Summary
Based on Maron-Pierce's equation, an empirical equation was suggested, which relates the relative viscosity (η r ) of the polymer melt filled with various inorganic filler, such as glass fiber, carbon fiber, talc, precipitated- and natural-calcium carbonate powder, and glassy small sphere, to the volume fraction (φ) of the filler. The equation isη r = (1 −φ/A)−2, whereA is a parameter relating to the packing geometry of the filler, which is similar to the parameterφ 0 in Maron-Pierce's equation. In the equationη r is defined as the ratio of the viscosity of the filledsystem to that of the medium at the same shear stress not the shear rate. The applicability of the equation is above the shear stress about 104 dyne/cm2. The equation has a simple form and is considered to have a practical utility for filled-polymer melt systems.
References
Maron, S. H., P. E. Pierce, J. Colloid Sci.11, 80 (1956).
Cross, M. M., Rheol. Acta14, 402 (1975).
Kataoka, T., T. Kitano, M. Sasahara, K. Nishijima, Rheol. Acta17, 149 (1978).
Kitano, T., T. Kataoka, T. Nishimura, T. Sakai, Rheol. Acta19, 764 (1980).
Kataoka, T., T. Kitano, Y. Oyanagi, M. Sasahara, Rheol. Acta18, 635 (1979).
Kitano, T., T. Kataoka, Rheol. Acta19, 753 (1980).
Ziegel, K. D., J. Colloid & Interface Sci.34, 185 (1974).
Brodnyan, J., Trans. Soc. Rheol.3, 61 (1959).
Author information
Authors and Affiliations
Additional information
With 2 figures and 1 table
Rights and permissions
About this article
Cite this article
Kitano, T., Kataoka, T. & Shirota, T. An empirical equation of the relative viscosity of polymer melts filled with various inorganic fillers. Rheol Acta 20, 207–209 (1981). https://doi.org/10.1007/BF01513064
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01513064