Abstract
The tempering response of fully martensitic microstructures has been well characterized. However, bainitic microstructures may also be found in quenched industrial materials and the present study investigates the tempering response of fully martensitic and fully bainitic microstructures. Specific thermal cycles were developed to generate both microstructures in a boron added 0.17 wt pct carbon steel. The tempering response was assessed through dilatometry and microstructural characterization was conducted using scanning electron microscopy and Mössbauer spectroscopy. The dilatometric analysis of the tempering response of the martensitic microstructures provided information about retained austenite decomposition and cementite precipitation whereas bainitic microstructures showed a less sensitive dilatometric response during tempering likely due to the low amount of carbon in solution and absence of retained austenite as measured by Mössbauer spectroscopy.
References
Irvine, K., & Pickering, F. (1960). The tempering characteristics of low-carbon low-alloy steels. Journal of the Iron and Steel Institute, 194, 137–153.
Speich, G. R., & Leslie, W. C. (1972). Tempering of steel. Metallurgical Transactions, 3, 1043–1054.
Crafts, W., & Lamont, J. L. (1948). Secondary hardening of tempered martensitic alloy steels (pp. 471–512).
Mittemeher, E. J., Cheng, L., Schaaf, P. J., Brakman, C. M., & Korevaar, B. M. (1988). Analysis of nonisothermal transformation kinetics; tempering of iron-carbon and iron-nitrogen martensites. Metallurgical Transactions A, 19, 925–932.
Mittemeijer, E. J. (1992). Review—Analysis of the kinetics of phase transformations. Journal of Materials Science, 27, 3977–3987.
Viswanathan, U. K., Kutty, T. R. G., & Ganguly, C. (1993). Dilatometric technique for evaluation of the kinetics of solid-state transformation of maraging steel. Metallurgical Transactions A, 24, 2653–2656.
Leiva, J. A. V., Morales, E. V., Villar-Cociña, E., Donis, C. A., & Bott, I. S. (2010). Kinetic parameters during the tempering of low-alloy steel through the non-isothermal dilatometry. Journal of Materials Science, 45, 418–428.
Krauss, G. (2015). Steels—Processing, Structure, and Performance (pp. 373–403). Materials Park, OH: ASM International.
Williamson, D. L., Nakazawa, K., & Krauss, G. (1979). A study of the early stages of tempering in an Fe-1.2 Pct alloy. Metallurgical Transactions A, 3, 1351–1363.
Williamson, D. L., Schupmann, R. G., Materkowski, J. P., & Krauss, G. (1979). Determination of small amounts of austenite and carbide in hardened medium carbon steels by Mössbauer spectroscopy. Metallurgical Transactions A, 10, 379–382.
Steven, W., & Haynes, A. G. (1956). The temperature of formation of martensite and bainite in low-alloy steels. Journal of the Iron and Steel Institute, 183, 349–359.
Andrews, K. W. (1965). Empirical formulae for the calculation of some transformation temperatures. Journal of the Iron and Steel Institute, 203, 721–727.
Huffman, G. P., & Huggins, F. E. (1992). The use of Mössbauer spectroscopy in the analysis of the raw materials and products of the steel industry. In AIP Conference Proceedings (Vol. 84, pp. 150–156).
Morra, P. V., Böttger, A. J., & Mittemeijer, E. J. (2001). Decomposition of iron-based martensite: A kinetic analysis by means of differential scanning calorimetry and dilatometry. Journal of Thermal Analysis and Calorimetry, 64, 905–914.
De Moor, E., Lacroix, S., Samek, L., Penning, J., & Speer, J. G. (2006). Dilatometric study of the quench and partitioning process. In 3rd International Conference on Advanced Structural Steels (pp. 1–6).
Pierce, D. T., Coughlin, D. R., Williamson, D. L., Clarke, K. D., Clarke, A. J., Speer, J. G., et al. (2015). Characterization of transition carbides in quench and partitioned steel microstructures by Mössbauer spectroscopy and complementary techniques. Acta Materialia, 90, 417–430.
Le Caer, G., Dubois, J. M., & Senateur, J. P. (1976). Etude par Spectrométrie Mössbauer des Carbures de Fer Fe3C et Fe5C2. Journal of Solid State Chemistry, 19, 19–28.
Schaaf, P., Wiesen, S., & Gonser, U. (1992). Mössbauer study of iron carbides: Cementite (Fe,M)3C (M = Cr, Mn) with various manganese and chromium contents. Acta Metallurgica et Materialia, 40, 373–379.
Jung, M., Lee, S. J., & Lee, Y. K. (2009). Microstructural and dilatational changes during tempering and tempering kinetics in martensitic medium-carbon steel. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 40, 551–559.
Bhadeshia, H. (2001). Bainite in steels transformations, microstructure and properties (pp. 91–92). London: IOM Communications Ltd.
Acknowledgements
The support of the sponsors of the Advanced Steel Processing and Products Research Center, an industry-university cooperative research center at the Colorado School of Mines, and the Roberto Rocca Education Program is gratefully acknowledged. Tata Steel is also gratefully acknowledged for providing the material.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Vieira, I., De Moor, E. (2017). Tempering Response of Bainitic and Martensitic Microstructures. In: Meyers, M., et al. Proceedings of the 3rd Pan American Materials Congress. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-52132-9_78
Download citation
DOI: https://doi.org/10.1007/978-3-319-52132-9_78
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-52131-2
Online ISBN: 978-3-319-52132-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)