Abstract
Additive manufacturing being the most desirable manufacturing process is important to keep a track on how the process affects the physical properties of the material. Additive manufacturing is still in its early stages of research for ceramics and metals. Both ceramics and metals have contrasting properties, for example, while metals are generally highly ductile and thermally conductive, ceramics is mostly brittle and very low in thermal conduction. Additive manufacturing has branched out to different sub-manufacturing processes; the problem however lies that the cost efficiency of setting up the system and churning out the products is still low when it comes to industrial production. A variation of the technology so that it can easily adapt to polymers, metals, and ceramics simultaneously while producing optimal property characteristics for all is required. The paper deals with a comparative study on the effect of additive manufacturing on properties such as flexural strength, tensile strength, compressive strength, hardness, bending strength, and fracture toughness for both metals and ceramics having their characteristics poles apart.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Duda T, Raghavan LV (2016) 3D metal printing technology. IFAC-Pap Online 49:103–110
Zhangwei C, Ziyong L, Junjie L, Chengbo L, Changshi L, Yuelong F, Changyong L, Yang L, Pei W, Yi H (2019) 3D printing of ceramics: a review. J Eur Ceram Soc 39:661–687
Osama A, Al-Ahmari A, Wadea A, Syed HM (2019) Additive manufacturing: challenges, trends, and applications. Adv Mech Eng 11(2):1–27
Madla CM, Trenfield SJ, Goyanes A, Gaisford S, Basit AW (2018) 3D printing technologies, implementation and regulation: an overview. In: Basit A, Gaisford S (eds) 3D Printing of Pharmaceuticals. AAPS Advances in the Pharmaceutical Sciences Series, vol 31. Springer, Cham
Duonga TH, Jaksica NI, DePalmaa JL, Ansaf B, Daniela DM, Armijoa J, Galaviz M (2018) G-code visualization and editing program for inexpensive metal 3D printing. Proc Manuf 17:22–28
Xiaohui J, Ye T, Zhu Y (2019) Effect of process parameters on residual stress in selective laser melting of AlSi10Mg. Mater Sci Technol 36(3):342–352
Matteo S, Rane K, Guillaume H, Tosi A (2019) Determination of process induced dimensional variations of ceramic parts 3D printed by extrusion of a powder-binder feedstock. Proc Manuf 34:560–565
Chen L, He Y, Yang Y, Niu S, Ren H (2017) The research status and development trend of additive manufacturing technology. Int J Adv Manuf Technol 89:3651–3660
Hongjun L, Jia L, Ming CL, Robert L, Huang T (2013) Factors influencing paste extrusion pressure and liquid content of extrudate in freeze-form extrusion fabrication. Int J Adv Manuf Technol 67:899–906
Osama A, Al-Ahmari A, Wadea A, Mian SH (2019) Additive manufacturing: Challenges, trends, and applications. Adv Mech Eng 11(2):1–27
Li W, Lan D, Wang Y (2020) Exploration of direct-ink-write 3D printing in space: droplet dynamics and patterns formation in microgravity. Microgravity Sci Technol 32:935–940
Ferry PWM, Jan F, Dirk WG (2010) A review on stereolithography and its applications in biomedical engineering. Biomaterials 31:6121–6130
Leu MC, Zhang W, Sui G (2000) An experimental and analytical study of ice part fabrication with rapid freeze prototyping. CIRP Annals 49(1):147–150
Seul GK, Song JE, Kim HR (2019) Development of fabrics by digital light processing three-dimensional printing technology and using a polyurethane acrylate photopolymer. Text Res J 1–10
Chandra U, Porwal R (2020) A comprehensive study to select suitable method to enhance mechanical properties during 3D printing of metallic materials. In: E3S Web Conference, vol 184(1–5), p 01031. https://doi.org/10.1051/e3sconf/202018401031
Porwal RK, Chandra U, Misra R (2021) Comprehending and optimising slurry behaviour characteristics of ceramics in additive manufacturing. Adv Mater Proc Technol. https://doi.org/10.1080/2374068X.2021.1948703
Chandra U, Porwal RK (2021) A comprehensive study of the dynamics of density in 3d printed ceramic structures. Mater Today Proc 44(1):336–340
Prashanth KG, Scudino S, Maity T, Das J, Eckert J (2017) Is the energy density a reliable parameter for materials synthesis by selective laser melting. Mater Res Lett 5(6):386–390
Jiang X, Ye T, Zhu Y (2019) Effect of process parameters on residual stress in selective laser melting of AlSi10Mg. Mater Sci Technol 36(3):342–352
Sercombe TB, Li X (2016) Selective laser melting of aluminium and aluminium metal matrix composites: review. Mater Technol 31(2):77–85
Singh S, Sharma VS, Sachdeva A (2015) Progress in selective laser sintering using metallic powders: a review. Mater Sci Technol 32:760–772
Jain PK, Pandey PM, Rao PVM (2008) Experimental investigations for improving part strength in selective laser sintering. Virtual Phys Prototyping 3(3):177–188
Davidson K, Singamneni S (2015) Selective laser melting of duplex stainless steel powders; an investigation. Mater Manuf Process 31(12):1433–1555
Finaa F, Goyanesb A, Gaisforda S, Basit AW (2017) Selective laser sintering (SLS) 3D printing of medicines. Int J Pharm 529:285–293
Bian H, Aoyagi K, Zhao Y, Maeda C, Mouri T, Chiba A (2019) Microstructure refinement for superior ductility of Al–Si alloy by electron beam melting. Addit Manuf 32:100982
Narayanaa PL, Lia CL, Kima SW, Kima SE, Marquardtb A, Leyensb C, Reddyc NS, Yeoma JT, Hong JK (2019) High strength and ductility of electron beam melted β stabilized γ-TiAl alloy at 800°C. Mater Sci Eng A 756:41–45
Chaolin T, Kesong Z, Wenyou M, Liu M (2018) Interfacial characteristic and mechanical performance of maraging steel-copper functional bimetal produced by selective laser melting based hybrid manufacture. Mater Des 115:77–85
Pappas JM, Thakur AR, Dong X (2020) Effects of zirconia doping on additively manufactured alumina ceramics by laser direct deposition. Mater Des 192:1–13
Zhang M, Chen C, Qin L, Yan K, Cheng G, Jing H, Zou T (2017) Laser additive manufacturing of M2 high-speed steel. Mater Sci Technol 34:69–78
Li W, Liu W, Qi F, Chen Y, Xing Z (2019) Determination of micro-mechanical properties of additive manufactured alumina ceramics by nanoindentation and scratching. Ceram Int 45:10612–10618
Fujieda T, Shiratori H, Kuwabara K, Kato T, Yamanaka K, Koizumi Y, Chiba A (2015) First demonstration of promising selective electron beam melting method for utilizing High-entropy alloys as engineering materials. Mater Lett 159:12–15
Lakhdar Y, Tuck C, Binner J, Terry A, Goodridge R (2020) Additive manufacturing of advanced ceramic materials. Prog Mater Sci 116:1–62
Deirminaa F, Peghinia N, AlMangourc B, Grzesiakd D, Pellizzaria M (2019) Heat treatment and properties of a hot work tool steel fabricated by additive manufacturing. Mater Sci Eng A 753:109–121
Lakhdar Y, Tuck C, Binner J, Terry A, Goodridge R (2020) Additive manufacturing of advanced ceramic materials. Prog Mater Sci 116:2–62
Bian H, Aoyagi K, Zhao Y, Maeda C, Mouri T, Chiba A (2019) Microstructure refinement for superior ductility of Al–Si alloy by electron beam melting. Addit Manuf 32:1–12
Xuesong L, Yoonjae L, Shoufeng Y, Yang H, Rick U, Julian RGE, Clive GP (2008) Fabrication of electromagnetic crystals by extrusion free forming. Metamaterials 2:36–44
Raju R, Selvakumar TA, Ali PMR, Kumar PS, Giridhar D (2020) Experimentation and process parametric optimization of 3d printing of abs-based polymer parts. In: Advances in industrial automation and smart manufacturing (Lecture Notes in Mechanical Engineering), Springer, pp 487–496
Raju R, Manikandan N, Binoj JS, Palanisamy D, Arulkirubakaran D, Thejasree P, Kalyan AP, Reddy GS (2020) Optimization and performance evaluation of PLA polymer material in situ carbon particles on structural properties. Mater Today Proc 39(1):223–229
Todd M, Long MJ (2016) Mechanical behavior of additive manufactured, powder-bed laser-fused materials. Mater Sci Eng A. 651:198–213
Josten A, Höfemann M (2020) Arc-welding based additive manufacturing for body reinforcement in automotive engineering. Weld World 64:1449–1458
Dewidar MM, Dalgarno KW, Wright CS (2003) Processing conditions and mechanical properties of high-speed steel parts fabricated using direct selective laser sintering. Proc Instn Mech Eng Part B J Eng Manuf 217:1651–1663
Yu T, Zhang Z, Liu Q, Kuliiev R, Orlovskaya N, Wu D (2019) Extrusion-based additive manufacturing of yttria-partially-stabilized zirconia ceramics. Ceram Int 46(4):5020–5027
Feilden E, Glymond D, Saiz E, Vandeperre L (2019) High temperature strength of an ultra high temperature ceramic produced by additive manufacturing. Ceram Int 45:18310–18214
Xing H, Zou B, Li S, Fu X (2017) Study on surface quality, precision and mechanical properties of 3D printed ZrO2 ceramic components by laser scanning stereolithography. Ceram Int 43(18):16340–16347
Li HX, Qi HL, Song CH, YL Li, Yan M (2017) Selective laser melting of P20 mould steel: investigation on the resultant microstructure, high-temperature hardness and corrosion resistance. Powder Metall 61:21–27
Zhao X, Wei Q, Song B, Liu Y, Luo X, Wen S, Shi Y (2015) Fabrication and characterization of AISI 420 stainless steel using selective laser melting. Mater Manuf Process 30:1283–1289
Li P, Gong Y, Xu Y, Qi Y, Sun Y, Zhang H (2019) Inconel-steel functionally bimetal materials by hybrid directed energy deposition and thermal milling: microstructure and mechanical properties. Arch Civil Mech Eng 19:820–831
Pelleg J (2020) Chapter three-testing: comparison of AM data with traditionally fabricated. In: Additive and traditionally manufactured components, pp 49–176
Wang X, Zhou J, Yang W, Pang J, Zhang W, Chen G, Dong X, Zheng Z, Lin W, Feng W, Zhou G, Zhu W, Yang F (2020) Warpage optimization and influence factors analysis of 3D printing personalized JJY tablets, drug development and industrial pharmacy. Drug Develop Indus Pharm 46(3):388–394
Fayazfar H, Liravi F, Ali U et al (2020) Additive manufacturing of high loading concentration zirconia using high-speed drop-on-demand material jetting. Int J Adv Manuf Technol 109:2733–2746
Buchanana C, Matilainenb V-P, Salminenb A, Gardnera L (2017) Structural performance of additive manufactured metallic material and cross-sections. J Constr Steel Res 136:35–48
Cyra E, Lloydb A, Mohammadia M (2018) Tension-compression asymmetry of additively manufactured maraging steel. J Manuf Process 35:289–294
Youn S-J, Kim Y-K, Kim S-W, Lee K-A (2020) Elevated temperature compressive deformation behaviors of γ-TiAl-based Ti–48Al–2Cr–2Nb alloy additively manufactured by electron beam melting. Intermetallics 124:1–11
Wanga X, Schmidta F, Hanaora D, Kammb PH, Lic S, Gurlo A (2019) Additive manufacturing of ceramics from preceramic polymers: A versatile stereolithographic approach assisted by thiol-ene click chemistry. Addit Manuf 27:80–90
Yongxia Y, Wei Q, Bohang X, Na S, Ting J, Zhe Z (2021) High performance hydroxyapatite ceramics and a triply periodic minimum surface structure fabricated by digital light processing 3D printing. J Adv Ceram 10(1):39–48
Jin G, Yong Z, Peiran L, Jimin C (2019) Fine lattice structural titanium dioxide ceramic produced by DLP 3D printing. Ceram Int 45:23007–23012
Liua F, Linb X, Shic J, Zhangd Y, Biand P, Lib X, Hub Y (2019) Effect of microstructure on the charpy impact properties of directed energy deposition 300M steel. Addit Manuf 29:1–10
Cain V, Thijs L, Van Humbeeck J, Van Hooreweder B, Knutsen R (2015) Crack propagation and fracture toughness of Ti6Al4V alloy produced by selective laser melting 5:68–75
Pellizzaria M, AlMangourb B, Benedettia M, Furlania S, Grzesiakc D, Deirmina F (2020) Effects of building direction and defect sensitivity on the fatigue behavior of additively manufactured H13 tool steel. Theoret Appl Fract Mech 108:1–10
Pelleg J (2020) Chapter three-testing: comparison of AM data with traditionally fabricated, In: Additive and traditionally manufactured components 49–176
Xing H, Zou B, Liu X, Wang X, Chen Q, Fu X, Li Y (2019) Effect of particle size distribution on the preparation of ZTA ceramic paste applying for stereolithography 3D printing. Powder Technol 359:314–322
Sercombe TB, Li X (2016) Selective laser melting of aluminium and aluminium metal matrix composites: review. Mater Technol 31(2):77–85
Bajaj P, Hariharan A, Kini A, Kürnsteiner P, Raabe D, Jägle EA (2019) Steels in additive manufacturing: a review of their microstructure and properties. Mater Sci Eng A 772:1–38
Turk C, Zunko H, Aumayr C et al (2019) Advances in maraging steels for additive manufacturing. Berg Huettenmaenn Monatsh 164:112–116
Jens B, Schroer A, Schwaiger R, Christian Lange IT, Valdevit L, Kraft O (2015) Push-to-pull tensile testing of ultra-strong nanoscale ceramic–polymer composites made by additive manufacturing. Extreme Mech Lett 3:105–112
Raquel G, Celio G, Figueiredo P, Ana PS (2019) Additive manufacturing of ceramics for dental applications: a review. Dental Mater 35:825–846
Schlachera J, Lubea T, Harrera W, Mitteramskoglerb G, Schwentenweinb M, Danzera R, Bermejo R (2020) Strength of additive manufactured alumina. J Eur Ceram Soc 40:4737–4745
Rosenthal S et al (2019) Proc Manuf 34:475–481
Papke T et al (2020) Proc CIRP 94:35–40
Papke T et al (2018) Proc CIRP 74:290–294
Silva CMA, Bragança IMF, Cabrita A et al (2017) Formability of a wire arc deposited aluminium alloy. J Braz Soc Mech Sci Eng 39:4059–4068
Shuangjun H, Chunsheng Y, Huoping Z, Zitian F (2019) Additive manufacturing of thin alumina ceramic cores using binder-jetting. Addit Manuf 29:1–7
Sonja B, Robert G, Julia AS, Jürgen S (2019) Stereolithography-based additive manufacturing of lithium disilicate glass ceramic for dental applications. Mater Sci Eng C 116:1–10
Lu Y, Mei Z, Zhang J, Gao S, Yang X, Dong B, Li Y, Yu H (2020) Flexural strength and weibull analysis of Y-TZP fabricated by stereolithographic additive manufacturing and subtractive manufacturing. J Eur Ceram Soc 40:826–834
Harrer W, Schwentenweinb M, Lubea T, Danzer R (2017) Fractography of zirconia-specimens made using additive manufacturing (LCM) technology. J Eur Ceram Soc 37:4331–4338
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Chandra, U., Porwal, R.K., Mishra, S., Bhuyan, B.K. (2023). Theoretical Comparison of Properties and Their Characteristics Features for Additive Manufactured Metal and Ceramic Structures. In: Arockiarajan, A., Duraiselvam, M., Raju, R., Reddy, N.S., Satyanarayana, K. (eds) Recent Advances in Materials Processing and Characterization. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-19-5347-7_9
Download citation
DOI: https://doi.org/10.1007/978-981-19-5347-7_9
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-5346-0
Online ISBN: 978-981-19-5347-7
eBook Packages: EngineeringEngineering (R0)