Abstract
The number and size of 3D printing programs within hospitals are growing. The technical aspects of 3D printing in a hospital or medical center including image segmentation, computer-aided design (CAD), 3D printing, post-processing, and quality control are complex and highly interdisciplinary requiring close collaboration between the radiologist, the ordering clinician, and the engineer. This skill gap necessitates expanding the unmet need for a teaching resource focused on how to set up a well-equipped hospital-based 3D printing laboratory in a healthcare facility (HCF)—or at the point of care (POC)—and ensure best practices for manufacturing high-quality and safe patient-specific anatomic models and guides. The purpose of this chapter is to fill this need, building on the author’s practical experiences to date. We share our experiences building a basic 3D printing laboratory that has now evolved to an intermediate-scale laboratory, equipped with full-color 3D printing. We discuss the goals of our institutional 3D printing laboratory and how that determines the practical steps we follow to ensure the quality and safety of our 3D printed models. Our definitions and explanation of quality inherently necessitate a deep evaluation of the entire medical 3D printing workflow, best practices, and likely failure points. This chapter provides best practices in the form of a primer written by individuals with extensive hands-on experience in hospital-based 3D printing. The material is far from comprehensive; however, we believe that our collective experience and learning conveyed succinctly in this chapter will be useful to medical 3D printing practitioners in beginning- and intermediate-level laboratories.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Mitsouras D, et al. Medical 3D printing for the radiologist. Radiographics. 2015;35:1965–88.
Ravi P, et al. Utility and costs during the initial year of 3D printing in an academic hospital. J Am Coll Radiol. 2022a;20:193.
Bastawrous S, et al. Establishing quality and safety in hospital-based 3D printing programs: patient-first approach. Radiographics. 2021;41(4):1208–29.
Ravi P, et al. A systematic evaluation of medical 3D printing accuracy of multi-pathological anatomical models for surgical planning manufactured in elastic and rigid material using desktop inverted vat photopolymerization. Med Phys. 2021a;48:3223–33.
Ravi P, et al. Medical 3D printing dimensional accuracy for multi-pathological anatomical models 3D printed using material extrusion. J Digit Imaging. 2022b;35:613–22.
Ravi P, Antoline S, Rybicki FJ. 3D printing of open-source respirators (including N95 respirators), surgical masks, and community mask designs to address COVID-19 shortages. In: 3D printing in medicine and its role in the COVID-19 pandemic. Springer; 2021b. p. 91–106.
Tino R, et al. COVID-19 and the role of 3D printing in medicine. 3D Print Med. 2020;6:11. https://doi.org/10.1186/s41205-020-00064-7.
Ravi P, Chen VCP. A focused simulation-based optimization of print time and material usage with respect to orientation, layer height and support settings for multi-pathological anatomical models in inverted vat photopolymerization 3D printing. 3D Print Med. 2021;7:23. https://doi.org/10.1186/s41205-021-00112-w.
Fogarasi M, Coburn JC, Ripley B. Algorithms used in medical image segmentation for 3D printing and how to understand and quantify their performance. 3D Print Med. 2022;8:18. https://doi.org/10.1186/s41205-022-00145-9.
Rybicki FJ. The impact of regulation, reimbursement, and research on the value of 3D printing and other 3D procedures in medicine. 3D Print Med. 2022;8:6. https://doi.org/10.1186/s41205-022-00132-0.
Chepelev L, et al. Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios. 3D Print Med. 2018; 4:11. https://doi.org/10.1186/s41205-018-0030-y.
Fedorov A, et al. 3D slicer as an image computing platform for the quantitative imaging network. Magn Reson Imaging. 2012;30(9):1323–41.
Mitsouras D, et al. Radiographics update: medical 3D printing for the radiologist. Radiographics. 2020;40:E21–3.
Di Prima M, et al. Additively manufactured medical products—the FDA perspective. 3D Print Med. 2016; 2:1. https://doi.org/10.1186/s41205-016-0005-9.
U.S. Food and Drug Administration. Discussion paper: 3D printing medical devices at the point of care. 2021.
Ghosh RM et al. Clinical 3D modeling to guide pediatric cardiothoracic surgery and intervention using 3D printed anatomic models, computer aided design and virtual reality. 3D Print Med 2022;8:11. https://doi.org/10.1186/s41205-022-00137-9.
Muff JL et al. Clinical acceptance of advanced visualization methods: a comparison study of 3D-print, virtual reality glasses, and 3D-display. 3D Print Med 2022;8:5. https://doi.org/10.1186/s41205-022-00133-z.
Shine KM, Schlegel L, Ho M, et al. From the ground up: understanding the developing infrastructure and resources of 3D printing facilities in hospital-based settings. 3D Print Med. 2022;8:21. https://doi.org/10.1186/s41205-022-00147-7.
UL 3400. Outline of investigation for additive manufacturing facility safety management. Underwriters Laboratory LLC; 2017. p. 1–32.
Rybicki FJ, et al. Initial evaluation of coronary images from 320-detector row computed tomography. Int J Cardiovasc Imaging. 2008;24:535–46.
Steigner ML, et al. Narrowing the phase window width in prospectively ECG-gated single heart beat 320-detector row coronary CT angiography. Int J Cardiovasc Imaging. 2009;25:85–90.
George E, et al. Measuring and establishing the accuracy and reproducibility of 3D printed medical models. Radiographics. 2017;37:1424–50.
Rybicki FJ. Medical 3D printing and the physician-artist. Lancet. 2018;391:651–2.
Senderovich N, Shah S, Ow TJ, et al. Assessment of Staphylococcus Aureus growth on biocompatible 3D printed materials. 3D Print Med. 2023;9:30. https://doi.org/10.1186/s41205-023-00195-7.
Acknowledgements
This chapter is an update of Chap. 11, “Quality and Safety of 3D-Printed Medical Models,” from the first edition of 3D Printing in Medicine published in 2017. The authors gratefully acknowledge Elizabeth George, MBBS, and Dimitrios Mitsouras, PhD, who authored the first edition.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Ravi, P., Sriwastwa, A., Chokshi, S., Kondor, S., Rybicki, F.J. (2024). Establishing a Medical 3D Printing Lab and Considerations for Ensuring Quality of the 3D Printed Medical Parts. In: Rybicki, F.J., Morris, J.M., Grant, G.T. (eds) 3D Printing at Hospitals and Medical Centers. Springer, Cham. https://doi.org/10.1007/978-3-031-42851-7_18
Download citation
DOI: https://doi.org/10.1007/978-3-031-42851-7_18
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-42850-0
Online ISBN: 978-3-031-42851-7
eBook Packages: MedicineMedicine (R0)