Abstract
In this paper, we present the possibilities of implementing augmented reality in the automotive industry. We will show the directions of augmented reality applications and we focus primarily on head-up displays, specifically on augmented reality head-up displays. In the first part, the chapter presents the use of augmented reality in the automotive industry from research, development, assembly, disassembly to our chosen issue of head-up displays. Subsequently, we presented and compared the three basic principles of head-up displays. The first is a fully graphical head-up display projected on the windshield, the second is a head-up display projected on a retractable translucent screen, and the third type is a head-up display projected from a mobile phone using specific applications. Each of the evaluated technologies has its advantages and disadvantages. This chapter points out the required parameters and possibilities how to increase driving safety and shorten the time when the driver is not engaged in driving. In the end, the individual technical solutions and mobile applications are compared. In this chapter, we try to point out that projecting information about the vehicle and driving significantly simplifies the driving process and allows the driver to focus exclusively on the road.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Buń, P., Trojanowska, J., & Rewers, P. (2019). VR and AR in lean manufacturing classes. In J. Trojanowska, O. Ciszak, J. Machado, & I. Pavlenko (Eds.), Advances in manufacturing II. MANUFACTURING 2019 (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-030-18715-6_29
Dunleavy, M. (2014). Design principles for augmented reality learning. Tech Trends, 58, 28–34. https://doi.org/10.1007/s11528-013-0717-2
Kascak, J., et al. (2019). Implementation of augmented reality into the training and educational process in order to support spatial perception in technical documentation. In IEEE 6th international conference on industrial engineering and applications (ICIEA) (pp. 583–587). IEEE. https://doi.org/10.1109/IEA.2019.8715120
Stadler, S., Cornet, H., Mazeas, D., Chardonnet, J.-R., & Frenkler, F. (2020). ImPro: Immersive prototyping in virtual environments for industrial designers. In Proceedings of the design society: DESIGN conference (pp. 1375–1384). Cambridge University Press. https://doi.org/10.1017/dsd.2020.81
Trojanowski, P., & Trojanowska, J. (2021). Reliability of road transport means as a factor affecting the risk of failure – The transport problem case study. In V. Ivanov, J. Trojanowska, I. Pavlenko, J. Zajac, & Perakovi’c, D. (Eds.), Advances in design, simulation and manufacturing IV. DSMIE 2021 (Lecture Notes in Mechanical Engineering) (pp. 253–261). Springer. https://doi.org/10.1007/978-3-030-77719-7_26
Židek, K., Maxim, V., Pitel, J., & Hosovsky, A. (2016). Embedded vision equipment of industrial robot for inline detection of product errors by clustering-classification algorithms. International Journal of Advanced Robotic Systems, 13, 1–10. https://doi.org/10.1177/1729881416664901
Himperich, F. (2007). Applications in augmented reality in the automotive industry (pp. 1–21). Fachgebiet Augmented Reality, Department of Informatics.
Židek, K., et al. (2020). Digital twin of experimental smart manufacturing assembly system for industry 4.0 concept. Sustainability, 12(9), 3658. https://doi.org/10.3390/su12093658
Kujawińska, A., & Diering, M. (2021). The impact of the organization of the visual inspection process on its effectiveness. The International Journal of Advanced Manufacturing Technology., JAMT-D-20-02941R1, 112, 1295–1306. https://doi.org/10.1007/s00170-020-06543-9
Varela, M. L. R., Putnik, G. D., Manupati, V. K., et al. (2021). Integrated process planning and scheduling in networked manufacturing systems for I4.0: A review and framework proposal. Wireless Networks, 27, 1587–1599. https://doi.org/10.1007/s11276-019-02082-8
Gay-Bellile, V., Bourgeois, S., & Tamaazousti, M. (2015). Applications of augmented reality for the automotive industry. In W. Barfield (Ed.), Fundamentals of wearable computers and augmented reality (2nd ed., pp. 433–456). CRC Press.
Antosz, K., & Stadnicka, D. (2018). An intelligent system supporting a forklifts maintenance process. In A. Burduk & D. Mazurkiewicz (Eds.), Intelligent systems in production engineering and maintenance – ISPEM 2017. ISPEM 2017 (Advances in Intelligent Systems and Computing) (Vol. 637). Springer. https://doi.org/10.1007/978-3-319-64465-3_2
Tokorova, M., et al. (2020). Augmented reality as a support tool in machining process. Tem Journal, 9(1), 407–411. https://doi.org/10.18421/TEM91-56
Sharma, R., & Molineros, J. (1997). Computer vision-based augmented reality for guiding manual assembly. Presence: Teleoperators and Virtual Environments, 6(3), 292–317. https://doi.org/10.1162/pres.1997.6.3.292
Trojanowski, P. (2020). Comparative analysis of the impact of road infrastructure development on road safety–a case study. Scientific Journals of the Maritime University of Szczecin, 63(135), 23–28. https://doi.org/10.17402/436
Boboc, R. G., Gîrbacia, F., & Butilă, E. V. (2020). The application of augmented reality in the automotive industry: A systematic literature review. Applied Sciences, 10, 4259. https://doi.org/10.3390/app10124259
Gorski, F., Bun, P., & Stefanska, K. (2022). Use of virtual mirror in design of individualized orthopedic supplies. In J. Machado, F. Soares, J. Trojanowska, & E. Ottaviano (Eds.), Innovations in mechanical engineering. ICIENG 2021 (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-030-79165-0_36
Demčák, J., Lishchenko, N., Pavlenko, I., Pitel’, J., & Židek, K. (2022). The experimental SMART manufacturing system in SmartTechLab. In J. Trojanowska, A. Kujawińska, J. Machado, & I. Pavlenko (Eds.), Advances in manufacturing III. MANUFACTURING 2022 (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-030-99310-8_18
Häuslschmid, R. (2018). Extending head-up displays: Exploring the potential of large & 3D automotive windshield displays. Dissertation, LMU München. https://doi.org/10.5282/edoc.22766
Kaščak, J., Husár, J., Knapčíková, L., Trojanowska, J., & Ivanov, V. (2022). Conceptual use of augmented reality in the maintenance of manufacturing facilities. In J. Trojanowska, A. Kujawińska, J. Machado, & I. Pavlenko (Eds.), Advances in manufacturing III. MANUFACTURING 2022 (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-030-99310-8_19
Kawęcki, N., & Gola, A. (2022). Pick performance system as an IT support for order completing – A case study. In J. Trojanowska, A. Kujawińska, J. Machado, & I. Pavlenko (Eds.), Advances in manufacturing III. MANUFACTURING 2022 (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-030-99310-8_9
Trojanowski, P., Trusz, A., & Stupin, B. (2022). Correlation between accidents on selected roads as fundamental for determining the safety level of road infrastructure. In V. Ivanov, J. Trojanowska, I. Pavlenko, E. Rauch, & D. Peraković (Eds.), Advances in design, simulation and manufacturing V. DSMIE 2022 (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-031-06025-0_11
Menk, C., Eduard, J., & Reinhard, K. (2010). Evaluation of geometric registration methods for using spatial augmented reality in the automotive industry. In Vision, modeling, and visualization workshop (pp. 243–250). https://doi.org/10.2312/PE/VMV/VMV10/243-250
Saxena, D. (2022, November 10). How to use your smartphone as heads-up display. https://wethegeek.com/how-to-use-your-smartphone-as-heads-up-display. Accessed 16 June 2022.
Kluz, R., & Antosz, K. (2019). Simulation of flexible manufacturing systems as an element of education towards industry 4.0. In J. Trojanowska, O. Ciszak, J. Machado, & I. Pavlenko (Eds.), Advances in manufacturing II. MANUFACTURING 2019 (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-030-18715-6_28
Sharma, L. (2019). Recent advancements of augmented reality in real time applications. International Journal of Recent Technology and Engineering, 8, 537–542. https://doi.org/10.35940/ijrte.B10100.0782S719
Lv, Z., Halawani, A., Feng, S., et al. (2015). Touch-less interactive augmented reality game on vision-based wearable device. Personal and Ubiquitous Computing, 19, 551–567. https://doi.org/10.1007/s00779-015-0844-1
Kłosowski, G., Gola, A., & Thibbotuwawa, A. (2018). Computational intelligence in control of AGV multimodal systems. IFAC-PapersOnline, 51(11), 1421–1427. https://doi.org/10.1016/j.ifacol.2018.08.315
Antosz, K., Pasko, L., & Gola, A. (2019). The use of intelligent systems to support the decision-making process in lean maintenance management. IFAC PapersOnLine, 52(10), 148–153. https://doi.org/10.1016/j.ifacol.2019.10.005
Acknowledgements
This work was supported by the projects VEGA 1/0268/22 and KEGA 038TUKE-4/2022 granted by the Ministry of Education, Science, Research and Sport of the Slovak Republic.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Husár, J., Hrehova, S., Knapčíková, L., Trojanowska, J. (2023). Comparison of the Principles of Head-Up Display Technologies forthe Implementation of Augmented Reality in the Automotive Industry: AStudy. In: Knapčíková, L., Peraković, D. (eds) 7th EAI International Conference on Management of Manufacturing Systems. MMS 2022. EAI/Springer Innovations in Communication and Computing. Springer, Cham. https://doi.org/10.1007/978-3-031-22719-6_2
Download citation
DOI: https://doi.org/10.1007/978-3-031-22719-6_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-22718-9
Online ISBN: 978-3-031-22719-6
eBook Packages: EngineeringEngineering (R0)