Abstract
Purpose
In the standard design method of straight dipole magnets, the good field region is symmetric to the magnet mechanical center both in 2D and in 3D, so the obtained field quality is not the actual one because the field integration lines are not consistent with the curved beam paths. In this paper, an improved method for straight dipole magnets aiming at obtaining accurate field quality is proposed.
Methods
The field quality is calculated by taking into account the relationship of the good field region to the magnet straight geometry. General description of the improved method is introduced, and two application examples of straight dipole magnets are presented to investigate the detailed field quality difference between the improved and traditional methods. The result of the improved method is also compared with the field quality calculated along particle trajectory in OPERA-3D.
Results
It is shown that the difference in field quality between the improved and traditional methods cannot be neglected, and the field quality in the improved method is very close to the one calculated along real beam paths.
Conclusion
The field quality in the improved method is accurate enough for practical application in a straight dipole magnet.
Similar content being viewed by others
References
J. Tanabe, Iron Dominated Electromagnets: Design, Fabrication, Assembly and Measurements (World Scientific, Singapore, 2005), pp. 16–274
T. Zickler, in Basic design and engineering of normal-conducting, iron-dominated electromagnets, ed. by D. Brandt Proceedings of the CAS–CERN Accelerator School: Magnets, Bruges, Belgium, CERN-2010-004 (2009), p. 65
S. Russenschuck, Field Computation for Accelerator Magnets: Analytical and Numerical Methods for Electromagnetic Design and Optimization (Wiley, Weinheim, 2010), pp. 269–388
E. Huttel, J. Tanabe, A. Jackson et al., The storage ring magnets of the Australian Synchrotron, in Proceedings of EPAC 2004, Lucerne, Switzerland (2004), pp. 1666–1668
J. Corbett, D. Dell’Orco, Y. Nosochkov et al., Multipole spilldown in the SPEAR 3 dipole magnets, in Proceedings of the 1999 Particle Accelerator Conference (New York, 1999), pp. 2355–2357
J. Ohnishi, M. Kawakami, K. Fujii et al., Results of magnetic field measurements of Spring-8 magnets. IEEE Trans. Magn. 32, 3069 (1996)
T. Becker, D. Kramer, S. Kuchler et al., Prototype development of the BESSY II Storage Ring magnetic elements, in Proceedings of the 1995 Particle Accelerator Conference (Dallas, 1995), pp. 1325–1327
R. Keller, Final analysis of the ALS lattice magnet data, in Proceedings of the 1993 Particle Accelerator Conference (Washington, 1993), pp. 2811–2813
W. Chen, C.T. Shi, B.G. Yin et al., End chamfer study and field measurements of the BEPCII dipoles, in Proceedings of 2005 Particle Accelerator Conference (Knoxville, Tennessee, 2005), pp. 919–921
Q. Zhou, Z. Cao, Y. Sun et al., The magnet design of the SSRF storage ring and booster. IEEE Trans. Appl. Supercond. 10, 256 (2000)
V.S. Kashikhin, M. Borland, G. Chlachidze et al., Longitudinal gradient dipole nagnet prototype for APS at ANL. IEEE Trans. Appl. Supercond. 26, 4002505 (2016)
F. Saeidi, R. Pourimani, J. Rahighi et al., Normal conducting superbend in an ultralow emittance storage ring. Phys. Rev. ST Accel. Beams 18, 082401 (2015)
F. Saeidi, M. Razazian, J. Rahighi et al., Magnet design for an ultralow emittance storage ring. Phys. Rev. Accel. Beams 19, 032401 (2016)
S. Wang, Y. An, S. Fang et al., An overview of design for CSNS/RCS and beam transport. Sci. China Phys. Mech. Astron. 54, s239 (2011)
Y.-S. Zhu, M. Yang, Z. Zhang et al., Design and end chamfer simulation of PEFP beam line curved dipole magnets. Chin. Phys. C 35, 684 (2011)
C. Zhang, L. Ma, Design and Development of Accelerator for Beijing Electron Positron Collider Upgrade Project (Shanghai Science and Technology Press, Shanghai, 2015), p. 296. (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhu, Y., Chen, F., Kang, W. et al. Accurate calculation of field quality in conventional straight dipole magnets. Radiat Detect Technol Methods 2, 14 (2018). https://doi.org/10.1007/s41605-018-0046-2
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s41605-018-0046-2