Abstract
Nickel-based superalloys have served as the most competitive high temperature structural materials under highly stressed and aggressive operating conditions in a variety of applications for more than 60 years. The most demanding among all the applications has been the gas turbine aerofoil castings of modern aero-engines. These turbine parts operate in extremely aggressive environment of high velocity hot combustion gas-air mixture carrying highly corrosive ingredients at high pressure. Gas turbine aerofoil materials should therefore possess adequate resistance to creep, fatigue and aggressive environment. Materials design for such application therefore has been extremely challenging, particularly since the engine designers always aim at higher turbine entry temperature (TET) in order to achieve greater engine thrust and better fuel efficiency. In spite of enormous efforts made in the recent past towards developing ceramics and their composites, Ni-based superalloys continue to be most reliable blade and vane materials offering always the highest TET. This has been possible through better alloy design, improved blade cooling schemes, protective coatings and directional solidification (DS) of either columnar grains or single crystals (SC) along the most favorable 〈001〉 texture. During the last six decades, TET has gone up by about 500K. This article covers recent advances in cast Ni-based superalloys, including our own efforts in this direction. Extensive research at DMRL has led to the development of new generation Ni-based superalloys, designated as DMD-4 and DMS-4 for DS and SC processing, respectively. Simultaneously, expertise has been developed to cast DS and SC components for aero-engines. Technology has also been established for pilot scale production of these components.
Similar content being viewed by others
References
Gell M, Duhl D N and Giamei A F, The Development of Single Crystal super alloy Turbine Blades, Super alloys, (1980) 205.
Barrows R G and Newkirk J B, A modified system for predicting σ formation, Met. Trans., 3 (1972) 2889.
Wallace W, Prediction of s phase formation in Ni-base superalloys, Metal Sci., (1975) 547.
Ashdown C P and Grey D A, Metal Sci. 13 (1979) 627.
Erickson G L, Polycrystalline Cast Super alloys, Metals hand book, 1, 10th edition, (1989) 981.
Meetham Г W, Metallurgist and Mater. Tech., 9 (1982) 387.
Harris K, Erickson G L and Schwer R W, Mar-M 247 derivations-CM247LC DS alloy and CMSX single crystal alloys: Properties and performance, Super alloys, (1984) 221.
Cetel A D and Duhl D N, 2nd generation columnar grained Nibase super alloy, Super alloys, (1992) 287.
Beeley P R and Driver D, Directionally solidified Gas Turbine Alloys, Metals Forum, 7(3) (1984) 146.
Versnyder F L, High Temperature Alloys for Gas Turbines, London, (1975) 1.
Nathal M V and Ebert L J, Elevated temperature creep-rupture behaviour of the single crystal super alloy NASAIR-100, Metall. Trans., 16A (1985) 427.
Strangman T E, et. al, Super alloy (1980) 215.
Ford D A and Arthey R P, Development of SC alloys, Super alloys, (1984) 115.
Laverant G R and Kear B H, Metall. Trans., I (1970) 491.
Kear B H and Oblack J M, Metal. Trans., 4 (1973) 355.
Shah D M and Duhl D M, The effect of orientation, temperature and γ′ size on the yield strength of a single crystal nickel base super alloy, Super alloys, (1984) 105.
Ross E W, Wukusick C S and King W T, US patent 5,399,313 Nickel base super alloy for producing single crystal articles having improved tolerance to low angle grain boundaries, (1995).
Ross E W and O’Hara K S, Rene N4: A first generation single crystal turbine blade alloy with improved oxidation resistance, low angle boundary strength and superior long time rupture strength, Super alloys, (1996) 19.
Khan T, Caron P and Duret C, The development and characterization of a high performance experimental super alloy, Super alloys, (1984) 145.
Zhongtang W, Zhonyuan W and Chen Dehou, Composition design and experimental study of single crystal alloy DD3, Acta metallurgia Sinica, 23(4) (1987) B171.
Geamei A F and Anton D L, Metall. Trans., 16A (1985) 1997.
Blavette D, Caron P and Khan T, An atom probe study of some fine scale micro-structural feature in nickel base single crystal super alloys, Super alloy, (1988) 305
Cetel A D and Duhl D N, 2nd generation Ni base SC superalloy PWA1484, Super alloy, (1988) 235
Harris K, Erickson G L, Sikkenga S L, Brentnall W D, Aurrecoechea J M, Super alloy, (1992) 297.
US Patent No. 4,935,072 (Garrette).
Fullagar K P L, etal, Aero Engine Test Experience with CMSX-4 Alloy SC Turbine blades, 39th ASME/IGT, The Hague and Trans. ASME Jrn. Eng. Gas turbines and power, April 1996.
Matugi K, Murata Y, Morinaga M and Yukawa N, Realistic Advancement for Nickel-Based Single Crystal Super alloys by the d-electrons Concept, Super alloy, (1992) 307.
Erickson G L, The Development and Application of CMSX10, Super alloy, (1996) 35.
Miller S C, Aero, Industrial & Marine Gas turbines, 3rd Int. Charles Parsons Turbine Conf., UK, (1995) 17.
Thomas Barker, Rolls-Royce Industrial Trent begins rolling, Turbo-machinery International, (1995) 20.
Enomoto M, Harada H and Yamazaki M, CALPHAD, 15 (1991) 255.
Murakami H, Saito Y and Harada H, Super alloy, 1996 (TMS), 249.
Koizumi Y, et.al, Third generation single crystal super alloy with excellent processability and phase stability. Proc. 6th Liege Conf. On Materials for advanced power engineering-1998, Liege, Belgium.
Das N, US patent 5, 925, 198, July 1999, “A third generation single crystal superalloy”.
Balamuralikrishnan R, et.al. Studies on alloying element partitioning in DMS4 Ni-base superalloy using Monte-Carlo simulations and 3-D atom probe, Super Alloy, (2008).
Das N, A third generation columnar grain superalloy, US patent 5, 916, 384, June 1999
Caron P, High γ′-solvus new generation Ni-based super alloy for single crystal turbine blade applications, Super alloy, (2000) 737
Argence D, Vernault C, Desvallees Y and Fournier D, MC-NG: A 4th generation SC super alloy for future aeronautical turbine blades and vanes, Super Alloy, (2000) 829
Sato A, Yeh A C, Kobayashi T, Yokokawa T, Harada H, Murakumo T, Zhang J X, 5th generation Ni based SC superalloy with superior elevated temperature properties, Energy Materials, 2(1) (2007) 19
Erickson G L, The development of the CMSX-11B and CMSX-11C alloys for industrial gas turbine application, Super alloys, (1996) 45
Shah D M and Alan Cetel, Evaluation of PWA1483 for large single crystal IGT blade application, Super alloys, (2000) 295
Kobayashi T, Sato M, Koizumi Y, Harada H, Yamagata T, Tamura A and Fujioka J, Design of a third generation DS super alloy, TMD-103, Proceeding of 6th Liege Conference on Materials for advanced power engineering, (1998) Liege, Belgium.
Kobayashi T, Sato M, Koizumi Y, Harada H, Yamagata T, Tamura A and Fujioka J, Development of a third generation DS super alloy, Super alloys (2000) 323
Hino T, Kobayashi T, Koizumi Y, Harada H and Yamagata T, Development of a new single crystal super alloy for industrial gas turbines, Super alloy, (2000) 729
Das N, US patent No.6446701 B1, Sept 2002 on Apparatus for Unidirectional Solidification of components.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Das, N. Advances in nickel-based cast superalloys. Trans Indian Inst Met 63, 265–274 (2010). https://doi.org/10.1007/s12666-010-0036-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-010-0036-7