Abstract
This paper presents a photovoltaic control system with mixing-mode chip design. The chip includes the photo sensor, amplifier and digital decision core, and driver circuits. The photo-sensor is implemented with the p+/n− well diodes to generate the photo current with the array of diodes. Following, the operational amplifier is used to enhance the signal level, in which the gain is adjustable to control the detected sensitivity from the photo-sensor. Next, the digital controller is designed to keep a stable status for the output level while the twilight slowly changing from dark-to-bright or bright-to-dark. The LED driver is implemented to increase the output current in the last stage. The photo control chip is successfully implemented with TSMC 0.35 μm MOS technology, which the core size is about 928.7 × 807.1 μm.
Similar content being viewed by others
References
Mazer, J. A. (1997). Solar cells: An introduction to crystalline photovoltaic technology (1st ed.). Boston: Kluwer Academic Publishers.
Neville, R. C. (1995). Solar energy conversion: The solar cell (2nd ed.). Amsterdam: Elsevier.
Kauert, R., Budde, R., & Kalz, A. (1995). A monolithic field segment photo sensor system. IEEE Journal of Solid-State Circuit, 30(7), 807–811.
Han, J. H., Jeon, W., & Melngailis, J. (2007, Oct). CMOS Schottky diodes for photo-detector and thermal detector applications. In 5th IEEE conference on sensors, Daegu, Korea (pp. 1493–1496).
Fahrenbruch, A. (2002). Comparison of experimental data with AMPS modeling of the effects of CdS layer thickness on the CdS/CdTe solar cell. In IEEE 29th conference photovoltaic specialists (pp. 583–586).
Pallab, B. (1997). Semiconductor optoelectronic devices. Upper Saddle River: Second Prentice Hall.
Castanler, S. (2002). Modelling photovoltaic systems using PSpice. Chichester: Wiley.
Hiranvarodom, S. (2003, May). A comparative analysis of photovoltaic street lighting systems installed in Thailand. In Proceedings of 3rd world conference on photovoltaic energy conversion, Osaka, Japan (pp. 2478–2481).
Nuttall, D. R., Shuttleworth, R., & Routledge, G. (2008). Design of a LED street lighting system. In IET conference power electronics, machines and drives (pp. 436–440).
Caponetto, R., Dongola, G., Fortuna, L., Riscica, N., & Zufacchi, D. (2008). Power consumption reduction in a remote controlled street lighting system. In IEEE international symposium on power electronics electrical drives, automation and motion (pp. 428–433).
Chung, H. S. H., Ho, N. M., Hui, S. Y. R., & Mai, W. Z. (2005, September). Case study of a highly-reliable dimmable road lighting system with intelligent remote control. In European conference on power electronics and applications, Dresden, France (pp. 11–14).
Godoy Simoes, M., & Franceschetti, N. N. (2000). A RISC-microcontroller based photovoltaic system for illumination applications. In Applied power electronics conference and exposition. LA, USA (pp. 1151–1156).
Becherif, M., Paire, D., & Miraoui, A. (2007, May) Energy management of solar panel and battery system with passive control. In IEEE international conference on clean electrical power (pp. 14–19).
Razavi, B. (2002). Design of analog CMOS integrated circuit. India: Tata McGraw-Hill Education.
Pucknell, D. A., & Eshraghian, K. (2003). Basic VLSI design (3rd ed.). Upper Saddle River: Prentice Hall.
Acknowledgement
This work was supported by the National Science Council, Taiwan, under nsc96-2221-E-327-006-MY3-3.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hsia, SC., Kuo, CK. Photovoltaic lighting control with single chip integration. Analog Integr Circ Sig Process 73, 375–383 (2012). https://doi.org/10.1007/s10470-011-9760-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10470-011-9760-0