Abstract
For axisymmetric configurations of rotating disk systems, fluid flow and heat transfer can be analyzed using powerful mathematical methods such as the self-similar solutions. These solutions cover the free rotating disk without any additional forced flow and the rotating disk placed perpendicular to a uniform stream. They represent important limit cases for the more general configuration of an inclined rotating disk, and since there are a lot of reliable data for these cases, they are useful for validating experimental or numerical methods. However, sometimes the analytical treatment is only valid under certain conditions that might not be fulfilled in practical applications, for example, in the case of a stagnation flow onto an orthogonal disk. A closed self-similar solution is only known for an infinite disk, and its application to finite disks in uniform streams still has to be confirmed.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Dorfman LA (1963) Hydrodynamic resistance and the heat loss of rotating solids. Oliver & Boyd, Edinburgh
Owen JM, Rogers RH (1989) Flow and heat transfer in rotating disc systems, vol 1, Rotor-stator systems. Research Studies Press Ltd., Taunton
Owen JM, Rogers RH (1989) Flow and heat transfer in rotating disc systems, vol 2, Rotating cavities. Research Studies Press Ltd., Taunton
Shevchuk IV (2009) Convective heat and mass transfer in rotating disk systems. Springer, Berlin
Eaton JK (1996) Structure and modeling of the three dimensional boundary layer on a rotating disk. Final Report to U.S. Department of Energy, Grant Number DE-FG03-93ER14317-A000, Stanford University
Elkins CJ, Eaton JK (2000) Turbulent heat and momentum transport on a rotating disk. J Fluid Mech 402:225–253
Dennis RW, Newstead C, Ede AJ (1970) The heat transfer from a rotating disc in an air crossflow. In: Proceedings of 4th International Heat Transfer Conference, Paris-Versailles, 1970 (paper FC 7.1)
Booth GL, de Vere APC (1974) Convective heat transfer from a rotating disc in a transverse air stream. In: Proceedings of 5th International Heat Transfer Conference, Tokyo, 1974 (paper FC1.7)
Trinkl CM, Bardas U, Weyck A, aus der Wiesche S (2011) Experimental study of the convective heat transfer from a rotating disc subjected to forced air streams. Int J Therm Sci 50:73–80
Gregory N, Stuart JT, Walker WS (1956) On the stability of the three-dimensional boundary layers with application to the flow due to a rotating disk. Phil Trans Roy Soc A 248:155–199
Malik MR, Wilkinson SP, Orszag SA (1981) Instability and transition in a rotating disc. AIAA J 19:1131–1138
Smith NH (1946) Exploratory investigation of laminar boundary layer oscillations on a rotating disc. NACA Tech. Note 1227: 1–21
Popiel CO, Boguslawski L (1975) Local heat-transfer coefficients on the rotating disk in still air. Int J Heat Mass Transf 18:167–170
Elkins CJ, Eaton JK (1997) Heat transfer in the rotating disk boundary layer. Thermosciences Division Report TSD-103, Stanford University
Beg SA (1973) Forced convective mass transfer from circular disks. Wärme- und Stoffübertragung (Heat Mass Transfer) 1:45–51
Kottke V, Blenke H, Schmidt KG (1977) Messung und Berechnung des örtlichen und mittleren Stoffüberganges an stumpf angeströmten Kreisscheiben bei unterschiedlicher Turbulenz. Wärme- und Stoffübertragung (Heat Mass Transfer) 10:89–105
Mabuchi I, Tanaka T, Sakakibara Y (1971) Studies of convective heat transfer from a rotating disk (5th Report, Experiment on the laminar heat transfer from a rotating isothermal disk in a uniformed forced stream). Bull JSME 14:581–589
Schlichting H, Gersten K (1997) Grenzschicht-Theorie, 9th edn. Springer, Berlin
Helcig C, aus der Wiesche S (2013) The effect of the incidence angle on the flow over a rotating disk subjected to forced air streams. In: Proceedings ASME Fluids Engineering Summer Meeting, Incline Village, Nevada (paper FEDSM2013-16360)
Cheng W, Lin H (1994) Unsteady and steady mass transfer by laminar forced flow against a rotating disk. Heat Mass Transf 30:101–108
Martin H (1977) Heat and mass transfer between impinging gas jets and solid surfaces. Adv Heat Transf 13:1–60
Downs SJ, James EH (1987) Jet impingement heat transfer—a literature survey. ASME paper 87-HT-35
Jambunathan EL, Lai E, Moss MA, Button BL (1992) A review of heat transfer data for single circular jet impingement. Int J Heat Fluid Flow 13:106–115
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2016 The Author(s)
About this chapter
Cite this chapter
aus der Wiesche, S., Helcig, C. (2016). Axisymmetric Configurations. In: Convective Heat Transfer From Rotating Disks Subjected To Streams Of Air. SpringerBriefs in Applied Sciences and Technology(). Springer, Cham. https://doi.org/10.1007/978-3-319-20167-2_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-20167-2_4
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-20166-5
Online ISBN: 978-3-319-20167-2
eBook Packages: EngineeringEngineering (R0)