sigloch H (2009) Technische Fluiddynamik (Technical fluid dynamics), 7th edn. Springer, New York

    Google Scholar 

  • Veletsos AS (1974) Seismic effects in flexible liquid storage tanks. In: Proceedings of the 5th World Conference on Earthquake Engineering, Rome. pp 630–639

  • Veletsos AS (1984) Seismic response and design of liquid storage tanks. In: ASCE committee on gas and liquid fuel lifelines: guidelines for the seismic design of oil and gas pipeline systems. pp 255–370

  • Veletsos AS, Yang JY (1977) Earthquake response of liquid-storage tanks. In: Proceedings of the second engineering mechanics specialty conference, ASCE. pp 1–24

  • Verband der Chemischen Industrie e.V. (VCI) (2023) VCI-Leitfaden – der Lastfall Erdbeben im Anlagenbau (VCI Technical Guideline – the seismic load case in plant engineering). Guideline document + commentary document for the design, dimensioning and construction of structures and components in the chemical industry based on DIN EN 1998-1, 3rd edn. Rev. 03/2023, available in German and English

  • www.pexels.com; free stock photo by Tom Fisk

  • Yang JY (1976) Dynamic behavior of fluid-tank systems. PhD thesis at the Rice University in Houston, Texas

Download references

Funding

The authors declare that no funds, grants, or other support were received during the preparation of this manuscript.

Author information

Authors and Affiliations

  1. SDA-engineering GmbH, Herzogenrath, Germany

    Britta Holtschoppen

  2. Dr Knoedel Engineering Consultants, Karlsruhe, Germany

    Peter Knoedel

Authors
  1. Britta Holtschoppen
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Peter Knoedel
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Britta Holtschoppen.

Ethics declarations

Conflict of interest

The authors have no relevant financial or non-financial interests to disclose.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Holtschoppen, B., Knoedel, P. Seismic response of slender storage tanks on tube feet or skirt support. Bull Earthquake Eng 22, 55–73 (2024). https://doi.org/10.1007/s10518-023-01704-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10518-023-01704-z

Keywords

Search

Navigation