Abstract
Additive Manufacturing (AM) is a constructive industrial manufacturing process termed 3D printing. This is a computer-aided design in which three-dimensional objects are fabricated by applying materials layer-by-layers. Various companies, from the medical to aerospace industries, are using AM. Additive manufacturing is beneficial for creating complex or custom parts. This is true whether you are using it for a new application or replacing an older part that is no longer available. In this era of intelligent technology, AM continues to evolve to keep up with today's demands. 3D printing or AM of time-dependent, stimulus-responsive, predetermined, self-calculated materials is referred to as 4D printing. This chapter describes the additive manufacturing of smart materials with a focus on different given stimulus conditions. In this chapter, we have discussed various applications of smart structures in additive manufacturing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Liu R, Wang Z, Sparks T, Liou F, Newkirk J (2017) Aerospace applications of laser additive manufacturing. Laser Addit Manufacturing Woodhead Publ, 351–371
Camacho DD, Clayton P, O’Brien WJ, Seepersad C, Juenger M, Ferron R, Salamone S (2018) Applications of additive manufacturing in the construction industry – a forward-looking review. Autom Constr 89:110–119
Shahrubudin N, Lee TC, Ramlan R (2019) An overview on 3D printing technology: technological, materials, and applications. Procedia Manuf 35:1286–1296
Berman B (2012) 3-D printing: The new industrial revolution. Bus Horiz 55(2):155–162
Khosravani MR, Reinicke T (2020) On the environmental impacts of 3D printing technology. Appl Mater Today 20:100689
Mukhtarkhanov M, Perveen A, Talamona D (2020) Application of stereolithography based 3D printing technology in investment casting. Micromachines. 11:946
Liu Z, Wang Y, Wu B et al (2019) A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts. Int J Adv Manuf Technol 102:2877–2889
Wei C, Li L, Zhang X, Chueh Y (2018) 3D printing of multiple metallic materials via modified selective laser melting. CIRP Ann 67(1):245–248
Peng X, Kuang X, Roach DJ, Wang Y, Hamel CM, Lu C, Qi HJ (2021) Integrating digital light processing with direct ink writing for hybrid 3D printing of functional structures and devices. Addit Manuf 40:101911
Mostafaei A, Elliott AM, Barnes JE, Li F, Tan W, Cramer CL, Nandwana P, Chmielus M (2021) Binder jet 3D printing-Process parameters, materials, properties, modeling, and challenges. Prog Mater Sci 119:100707
Tibbits S (2014) 4D printing: multi-material shape change 84(1), Special issue: high definition: zero tolerance in design and production. 116–121
Shin DG, Kim TH, Kim DE (2017) Review of 4D printing materials and their properties. Int J Precis Eng Manuf-Green Tech 4:349–357
Wang Y, Li X (2021) 4D printing reversible actuator with strain self-sensing function via structural design. Compos B Eng 211:108644
Bahr R, Nauroze A, Su W, Tentzeris MM (2017) Self-actuating 3D printed packaging for deployable antennas. In: 2017 IEEE 67th electronic components and technology conference (ECTC), 1425–1430
Kuang X, Chen K, Dunn CK, Wu J, Li VCF, Qi HJ (2018) 3D Printing of highly stretchable, shape-memory, and self-healing elastomer toward novel 4D printing. ACS Appl Mater Interfaces 10(8):7381–7388
Sun Y (2022) Computational design of self-actuated deformable solids via shape memory material. IEEE Trans Vis Comput Graph 28(7):2577–2588
Zolfagharian A, Kaynak A, Bodaghi M, Kouzani AZ, Gharaie S, Nahavandi S (2020) Control-based 4D printing: adaptive 4D-printed systems. Appl Sci 10:3020
Lee AY, An J, Chua CK, Zhang Y (2019) Preliminary investigation of the reversible 4D printing of a dual-layer component. Engineering 5(6):1159–1170
Mitchell A, Lafont U, Hołyńska M, Semprimoschnig C (2018) Additive manufacturing—a review of 4D printing and future applications. Addit Manuf 24:606–626
Raina A, Haq MIU, Javaid M et al (2021) 4D printing for automotive industry applications. J. Inst. Eng. India Ser. D 102:521–529
Prassler E, Kosuge K (2008) Domestic robotics. In: Siciliano B, Khatib O (eds) Springer handbook of robotics. Springer, Berlin, Heidelberg
Xiong R, Grant AM, Ma R, Zhang S, Tsukruk VV (2018) Naturally-derived biopolymer nanocomposites: Interfacial design, properties and emerging applications. Mater Sci Eng R Rep 125:1–41
Zhang Y, Raza A, Xue Y, Yang G, Hayat U, Yu J, Liu C, Wang H, Wang J (2023) Water-responsive 4D printing based on self-assembly of hydrophobic protein “Zein” for the control of degradation rate and drug release. Bioact Mater 23:343–352
Jeff Plott YJ, Chen R, Wensman J, Shih A (2015) Additive manufacturing of custom orthoses and prostheses-a review. Procedia CIRP 36:199–204
Saboori A, Aversa A, Marchese G, Biamino S, Lombardi M, Fino P (2019) Application of directed energy deposition-based additive manufacturing in repair. Appl Sci 9:3316
Baran A, Polanski M (2018) Microstructure and properties of LENS (laser engineered net shaping) manufactured Ni-Ti shape memory alloy. J Alloy Compd 750:863–870
Zhang D, Li Y, Wang H, Cong W (2020) Laser engineered net shaping in-situ synthesis of NiTi alloy: effects of processing parameters. In: Proceedings of the ASME 2020 15th international manufacturing science and engineering conference. 1: additive manufacturing; advanced materials manufacturing; biomanufacturing; life cycle engineering; manufacturing equipment and automation. Virtual, V001T01A018
Guo M, Gu D, Xi L, Zhang H, Zhang J, Yang J, Wang R (2019) Selective laser melting additive manufacturing of pure tungsten: role of volumetric energy density on densification, microstructure and mechanical properties. Int J Refract Metals Hard Mater 84:105025
Aguilar-Duque JI, Hernández-Arellano JL, Avelar-Sosa L, Amaya-Parra G, Tamayo-Pérez UJ (2019) Additive manufacturing: fused deposition modeling advances. best practices in manufacturing processes. Springer, Cham
Baumgartner S, Gmeiner R, Schönherr JA, Stampfl J (2020) Stereolithography-based additive manufacturing of lithium disilicate glass ceramic for dental applications. Mater Sci Eng: C 116
Choong YYC, Maleksaeedi S, Eng H, Wei J, Su P (2017) 4D printing of high performance shape memory polymer using stereolithography. Mater Des 126:219–225
Palanisamy C, Raman R, Dhanraj Pk (2022) Additive manufacturing: a review on mechanical properties of polyjet and FDM printed parts. Polym Bull 79:7065–7116
Zafar M, Zhao H (2020) 4D printing: future insight in additive manufacturing. Met Mater Int 26:564–585
Farid MI, Wu W, Liu X (2021) Additive manufacturing landscape and materials perspective in 4D printing. Int J Adv Manuf Technol 115:2973–2988
He X, Ding Y, Lei Z, Welch S, Zhang W, Dunn M, Yu K (2021) 3D printing of continuous fiber-reinforced thermoset composites. Addit Manuf 40:101921
Lee AY, An J, Chua CK (2017) Two-way 4D printing: a review on the reversibility of 3D-printed shape memory materials. Engineering 3(5):663–674
Ryan KR, Down MP, Banks CE (2021) Future of additive manufacturing: Overview of 4D and 3D printed smart and advanced materials and their applications. Chem Eng J 403:126162
VanHumbeeck J (2018) Additive Manufacturing of Shape Memory Alloys. Shap. Mem. Superelasticity. 4:309–312
Resnina N, Palani IA, Belyaev S, ManiPrabu SS, Liulchak P, Karaseva U, Manikandan M, Jayachandran S, Bryukhanova V, Sahu A, Bikbaev R (2021) Structure, martensitic transformations and mechanical behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing. J Alloy Compd 851:156851
Akbari S, Sakhaei AH, Panjwani S, Kowsari K, Serjouei A, Ge Q (2019) Multimaterial 3D printed soft actuators powered by shape memory alloy wires. Sens Actuators, A 290:177–189
Arabi-Hashemi A, Maeder X, Figi R, Schreiner C, Griffiths S, Leinenbach C (2020) 3D magnetic patterning in additive manufacturing via site-specific in-situ alloy modification. Appl Mater Today 18:100512
Caputo MP, Berkowitz AE, Armstrong A, Müllner P, Solomon CV (2018) 4D printing of net shape parts made from Ni-Mn-Ga magnetic shape-memory alloys. Addit Manuf 21:579–588
Speirs M, Wang X, Van Baelen S (2016) On the transformation behavior of NiTi shape-memory alloy produced by SLM. Shap Mem Superelasticity 2:310–316
Safaei K, Nematollahi M, Bayati P, Kordizadeh F, Andani MT, Abedi H, Poorganji B, Elahinia M (2022) On the crystallographic texture and torsional behavior of NiTi shape memory alloy processed by laser powder bed fusion: effect of build orientation. Addit Manuf 59:103184
Keshavarzan M, Kadkhodaei M, Forooghi F (2020) An investigation into compressive responses of shape memory polymeric cellular lattice structures fabricated by vat polymerization additive manufacturing. Polym Testing 91:106832
Lin C, Liu L, Liu Y, Leng J (2022) 4D printing of shape memory polybutylene succinate/polylactic acid (PBS/PLA) and its potential applications. Compos Struct 279:114729
Ge Q, Sakhaei A, Lee H (2016) Multimaterial 4D printing with tailorable shape memory polymers. Sci Rep 6:31110
Wang L, Jian Y, Le X, Lu W, Ma C, Zhang J, Huang Y, Huang C, Chen T (2018) Actuating and memorizing bilayer hydrogels for a self-deformed shape memory function. Chem Commun 54:1229–1232
Thetpraphi K, Kanlayakan W, Chaipo S, Moretto G, Kuhn J, Audigier D, Le Quyen M, Cottinet P, Petit L, Capsal J (2021) 3D-printed electroactive polymer force-actuator for large and high precise optical mirror applications. Addit Manuf 47:102199
Joo H, Han H, Cho S (2020) Fabrication of poly(vinyl alcohol)-polyaniline nanofiber/graphene hydrogel for high-performance coin cell supercapacitor. Polymers 12:928
Lai A, Du Z, Gan CL, Schuh CA (2013) Shape memory and superelastic ceramics at small scales. Science 341(6153):1505–1508
Patadiya J, Gawande A, Joshi G, Kandasubramanian B (2021) Additive manufacturing of shape memory polymer composites for futuristic technology. Ind Eng Chem Res 60, 44:15885–15912
Zhang X, Wang Y, Shi X, Jian J, Wang X, Li M, Ji Y, Qian F, Fan J, Wang H, Qiu L, Li W, Yang H (2021) Heteroepitaxy of flexible piezoelectric Pb(Zr0.53Ti0.47)O3 sensor on inorganic mica substrate for lamb wave-based structural health monitoring. Ceram Int 47(9):13156–13163
Kurita H, Lohmuller P, Laheurte P, Nakajima K, Narita F (2022) Additive manufacturing and energy-harvesting performance of honeycomb-structured magnetostrictive Fe52–Co48 alloys. Addit Manuf 54:102741
Ortega N, Kumar A, Scott JF, Katiyar RS (2015) Multifunctional magnetoelectric materials for device applications. J Phys: Condens Matter 27:50
Chen C, Wang X, Wang Y, Yang D, Yao F, Zhang W, Wang B, Sewvandi GA, Yang D, Hu D (2020) Additive manufacturing of piezoelectric materials 30, 52:2005141
Sossou G, Demoly F, Belkebir H, Jerry Qi H, Gomes S, Montavon G (2019) Design for 4D printing: A voxel-based modeling and simulation of smart materials. Mater Des 175:107798
Askari M, Hutchins DA, Thomas PrJ, Astolfi L, Watson RL, Abdi M, Ricci M, Laureti S, Nie L, Freear S, Wildman R, Tuck C, Clarke M, Woods E, Clare AT (2020) Additive manufacturing of metamaterials: a review. Addit Manuf 36:101562(2020)
Li Y, Lin C, Wu Z, Chen Z, Chi C, Cao F (2021) Solution-processed all-ceramic plasmonic metamaterials for efficient solar–thermal conversion over 100–727 °C, 33(1):2005074
Ikram H, Rashid AA, Koç M (2022) Additive manufacturing of smart polymeric composites: literature review and future perspectives 43(9):6355–6380
Wang P, Chang C, Youh M, Liu Y, Chu C, Ger M (2016) The preparation of pH-sensitive Pd catalyst ink for selective electroless deposition of copper on a flexible PET substrate. J Taiwan Inst Chem Eng 60:555–563
Garshasbi S, Santamouris M (2019) Using advanced thermochromic technologies in the built environment: Recent development and potential to decrease the energy consumption and fight urban overheating. Sol Energy Mater Sol Cells 191:21–32
Belka M, Bączek T (2021) Additive manufacturing and related technologies – the source of chemically active materials in separation science. TrAC, Trends Anal Chem 142:116322
Kim MO, Lee JS (2019) The effect of 10,12-pentacosadiynoic acid on the morphology and characteristics of electrospun PDA/PU nanofibers. Fash Text 6:27
Sanumi OJ, Ndungu PG, Oboirien BO (2022) Challenges of 3D printing in LIB electrodes: emphasis on material-design properties, and performance of 3D printed Si-based LIB electrodes. J Power Sources 543:231840
Mondal K, Tripathy PK (2021) Preparation of smart materials by additive manufacturing technologies: a review. Materials 14:6442
Saidi A, Desfontaines L, Champeval A, Lebreux J, Lecomte C, Pruneau M, Grondein A, Izquierdo R, Bélanger D (2017) The effect of ink formulation and electrode geometry design on the electrochemical performance of a printed alkaline battery. Flex Print Electron 2(1):015002
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Behera, A. (2024). Smart Materials Based Additive Manufacturing. In: Rajendrachari, S. (eds) Practical Implementations of Additive Manufacturing Technologies. Materials Horizons: From Nature to Nanomaterials. Springer, Singapore. https://doi.org/10.1007/978-981-99-5949-5_7
Download citation
DOI: https://doi.org/10.1007/978-981-99-5949-5_7
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-5948-8
Online ISBN: 978-981-99-5949-5
eBook Packages: EngineeringEngineering (R0)