Abstract
Many food products which are consumed on a regular basis, can be categorized as complex colloidal systems that are created by close contact of dispersed and continuous phases. Foams are one such colloidal systems where dispersed air bubbles are incorporated and stabilized in a continuous phase. In principle, foams can be stabilized by use of either low molecular weight surfactants, amphiphilic polymers or surface-active rigid or soft particles. In food products, foams have traditionally being stabilized by biopolymers such as proteins and certain polysaccharides but lately, there has been a tremendous interest in improving the foaming functionality of biopolymers either through physical or chemical modifications and utilizing polymer-based colloidal particles for foam stabilization. The recent understanding and advances in this highly active area of foam stabilization are reviewed in this chapter with the help of illustrative examples.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Acharya DP et al (2005) Interfacial properties and foam stability effect of novel gemini-type surfactants in aqueous solutions. J Colloid Interface Sci 291(1):236–243 Available at: http://www.sciencedirect.com/science/article/pii/S0021979705004996
Amagliani L, Schmitt C (2017) Globular plant protein aggregates for stabilization of food foams and emulsions. Trends Food Sci Technol 67(Supplement C):248–259 Available at http://www.sciencedirect.com/science/article/pii/S0924224417302649
Bergeron V, Walstra P (2005) Foams. Fundamentals of interface and colloid science, 5(C), pp 1–38. Available at http://www.sciencedirect.com/science/article/pii/S187456790580011X. Accessed 11 Oct 2017
Binks BP et al (2005) Naturally occurring spore particles at planar fluid interfaces and in emulsions. Langmuir 21(18):8161–8167. https://doi.org/10.1021/la0513858
Campbell AL et al (2008) Scalable fabrication of anisotropic micro-rods from food-grade materials using an in shear flow dispersion-solvent attrition technique. J Mater Chem 18(34):4074–4078. https://doi.org/10.1039/B807738J
Campbell AL, Stoyanov SD, Paunov VN (2009) Fabrication of functional anisotropic food-grade micro-rods with micro-particle inclusions with potential application for enhanced stability of food foams. Soft Matter 5(5):1019–1023. https://doi.org/10.1039/B812706A
Cervantes Martinez A et al (2008) On the origin of the remarkable stability of aqueous foams stabilised by nanoparticles: link with microscopic surface properties. Soft Matter 4(7):1531–1535. https://doi.org/10.1039/B804177F
Cervin NT et al (2013) Lightweight and strong cellulose materials made from aqueous foams stabilized by nanofibrillated cellulose. Biomacromolecules 14(2):503–511. https://doi.org/10.1021/bm301755u
Cervin NT et al (2015) Mechanisms behind the stabilizing action of cellulose nanofibrils in wet-stable cellulose foams. Biomacromolecules 16(3):822–831. https://doi.org/10.1021/bm5017173
Cumper CWN (1953) The stabilization of foams by proteins. Trans Faraday Soc 49(0):1360–1369. https://doi.org/10.1039/TF9534901360
Damodaran S (2005) Protein stabilization of emulsions and foams. J Food Sci 70(3):R54–R66. https://doi.org/10.1111/j.1365-2621.2005.tb07150.x
Davis JP, Foegeding EA (2004) Foaming and interfacial properties of polymerized whey protein isolate. J Food Sci 69(5):C404–C410. https://doi.org/10.1111/j.1365-2621.2004.tb10706.x
Dickinson E (2010) Food emulsions and foams: stabilization by particles. Curr Opin Colloid Interface Sci 15(1):40–49 http://www.sciencedirect.com/science/article/pii/S1359029409001010
Du Z et al (2003) Outstanding stability of particle-stabilized bubbles. Langmuir 19(8):3106–3108. https://doi.org/10.1021/la034042n
Fameau A-L (2018) Non-aqueous foams based on edible oils. In: Edible oil structuring: concepts, methods and applications. The Royal Society of Chemistry, London, pp 275–307. https://doi.org/10.1039/9781788010184-00275
Green AJ et al (2013) Formation and stability of food foams and aerated emulsions: hydrophobins as novel functional ingredients. Curr Opin Colloid Interface Sci 18(4):292–301 http://www.sciencedirect.com/science/article/pii/S1359029413000563
Hu Z et al (2016) Stable aqueous foams from cellulose nanocrystals and methyl cellulose. Biomacromolecules 17(12):4095–4099. https://doi.org/10.1021/acs.biomac.6b01641
Jin H et al (2012) Super stable foams stabilized by colloidal ethyl cellulose particles. Soft Matter 8(7):2194–2205. https://doi.org/10.1039/C1SM06518A
Kim S, Barraza H, Velev OD (2009) Intense and selective coloration of foams stabilized with functionalized particles. J Mater Chem 19(38):7043–7049. https://doi.org/10.1039/B908054F
Lam S, Velikov KP, Velev OD (2014) Pickering stabilization of foams and emulsions with particles of biological origin. Curr Opin Colloid Interface Sci 19(5):490–500 http://www.sciencedirect.com/science/article/pii/S1359029414000806
Lazidis A et al (2016) Whey protein fluid gels for the stabilisation of foams. Food Hydrocoll 53(Supplement C):209–217 http://www.sciencedirect.com/science/article/pii/S0268005X15000831
Lech FJ et al (2014) Identifying changes in chemical, interfacial and foam properties of β-lactoglobulin–sodium dodecyl sulphate mixtures. Colloids Surf A Physicochem Eng Asp 462(Supplement C):34–44 http://www.sciencedirect.com/science/article/pii/S0927775714006931
Maldonado-Valderrama J, Patino JMR (2010) Interfacial rheology of protein–surfactant mixtures. Curr Opin Colloid Interface Sci 15(4):271–282 http://www.sciencedirect.com/science/article/pii/S1359029409001150
Murray BS et al (2011) Preparation and characterization of the foam-stabilizing properties of cellulose–ethyl cellulose complexes for use in foods. J Agric Food Chem 59(24):13277–13288. https://doi.org/10.1021/jf203501p
Neurath H, Bull HB (1938) The surface activity of proteins. Chem Rev 23(3):391–435 http://pubs.acs.org/doi/abs/10.1021/cr60076a001
Norton IT, Jarvis DA, Foster TJ (1999) A molecular model for the formation and properties of fluid gels. Int J Biol Macromol 26(4):255–261 http://www.sciencedirect.com/science/article/pii/S0141813099000914
Park JI et al (2009) A microfluidic approach to chemically driven assembly of colloidal particles at gas–liquid interfaces. Angew Chem Int Ed 48(29):5300–5304. https://doi.org/10.1002/anie.200805204
Patel AR (2015) In: Patel AR (ed) Polymer-based oleogels created using indirect methods. Springer International, Cham, pp 29–39. https://doi.org/10.1007/978-3-319-19138-6_3
Patel AR et al (2012) Stable and temperature-responsive surfactant-free foamulsions with high oil-volume fraction. ChemPhysChem 13(17):3777–3781. https://doi.org/10.1002/cphc.201200564
Patel AR, Schatteman D et al (2013a) A foam-templated approach for fabricating organogels using a water-soluble polymer. RSC Adv 3(45):22900–22903. https://doi.org/10.1039/C3RA44763D
Patel AR, Seijen ten-Hoorn J et al (2013b) Colloidal complexation of a macromolecule with a small molecular weight natural polyphenol: implications in modulating polymer functionalities. Soft Matter 9(5):1428–1436. https://doi.org/10.1039/C2SM27200H
Patel AR et al (2014) Edible oleogels based on water soluble food polymers: preparation, characterization and potential application. Food Funct 5(11):2833–2841. https://doi.org/10.1039/C4FO00624K
Peng D et al (2017) Adsorption and distribution of edible gliadin nanoparticles at the air/water interface. J Agric Food Chem 65(11):2454–2460. https://doi.org/10.1021/acs.jafc.6b05757
Rodrıguez Patino JM, Rodrıguez Niño MR, Sánchez CC (2003) Protein–emulsifier interactions at the air–water interface. Curr Opin Colloid Interface Sci 8(4):387–395 http://www.sciencedirect.com/science/article/pii/S1359029403000955
Rullier B, Novales B, Axelos MAV (2008) Effect of protein aggregates on foaming properties of β-lactoglobulin. Colloids Surf A Physicochem Eng Asp 330(2):96–102 http://www.sciencedirect.com/science/article/pii/S0927775708004925
Sadahira MS et al (2014) Influence of protein–pectin electrostatic interaction on the foam stability mechanism. Carbohydr Polym 103(Supplement C):55–61 http://www.sciencedirect.com/science/article/pii/S0144861713012101
Sadahira MS et al (2016) Effect of egg white protein-pectin electrostatic interactions in a high sugar content system on foaming and foam rheological properties. Food Hydrocoll 58(Supplement C):1–10 http://www.sciencedirect.com/science/article/pii/S0268005X16300376
Saint-Jalmes A (2006) Physical chemistry in foam drainage and coarsening. Soft Matter 2(10):836–849. https://doi.org/10.1039/B606780H
Saint-Jalmes A et al (2005) Differences between protein and surfactant foams: microscopic properties, stability and coarsening. Colloids Surf A Physicochem Eng Aspects 263(1):219–225 http://www.sciencedirect.com/science/article/pii/S0927775705001226
Schmidt I et al (2010) Foaming properties of protein/pectin electrostatic complexes and foam structure at nanoscale. J Colloid Interface Sci 345(2):316–324 http://www.sciencedirect.com/science/article/pii/S0021979710000482
Stocco A et al (2011) Aqueous foams stabilized solely by particles. Soft Matter 7(4):1260–1267. https://doi.org/10.1039/C0SM01290D
Syrbe A, Bauer WJ, Klostermeyer H (1998) Polymer science concepts in dairy systems—an overview of milk protein and food hydrocolloid interaction. Int Dairy J 8(3):179–193 http://www.sciencedirect.com/science/article/pii/S0958694698000417
Tanti R, Barbut S, Marangoni AG (2016a) Hydroxypropyl methylcellulose and methylcellulose structured oil as a replacement for shortening in sandwich cookie creams. Food Hydrocoll 61:329–337 http://www.sciencedirect.com/science/article/pii/S0268005X16302387
Tanti R, Barbut S, Marangoni AG (2016b) Oil stabilization of natural peanut butter using food grade polymers. Food Hydrocoll 61(Supplement C):399–408 http://www.sciencedirect.com/science/article/pii/S0268005X16302429
Tchuenbou-Magaia FL, Norton IT, Cox PW (2009) Hydrophobins stabilised air-filled emulsions for the food industry. Food Hydrocoll 23(7):1877–1885 http://www.sciencedirect.com/science/article/pii/S0268005X09000605
Tzoumaki MV et al (2015) Aqueous foams stabilized by chitin nanocrystals. Soft Matter 11(31):6245–6253. https://doi.org/10.1039/C5SM00720H
Walther A, Muller AHE (2008) Janus particles. Soft Matter 4(4):663–668. https://doi.org/10.1039/B718131K
Wang Z, Zhang S, Vardhanabhuti B (2015) Foaming properties of whey protein isolate and λ-carrageenan mixed systems. J Food Sci 80(8):N1893–N1902. https://doi.org/10.1111/1750-3841.12940
Wege HA et al (2008) Long-term stabilization of foams and emulsions with in-situ formed microparticles from hydrophobic cellulose. Langmuir 24(17):9245–9253. https://doi.org/10.1021/la801634j
Wierenga PA, Gruppen H (2010) New views on foams from protein solutions. Curr Opin Colloid Interface Sci 15(5):365–373 http://www.sciencedirect.com/science/article/pii/S1359029410000592
Wijaya W et al (2017) Functional colloids from proteins and polysaccharides for food applications. Trends Food Sci Technol 68(Supplement C):56–69 http://www.sciencedirect.com/science/article/pii/S0924224417301577
Wilde P et al (2004) Proteins and emulsifiers at liquid interfaces. Adv Colloid Interf Sci 108–109(Supplement C):63–71 http://www.sciencedirect.com/science/article/pii/S0001868603001386
Yucel Falco C et al (2017) Edible foam based on pickering effect of probiotic bacteria and milk proteins. Food Hydrocoll 70(Supplement C):211–218 http://www.sciencedirect.com/science/article/pii/S0268005X17302278
Zhou W et al (2009) How rigid rods self-assemble at curved surfaces. Angew Chem Int Ed 48(2):378–381. https://doi.org/10.1002/anie.200804194
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this chapter
Cite this chapter
Patel, A.R. (2018). Edible Foams Stabilized by Food-Grade Polymers. In: Gutiérrez, T. (eds) Polymers for Food Applications . Springer, Cham. https://doi.org/10.1007/978-3-319-94625-2_10
Download citation
DOI: https://doi.org/10.1007/978-3-319-94625-2_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-94624-5
Online ISBN: 978-3-319-94625-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)