Abstract
In the preceding two chapters, various effects on steady shear viscous and elastic properties of filled polymer systems were discussed. The present chapter focuses on the unsteady shear viscoelastic properties of these systems. The unsteady shear characteristics are mainly discussed with respect to small-amplitude oscillations, namely, dynamic rheological data. In some cases, the thixotropic sweep responses and the stress relaxation behavior are also included because they bring out the rheological characteristics in some situations in a much better manner. The extensive literature [1–85] on the rheology of filled polymer systems, however, contains quite limited information on the unsteady shear data [1,8,43–45,54,61,62,64,68,71,72,74,91,92].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Aral, B.K. and Kalyon, D.M. (1997) Viscoelastic behavior of filled polymers, Paper 5-A presented at the 13th international meeting of the Polymer Processing Society (June 10–13).
Chapman, F.M. and Lee, T.S. (1970) Effect of talc filler on the melt rheology of polypropylene, SPE Journal, 26, 37–40.
Mills, N.J. (1971) The rheology of filled polymers, J. Appl. Polym. Sci. 15, 2791–805.
Nazem, F. and Hill, C.T. (1974) Elongational and shear viscosities of beadfilled thermoplastic, Trans. Soc. Rheol., 18, 87–101.
Han, C.D. (1974) Rheological properties of calcium carbonate-filled polypropylene melts., J. Appl. Polym. Sci., 18, 821–9.
White, J.L. and Crowder, J.W. (1974) The influence of carbon black on the extrusion characteristics and rheological properties of elastomers: polybutadiene and butadiene-styrene copolymer, J. Appl. Polym. Sci., 18, 1013–38.
Minagawa, N. and White, J.L. (1976) The influence of titanium dioxide on the rheological extrusion properties of polymer melts, J. Appl. Polym. Sci., 20, 501–23.
Faulkner, D.L. and Schmidt, L.R. (1977) Glass bead-filled polypropylene Part I: Rheological and mechanical properties, Polym. Engg Sci., 17, 657–64.
Boira, M.S. and Chaffey, C.E. (1977) Effects of coupling agents on the mechanical and rheological properties of mica-reinforced polypropylene, Polym. Engg Sci.,17, 715–18.
Bigg, D.M. (1977) Rheology and wire coating of high atomic number metal low density polyethylene composites, Polym. Engg Sci., 17, 745–50.
Kataoka, T., Kitano, T., Sasahara, M. and Nishijima, K. (1978) Viscosity of particle filled polymer melts, Rheol. Acta, 17, 149–55.
Kataoka, T., Kitano, T. and Nishimura, T. (1978) Utility of parallel-plate plastometer for rheological study of filled polymer melts, Rheol. Acta, 17, 626–31.
Copeland, J.R. and Rush, O.W. (1978) Wollastonite: short fiber filler/ reinforcement, Plastic Compounding, 1, 26–36 (Nov/Dec).
Chan, Y., White, J.L. and Oyanagi, Y. (1978) Influence of glass fibers on the extrusion and injection molding characteristics of polyethylene and polystyrene melts, Polym. Engg Sci., 18, 268–72;
Chan, Y., White, J.L. and Oyanagi, Y. (1978) A fundamental study of the rheological properties of glass fiber-reinforced polyethylene and polystyrene melts, J. Rheol., 22, 507–24.
Han, C.D., Sandford, C. and Yoo, H.J. (1978) Effects of titanate coupling agents on the rheological and mechanical properties of filled polyolefins, Polym. Engg Sci., 18, 849–54.
Menges, G., Geisbusch, P. and Zingel, U. (1979) Kunststoffe, 7, 485.
Arina, M., Honkanen, A. and Tammela, V. (1979) Mineral fillers in low density polyethylene films, Polym. Engg Sci., 19, 30–9.
Monte, S.J. and Sugerman, G. (1979) A new generation of age and waterresistant reinforced plastics, Polym. Plastics Tech. Engg, 12, 115–35.
Lobe, V.M. and White, J.L. (1979) An experimental study of the influence of carbon black on the rheological properties of a polystyrene melt, Polym. Engg Sci., 19, 617–24.
Wu, S. (1979) Order-disorder transitions in the extrusion of fiber-filled poly(ethylene terephthalate) and blends, Polym. Engg Sci.,19, 638–50.
Kataoka, T., Kitano, T., Oyanagi, Y. and Sasahara, M. (1979) Viscous properties of calcium carbonate filled polymer melts, Rheol. Acta, 18, 635–9.
Kitano, T., Kataoka, T., Nishimura, T. and Sakai, T. (1980) Relative viscosities of polymer melts filled with inorganic fillers, Rheol. Acta, 19, 764–9.
Kitano, T., Nishimura, T., Kataoka, T. and Sakai, T. (1980) Correlation of dynamic and steady flow viscosities of filled polymer systems, Rheol. Acta, 19, 671–3.
Crowson, R.J., Folkes, M.J. and Bright, P.F. (1980) Rheology of short glass fiber-reinforced thermoplastics and its applications to injection molding I. Fiber motion and viscosity measurement, Polym. Engg Sci., 20, 925–33.
Crowson, R.J. and Folkes, M.J. (1980) Rheology of short glass fiberreinforced thermoplastics and its application to injection molding II. The effect of material parameters, Polym. Engg Sci., 20, 934–40.
Goel, D.C. (1980) Effect of polymeric additives on the rheological properties of talc-filled polypropylene, Polym. Engg Sci., 20, 198–201.
Tanaka, H. and White, J.L. (1980) Experimental investigations of shear and elongational flow properties of polystyrene melts reinforced with calcium carbonate, titanium dioxide and carbon black, Polym. Engg Sci., 20, 949–56.
Czarnecki, I. and White, J.L. (1980) Shear flow rheological properties, fiber damage and mastication characteristics of aramid, glass and cellulose-fiber reinforced polystyrene melts, J. Appl. Polym. Sci., 25, 1217–44.
White, J.L., Czarnecki, I. and Tanaka, H. (1980) Experimental studies of the influence of particle and fiber reinforcement on the rheological properties of polymer melts, Rubber Chem. Tech., 53, 823–35.
Hancock, M., Tremayne, P. and Rosevear, J. (1980) Fillers in polypropylene II. J. Polym. Sci. (Polym. Chem. Edn), 18, 3211–17.
Knutsson, B.A., White, J.L. and Abbas, K.A. (1981) Rheological and extrusion characteristics of glass-fiber reinforced polycarbonate, J. Appl. Polym. Sci., 26, 2347–62.
Cope, D.E. and Linnert, E. (1980) The lowdown on loading down resins using hydrophobic encapsulation, Plastic Engg, 37–9 (June).
Kitano, T., Kataoka, T. and Shirata, T. (1980) An empirical equation of the relative viscosity of polymer melts filled with various inorganic fillers, Rheol. Acta, 20, 207–9.
Han, C.D., Van der Weghe, T., Shete, P. and Haw, J.R. (1981) Effect of coupling agents on the rheological properties, processing and mechanical properties of filled polypropylene, Polym. Engg Sci., 21, 196–204.
Stamhuis, J.F. and Loppe, J.P.A. (1982) Rheological determination of polymer-filler affinity, Rheol. Acta, 21, 103–5.
Sharma, Y.N., Patel, R.D., Dhimmar, I.H. and Bhardwaj, I.S. (1982) Studies of the effect of titanate coupling agent on the performance of polypropylene-calcium carbonate composite, J. Appl. Polym. Sci., 27, 97–104.
Nakatsuka, T., Kawasaki, H., Itadani, K. and Yamashita, S. (1982) Phosphate coupling agents for calcium carbonate filler, J. Appl. Polym. Sci., 27, 259–69.
Lee, W.M., Abe, D.A., Chipalkatti, M.H. and Liaw, T.F. (1982) Rheological properties of particulate-filled linear low density polyethylenes, Proc. Ann. Conf. Reinf. Plast. Compos. Inst. Soc., Plast. Ind., 37 (12D), 7.
Juskey, V.P. and Chaffey, C.E. (1982) Rheology and tensile properties of polypropylene reinforced with glycerol-treated mica, Can. J. Chem. Engg, 60, 334–41.
Hinkelmann, B. (1982) Zur analytischen beschreibung des fullstoff-einflusses auf das fliessverhalten von kunststoffschmelzen, Rheol. Acta, 21, 491–3.
Utracki, L.A. and Fisa, B. (1982) Rheology of fiber or flake-filled plastics, Polym. Composites, 3, 193–211.
White, J.L. (1982) Rheological behavior of highly filled/reinforced polymer melts, Plastics Compounding, 47–64 (Jan/Feb).
Bigg, D.M. (1982) Rheological analysis of highly loaded polymeric composites filled with non-agglomerating spherical filler particles, Polym. Engg Sci., 22, 512–18.
Bigg, D.M. (1983) Rheological behavior of highly filled polymer melts, Polym. Engg Sci., 23, 206–10.
Althouse, L.M., Bigg, D.M. and Wong, W.M. (1983) Evaluating the effectiveness of filler surface treatments, Plastics Compounding, (March/April).
Lem, K.W. and Han, C.D. (1983) Rheological behavior of concentrated suspensions of particulates in unsaturated polyester resin, J. Rheol., 27, 263–88.
Daley, L.R. and Rodriguez, F. (1983) Flow properties of ethylene-propylene terpolymer filled with silica modified by silane coupling agents, Ind. Eng. Chem. Prod. Res. Dev., 22, 695–8.
Mutsuddy, B.C. (1983) Influence of powder characteristics on the rheology of ceramic injection molding mixtures, Proc. Brit. Ceram. Soc., 33, 117–37.
Chaffey, C.E. (1983) Reinforced thermoplastics: through flow to use, Ann. Rev. Mater. Sci., 13, 43–65.
Shenoy, A.V., Saini, D.R. and Nadkarni, V.M. (1983) Rheograms of filled polymer melts from melt-flow index, Polym. Composites, 4, 53–63.
Shenoy, A.V. and Saini, D.R. (1983) Interpretation of flow data for multicomponent polymeric systems, Colloid Polym. Sci., 261, 846–54.
Suetsugu, Y. and White, J.L. (1983) The influence of particle size and surface coating of calcium carbonate on the rheological properties of its suspension in molten polystyrene, J. Appl. Polym. Sci., 28, 1481–501.
Luo, H.L., Han, C.D. and Mijovic, J. (1983) Effects of coupling agents in the rheological behavior and physical mechanical properties of filled nylon 6, J. Appl. Polym. Sci., 28, 3387–98.
Bigg, D.M. (1984) Complex rheology of highly filled thermoplastic melts, Proc. IX Intl. Congress on Rheology in Mexico, Adv. in Rheology, 3, 429–37.
Kitano, T., Kataoka, T. and Nagatsuka, Y. (1984) Shear flow rheological properties of vinylon and glass-fiber reinforced polyethylene melts, Rheol. Acta, 23, 20–30.
Kitano, T., Kataoka, T. and Nagatsuka, Y. (1984) Dynamic flow properties of vinylon fiber and glass fiber reinforced polyethylene melts, Rheol. Acta, 23, 408–16.
Suetsugu, Y. and White, J.L. (1984) A theory of thixotropic plastic viscoelastic fluids with a time-dependent yield surface and its comparison to transient and steady state experiments on small particle filled polymer melts, J. Non-Newtonian Fluid Mech., 14, 121–40.
Hinkelmann, B. and Mennig, G. (1985) On the rheological behavior of filled polymer melts, Chem. Engg Comm., 36, 211–21.
Bretas, R.E.S. and Powell, R.L. (1985) Dynamic and transient rheological properties of glass-filled polymer melts, Rheol. Acta, 24, 69–74.
Saini, D.R., Shenoy, A.V. and Nadkarni, V.M. (1985) Effect of surface treatment on the rheological and mechanical properties of ferrite-filled polymeric systems, Polym. Engg Sci., 25, 807–11.
Saini, D.R. and Shenoy, A.V. (1986) Viscoelastic properties of highly loaded ferrite-filled polymeric systems, Polym. Engg Sci., 26, 441–5.
Shenoy, A.V. and Saini, D.R. (1986) Quantitative estimation of matrix filler interactions in ferrite-filled styrene-isoprene-styrene block copolymer systems, Polym. Composites, 7, 96–100.
Saini, D.R., Shenoy, A.V. and Nadkarni, V.M. (1986) Melt rheology of highly loaded ferrite-filled polymer composites, Polym. Composites, 7, 193–200.
Shenoy, A.V. and Saini, D.R. (1986) Wollastonite reinforced polypropylene composites: Dynamic and steady state melt flow behavior, J. Reinf. Plastics Comp., 5, 62–73.
Mutel, A.T. and Kamal, M.R. (1986) Characterization of the rheological behavior of fiber-filled polypropylene melts under steady and oscillatory shear using cone-and-plate and rotational parallel plate geometry, Polym. Composites, 7, 283–94.
Edirisinghe, M.J. and Evans, J.R.G. (1987) Rheology of ceramic injection molding formulations, Br. Ceram. Trans. J., 86, 18–22.
Sacks, M.D., Khadilkar, C.S., Scheiffele, G.W., Shenoy, A.V., Dow, J.H. and Sheu, R.S. (1987) Dispersion and rheology in ceramic processing, Adv. in Ceramics, 24, 495–515.
Dow, J.H., Sacks, M.D. and Shenoy, A.V. (1988) Dispersion of ceramic particles in polymer melts, Ceram. Trans. (Ceram. Powder Sci. IIA), 1, 380–8.
Hunt, K.N., Evans, J.R.G. and Woodthorpe, J. (1988) The influence of mixing route on the properties of ceramic injection moulding blends, Br. Ceram. Trans. J.,17–21.
Takahashi, M., Suzuki, S., Nitanda, H. and Arai, E. (1988) Mixing and flow characteristic in the alumina/thermoplastic resin system, J. Am. Ceram. Soc., 17, 1093–99.
Poslinski, A.J., Ryan, M.E., Gupta, R.K., Seshadri, S.G. and Frechette, F.J. (1988) Rheological behavior of filled polymer systems I. Yield stress and shear-thinning effects, J. Rheol., 32, 703–35.
Poslinski, A.J., Ryan, M.E., Gupta, R.K., Seshadri, S.G. and Frechette, F.J. (1988) Rheological behavior of filled polymeric systems II. The effect of a bimodel size distribution of particulates, J. Rheol., 32, 751–71.
Ishigure, Y., Nagaya, K., Mitsumatsu, F., Otabe, S., Hayashi, K., Sobajima, A. and Murase, I. (1989) Relationship between the flow characteristics of highly filled alumina or zirconia-organic binder and the properties of sintered products in injection molding processing, Rep. Gifu Pref. Ind. Res. Tech. Center, 21, 51–70.
Dow, J.H., Sacks, M.D. and Shenoy, A.V. (1990) Dispersion of alumina particles in polyethylene melts, Ceram. Trans. (Ceram. Powder Sci. III), 12, 431–42.
Edirisinghe, M.J., Shaw, H.M. and Tomkins, K.L. (1992) Flow behavior of ceramic injection moulding suspensions, Ceramics Int., 18,193–200.
Nielsen, L.E. (1974) Mechanical Properties of Polymers and Composites, Marcel Dekker, New York, Vol. 2, Ch. 7, 379–86.
Han, C.D. (1976) Rheology in Polymer Processing, Academic Press, New York, 7, 182–8.
Nielsen, L.E. (1977) Polymer Rheology, Marcel Dekker, New York, Ch. 9, 133–57.
Paul, D.R. and Newman, S. (1978) Polymer Blends, Academic Press, New York, 1, Ch. 7, 295–352.
Vinogradov, G.V. and Malkin, A.Y. (1980) Rheology of Polymers, Mir Publishers, Moscow 380–402.
Han, C.D. (1981) Multiphase Flow in Polymer Processing, Academic Press, New York.
Shenoy, A.V. (1988) Rheology of highly filled polymer melt systems, in Encyclopedia of Fluid Mechanics, (ed. N.P. Cheremisinoff), Gulf Publishing, Houston, TX, 7, 667–701.
Yanovsky, Yu.G. and Zaikov, G.E. (1990) Rheological properties of filled polymers, in Encyclopedia of Fluid Mechanics, (ed. N.P. Cheremisinoff), Gulf Publishing, Houston, TX, 9, 243–76.
Carreau, P.J. (1992) Rheology of filled polymeric systems, in Transport Processes in Bubbles, Drops and Particles (eds R.P. Chhabra and D. Dekee), Hemisphere Publishing, New York, 165–90.
Advani, S.G. (ed.) (1994) Flow and Rheology in Polymer Composites Manufacturing, Elsevier Science BV.
Carreau, P.J. (1972) Rheological equations from molecular network theories, Trans. Soc. Rheol., 16, 99–127.
Wagner, M.H. (1976) Analysis of time-dependent non-linear stress-growth data for shear and elongational flow of a low-density branched polyethylene melt, Rheol. Acta, 15, 136–42.
Wagner, M.H. (1977) Prediction of primary stress difference from shear viscosity data using a single integral constitutive equation, Rheol. Acta, 16, 43–50.
Chong, J.S., Christiansen, E.B. and Baer, A.D. (1971) Rheology of concentrated suspensions, J. Appl. Polym. Sci., 15, 2007–21.
Allen, T. (1981) Particle Size Measurement, Chapman & Hall, London.
Kalyon, D. (1988) Mixing in continuous processors, in Encyclopedia of Fluid Mechanics, (ed. N.P. Cheremisinoff), Gulf Publishing, Houston, TX, 7, 887–926.
Dow, J.H. (1992) PhD Thesis, University of Florida, Gainesville.
Ziegel, K.D. (1969) Role of the interface in mechanical energy dissipation of composites, J. Colloid Interf. Sci., 29, 72–80.
Saini, D.R., Shenoy, A.V. and Nadkarni, V.M. (1984) Dynamic mechanical properties of highly loaded ferrite filled thermoplastic elastomer, J. Appl. Polym. Sci., 29, 4123–43.
Ziegel, K.D. and Romanov, A. (1973) Modulus reinforcement in elastomer composites. I. Inorganic fillers, J. Appl. Polym. Sci., 17, 1119–31.
Bigg, D.B. (1984) Interrelation among feedstock form, product requirement, equipment type, and operating parameters in polymer mixing processes, Polym. Plast. Technol. Eng., 23, 133–68.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Shenoy, A.V. (1999). Unsteady shear viscoelastic properties. In: Rheology of Filled Polymer Systems. Springer, Dordrecht. https://doi.org/10.1007/978-94-015-9213-0_8
Download citation
DOI: https://doi.org/10.1007/978-94-015-9213-0_8
Publisher Name: Springer, Dordrecht
Print ISBN: 978-90-481-4029-9
Online ISBN: 978-94-015-9213-0
eBook Packages: Springer Book Archive