Abstract
In recent years, the demand for plastic and polymeric materials has been increasing, and it is an inevitable fact that it is an important sector to be considered in terms of sustainability. Both the producer and the consumer consider plastic and polymeric composites as clean and environmentally friendly engineered materials. In the last two decades, scientists have revealed that there has been an increasing interest in using environmentally friendly natural resources to develop polymer materials with synthetic substitute material properties and optimum performance, with the growing concern of the negative environmental effects of artificial materials. Bio-based materials are an indispensable reality for a future sustainable society. The fact that there are about three trillion trees on earth is the fact that wood is one of the most abundant renewable/sustainable materials. Living trees are a biological material with a longer service life by storing carbon dioxide using solar energy, as it is of biodegradable origin. For this reason, it is considered as an important building material for sustainable development. Nanotechnology is a new field that finds its place in almost every industry. Wood nanotechnology is a sector that can both use abundant resources in nature and allow the production of cutting-edge materials with improved mechanical performance. The modification of wood with nanotechnology is based on the principles of green chemistry and on the use of bio-based polymers and nanoparticle technology as well, which leads to a reduction in the overall environmental impact. In addition, it is an inevitable fact that successful wood nanotechnology depends on nanoscience to improve its processing and structural properties. This chapter tries to review potential application of nanomaterials in wood-plastic composites and to introduce their useful aspects in terms of the improved properties.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Agustin MB, Penttilä PA, Lahtinen M, Mikkonen KS (2019) Rapid and direct preparation of lignin nanoparticles from alkaline pulping liquor by mild ultrasonication. ACS Sustain Chem Eng 7:19925–19934
Al G, Aydemir D, Ayrilmis N, Kaygin B, Gunduz G (2018) The effect of nanoboron nitride on some properties of biopolymer nanocomposites with cellulose nanofibrils and nanoclays. Drvna Industrija 69:43–48
Alqahtani MS, Alqahtani A, Kazi M, Ahmad MZ, Alahmari A, Alsenaidy MA, Syed R (2020) Wound-healing potential of curcumin loaded lignin nanoparticles. J Drug Deliv Sci Technol 60:102020
Altan M, Yildirim H (2010) Mechanical and morphological properties of polypropylene and high-density polyethylene matrix composites reinforced with surface modified Nanosized TiO2 particles. World Acad Sci Eng Technol 4:246–251
Amini S, Saudi A, Amirpour N, Jahromi M, Najafabadi SS, Kazemi M, Rafienia M, Salehi H (2020) Application of electrospun polycaprolactone fibers embedding lignin nanoparticle for peripheral nerve regeneration: in vitro and in vivo study. Int J Biol Macromol 159:154–173
Antov P, Jivkov V, Savov V, Simeonova R, Yavorov N (2020) Structural application of eco-friendly composites from recycled wood fibres bonded with magnesium lignosulfonate. Appl Sci 10:7526
Antov P, Savov V, Krišt’ák L, Réh R, Mantanis GI (2021a) Eco-friendly, high-density fiberboards bonded with urea-formaldehyde and ammonium lignosulfonate. Polymers 13:220
Antov P, Savov V, Trichkov N, Krišťák Ľ, Réh R, Papadopoulos AN, Taghiyari HR, Pizzi A, Kunecová D, Pachikova M (2021b) Properties of high-density fiberboard bonded with urea–formaldehyde resin and ammonium lignosulfonate as a bio-based additive. Polymers 13(16):2775
Anwar Z, Gulfraz M, Irshad M (2014) Agro-industrial lignocellulosic biomass a key to unlock the future bio-energy: a brief review. J Radiat Res Appl Sci 7:163–173
Ashori A (2013) Effects of nanoparticles on the mechanical properties of rice straw/polypropylene composites. J Compos Mater 47:149–154
Aslan M (2008) Odun plastik kompozitlerinde geri dönüşüm ve atık malzeme kullanımı.VI. Ulusal orman fakülteleri öğrencileri kongresi. 63–67
Athinarayanan J, Periasamy VS, Alhazmi M, Alatiah KA, Alshatwi AA (2015) Synthesis of biogenic silica nanoparticles from rice husks for biomedical applications. Ceram Int 41(1):275–281
Aulin C, Ström G (2013) Multilayered alkyd resin/nanocellulose coatings for use in renewable packaging solutions with a high level of moisture resistance. Ind Eng Chem Res 52:2582–2589
Aydemir D, Kiziltas A, Gardner DJ, Han Y, Gunduz G (2014a) Morphological characterization of foamed natural filler-reinforced styrene-maleic anhydride (SMA) composites. J Porous Mater 21:1059–1067
Aydemir D, Kiziltas A, Gardner DJ, Han Y, Gunduz G (2014b) Influence of micro- and nanonatural fillers on mechanical and physical properties of foamed SMA composites. Polym-Plast Technol Eng 53:1825–1831
Aydemir D, Kiziltas A, Kiziltas EE, Gardner DJ, Gunduz G (2015) Heat-treated wood–nylon 6 composites. Compos Part B Eng 68:414–423
Aydemir D, Kiziltas A, Gardner DJ, Han Y, Gunduz G (2015a) Thermal analysis of micro- and nano lignocellulosic reinforced styrene maleic anhydride composite foams. Int J Polym Anal Charact 20:231–239
Aydemir D, Kiziltas A, Gunduz G, Han Y, Gardner DJ (2015b) Natural fillers-filled styrene maleic anhydride copolymer composites. Wood Res 60:167–174
Ballesteros LF, Michelin M, Vicente AA, Teixeira JA, Cerqueira MÂ (2018) Use of lignocellulosic materials in bio-based packaging. In: Lignocellulosic materials and their use in bio-based packaging. Springer, Cham, pp 65–85
Balli B, Calimli MH, Kuyuldar E, Sen F (2019) Synthesis, characterization, and applications of hemicellulose based eco-friendly polymer composites. In: Inamuddin, Thomas S, Kumar Mishra R, Asiri A (eds) Sustainable polymer composites and nanocomposites. Springer, Cham
Bari E, Taghiyari HR, Schmidt O, Ghorbani A, Aghababaei H (2015) Effects of nano-clay on biological resistance of woodplastic composite against five wood-deteriorating fungi. Maderas Cienc Tecnol 17(1):205–212
Basu A, Lindh J, Ålander E, Strømme M, Ferraz N (2017) On the use of ion-crosslinked nanocellulose hydrogels for wound healing solutions: physicochemical properties and application-oriented biocompatibility studies. Carbohydr Polym 174:299–308
Bayer IS, Guzman-Puyol S, Heredia-Guerrero JA, Ceseracciu L, Pignatelli F, Ruffilli R, Cingolani R, Athanassiou A (2014) Direct transformation of edible vegetable waste into bioplastics. Macromolecules 47:5135–5143
Beisl S, Adamcyk J, Friedl A (2020) Direct precipitation of lignin nanoparticles from wheat straw organosolv liquors using a static mixer. Molecules 25:1388
Berglund L (2005) Cellulose-based nanocomposites. In: Natural fibers, biopolymers and biocomposites. CRC Press, pp 835–858
Bertolo MRV, Brenelli de Paiva LB, Nascimento VM, Gandin CA, Neto MO, Driemeier CE, Rabelo SC (2019) Lignins from sugarcane bagasse: renewable source of nanoparticles as Pickering emulsions stabilizers for bioactive compounds encapsulation. Ind Crop Prod 140:111591
Bhandari J, Mishra H, Mishra PK, Wimmer R, Ahmad ZJ, Talegaonkar S (2017) Cellulose nanofiber aerogel as a promising biomaterial for customized oral drug delivery. Int J Nanomedicine 12:2021–2031
Bledzki AK, Sperber VE, Faruk O (2002) Natural and wood fibre reinforcement in polymers. Rapra Review Reports, vol. 13, No. 8, Report 152
Brown BJ, Hanson ME, Liverman DM, Merideth RW (1987) Global sustainability: toward definition, environmental management, vol 11. Springer, New York, pp 713–719
Brownell B (2021) Control or affect? The paradox of 3D-printed wood. Technol Arch Des 5(1):112–115
Cai X, Riedl B, Wan H, Zhang SY (2010) Montmorillonite nanoparticle distribution and morphology in melamine-urea-formaldehyde resin-impregnated wood nanocomposites. Wood Fiber Sci 42:285–291
Calvino C, Macke N, Kato R, Rowan SJ (2020) Development, processing and applications of bio-sourced cellulose nanocrystal composites. Prog Polym Sci 103:101221
Calvo-Flores FG, Dobado JA (2010) Lignin as renewable raw material. ChemSusChem 3:1227–1235
Candan Z (2012) Nanoparticles use in manufacture of wood-based sandwich panels and laminate flooring and its effects on technological properties. Ph.D. Dissertation, Istanbul University, Istanbul
Candan Z, Akbulut T (2013) Developing environmentally friendly wood composite panels by nanotechnology. Bioresources 8:3590–3598
Candan Z, Akbulut T (2014) Nano-engineered plywood panels: performance properties. Compos Part B 64:155–161
Candan Z, Akbulut T (2015) Physical and mechanical properties of nanoreinforced particleboard composites. Maderas Cienc Tecnol 17(2):319–334
Candan Z, Gardner DJ, Shaler SM (2016) Dynamic mechanical thermal analysis (DMTA) of cellulose nanofibril/nanoclay/pMDI nanocomposites. Compos Part B 90:126–132
Candan Z, Tozluoglu A, Gonultas O, Yildirim M, Fidan H, Alma MH, Salan T (2022) Nanocellulose: sustainable biomaterial for developing novel adhesives and composites. In: Industrial applications of nanocellulose and its nanocomposites. Elsevier, United Kingdom, pp 49–137
Carmichael E, Ghassemieh E, Lyons G (2020) Biorefining of lignocellulosic feedstock and waste materials using ionic liquid. Mater Sci Eng B 262:114741
Carpenter AW, de Lannoy CF, Wiesner MR (2015) Cellulose nanomaterials in water treatment technologies. Environ Sci Technol 49(9):5277–5287
Carvalheiro F, Duarte LC, Girio FM (2008) Hemicellulose biorefineries: a review on biomass pretreatments. J Sci Ind Res 67:849–864
Chaochanchaikul K, Sombatsompop N (2011) Stabilizations of molecular structures and mechanical properties of PVC and wood/PVC composites by Tinuvin and TiO2 stabilizers. Polym Eng Sci 7:1354–1365
Chaochanchaikul K, Rosarpitak V, Sombatsompop N (2011) Structural and thermal stabilizations of PVC and wood/PVC composites by metal stearates and organotin. Bioresources 6(3):3115–3131
Chauhan PK (2020) Lignin nanoparticles: eco-friendly and versatile tool for new era. Bioresour Technol Rep 9:100374
Chen L (2009) Extrudable relamine resin for wood plastic composite, Master of Science Civil Engineering. Washington State Unıversity/ Department of Civil and Environmental Engineering, 8–9
Chen GG, Qi XM, Guan Y, Peng F, Yao CL, Sun RC (2016) High strength hemicellulose-based nanocomposite film for food packaging applications. ACS Sustain Chem Eng 4(4):1985–1993
Chen L, Shi Y, Gao B, Zhao Y, Jiang Y, Zha Z, Xue W, Gong L (2020) Lignin nanoparticles: green synthesis in a γ-valerolactone/water binary solvent and application to enhance antimicrobial activity of essential oils. ACS Sustain Chem Eng 8:714–722
Clemons CM, Caulfi DF (2005) Natural fibers. Functional fillers for plastics. Wiley-VCH, Weinheim, pp 195–220
Cornwall W (2016) Tall Timber. Science 353:1354–1356
Crowther TW, Glick HB, Covey KR, Bettigole C, Maynard D, Thomas SM et al (2015) Mapping tree density at a global scale. Nature 525:201–205
Dahman Y, Oktem AT (2012) Optically transparent nanocomposites reinforced with modified biocellulose nanofibers. J Appl Polym Sci 126(S1):E188–E196
Dai L, Liu R, Hu LQ, Zou ZF, Si CL (2017) Lignin nanoparticle as a novel green carrier for the efficient delivery of resveratrol. ACS Sustain Chem Eng 5:8241–8249
Daus S, Heinze T (2010) Xylan-based nanoparticles: prodrugs for ibuprofen release. Macromol Biosci 10(2):211–220
De Windt TS, Hendriks JAA, Zhao X, Vonk LA, Creemers LB, Dhert WJA, Randolph MA, Saris DBF (2014) Concise review: Unraveling stem cell cocultures in regenerative medicine: which cell interactions steer cartilage regeneration and how? Stem Cells Transl Med 3:723–733
Deka BK, Maji TK (2012) Effect of SiO2 and nano clay on the properties of wood polymer nanocomposite. Polym Bull 10:60–75
Deka BK, Mandal M, Maji TK (2012) Effect of nanoparticles on flammability, UV resistance, biodegradability, and chemical resistance of wood polymer nanocomposite. Ind Eng Chem Res 51:11881–11891
DePolo JL, Baird DG (2009) Particulate reinforced PC/PBT composites. II. Effect of nano-clay particles on dimensional stability and structure-property relationships. Polym Compos 30:200–213
Devi RR, Maji TK (2007) Effect of glycidyl methacrylate on the physical properties of wood−polymer composites. Polym Compos 28:1
Devi RR, Maji TK (2012) Effect of nano-ZnO on thermal, mechanical, UV stability, and other physical properties of wood polymer composites. Ind Eng Chem Res 51:10
Doh H, Lee MH, Whiteside WS (2020) Physicochemical characteristics of cellulose nanocrystals isolated from seaweed biomass. Food Hydrocoll 102:105542
Domingues RM, Gomes ME, Reis RL (2014) The potential of cellulose nanocrystals in tissue engineering strategies. Biomacromolecules 15(7):2327–2346
Drobny JG (2014) Additives. Handbook of thermoplastic elastomers. Elsevier. 2014:17–32.
Du F, Zhang L, Ma J, Peng X (2019) Hemicelluloses supported palladium/xylan nanocomposites containing N and O ligands: highly-performance heterogeneous catalysts for Suzuki reaction. Carbohydr Polym 217:224–231
El-Haggar SM, Kamel MA (2011) Wood plastic composites. Adv Compos 13:325–343
El-Samahy MA, Mohamed SA, Rehim MHA, Mohram ME (2017) Synthesis of hybrid paper sheets with enhanced air barrier and antimicrobial properties for food packaging. Carbohydr Polym 168:212–219
Fahma F, Hori N, Iwata T, Takemura A (2013) The morphology and properties of poly (methyl methacrylate)-cellulose nanocomposites prepared by immersion precipitation method. J Appl Polym Sci 128(3):1563–1568
Figueiredo P, Lintinen K, Hirvonen JT, Kostiainen MA, Santos HA (2018) Properties and chemical modifications of lignin: towards lignin-based nanomaterials for biochemical applications. Prog Mater Sci 93:233–269
Fornué E, Graham Allan G, Héctor J, González G, Saucedo J (2011) Fundamental aspects of adhesion between cellulosic surfaces in contact—a review. O Pap 72:85–90
Foroughi F, Rezvani Ghomi E, Morshedi Dehaghi F, Borayek R, Ramakrishna S (2021) A review on the life cycle assessment of cellulose: from properties to the potential of making it a low carbon material. Mater Basel 14:714
Fortunati E, Puglia D, Monti M, Santulli C, Maniruzzaman M, Kenny JM (2013) Cellulose nanocrystals extracted from okra fibers in PVA nanocomposites. J Appl Polym Sci 128(5):3220–3230
Frangville C, Rutkevicius M, Richter AP, Velev OD, Stoyanov SD, Paunov VN (2012) Fabrication of environmentally biodegradable lignin nanoparticles. Chemphyschem 13:4235–4243
Fu GQ, Su LY, Yue PP, Huang YH, Bian J, Li MF, Peng F, Sun RC (2019) Syntheses of xylan stearate nanoparticles with loading function from by-products of viscose fiber mills. Cellulose 26:7195–7206
Gao A, Chen H, Tang J, Xie K, Hou A (2020) Efficient extraction of cellulose nanocrystals from waste Calotropis gigantea fiber by SO42-/TiO2 nano-solid superacid catalyst combined with ball milling exfoliation. Ind Crop Prod 152:112524
Gardner DJ, Han Y, Wang L (2015a) Forestry report wood–plastic composite. Technology 1:139–150
Gardner DJ, Han Y, Wang L (2015b) Wood–plastic composite technology. Curr For Rep 1:139–150
Ghalehno MD, Kord B, Sheshkal BN (2020) Mechanical and physical properties of wood/polyethylene composite reinforced with TiO2 nanoparticles. Cerne 26:474–481
Ghasemi S, Tajvidi M, Bousfield D, Gardner D, Gramlich W (2017) Dry-spun neat cellulose nanofibril filaments: influence of drying temperature and nanofibril structure on filament properties. Polymers 9:392
Ghofrani-Isfahani P, Baniamerian H, Tsapekos P, Alvarado-Morales M, Kasama T, Shahrokhi M et al (2020) Effect of metal oxide based TiO2 nanoparticles on anaerobic digestion process of lignocellulosic substrate. Energy 191:116580
Gîlcă IA, Popa VI (2013) Study on biocidal properties of some nanoparticles based on epoxy lignin. Cellul Chem Technol 47:239–245
Gîlca IA, Capraru AM, Grama S, Popa VI (2011) Agents for wood bioprotection based on natural aromatic compounds and their complexes with copper and zinc. Cellul Chem Technol 45:227
Gopakumar DA, Pai AR, Pottathara YB, Pasquini D, Carlos de Morais L, Luke M, Kalarikkal N, Grohens Y, Thomas S (2018) Cellulose nanofiber-based polyaniline flexible papers as sustainable microwave absorbers in the X-band. ACS Appl Mater Interfaces 10:20032–20043
Gopalan NK, Dufresne A (2003) Crab shell chitin whisker reinforced natural rubber nanocomposites. 1. Processing and swelling behavior. Biomacromolecules 4:657–665
Guan Y, Zhang B, Bian J, Peng F, Sun RC (2014a) Nanoreinforced hemicellulose-based hydrogels prepared by freeze–thaw treatment. Cellulose 21(3):1709–1721
Guan Y, Zhang B, Tan X, Qi XM, Bian J, Peng F, Sun RC (2014b) Organic–inorganic composite films based on modified hemicelluloses with clay nanoplatelets. ACS Sustain Chem Eng 2(7):1811–1818
Guo J, Cao R, Huang K, Xu Y (2020) Comparison of selective acidolysis of xylan and enzymatic hydrolysability of cellulose in various lignocellulosic materials by a novel xylonic acid catalysis method. Bioresour Technol 304:122943
Guz IA (2012) Continuum solid mechanics at nano-scale: how small can it go? J Nanomater Mol Nanotechnol 1:1
Haafiz KM, Taiwo OF, Razak N, Rokiah H, Hazwan HM, Rawi NFM, Khalil HA (2019) Development of green MMT-modified hemicelluloses based nanocomposite film with enhanced functional and barrier properties. Bioresources 14(4):8029–8047
Habibi Y, Lucia LA (2012) Polysaccharide building blocks: a sustainable approach to the development of renewable biomaterials. Wiley, Hoboken
Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals: chemistry, self-assembly, and applications. Chem Rev 110:3479–3500
Haghighi Poshtiri A, Taghiyari HR, Karimi AN (2013) The optimum level of nano-wollastonite consumption as a fire-retardant in poplar wood (Populus nigra). Int J Nano Dimens 4:141–151
Hakkarainen T, Koivuniemi R, Kosonen M, Escobedo-Lucea C, Sanz-Garcia A, Vuola J, Valtonen J, Tammela P, Mäkitie A, Luukko K et al (2016) Nanofibrillar cellulose wound dressing in skin graft donor site treatment. J Control Release 244:292–301
Hamada H, Bousfield D (2010) Nanofibrillated cellulose as a coating agent to improve print quality of synthetic fiber sheets. TAPPI J 9:25–29
Hänninen A, Sarlin E, Lyyra I, Salpavaara T, Kellomäki M, Tuukkanen S (2018) Nanocellulose and chitosan based films as low cost, green piezoelectric materials. Carbohydr Polym 202:418–424
Hassanin AH, Hamouda T, Candan Z, Kilic A, Akbulut T (2016) Developing high-performance hybrid green composites. Compos Part B 92:384–394
Hayle ST, Gonfa GG (2014) Synthesis, and characterization of titanium oxide nanomaterials using sol-gel method. Am J Nanosci Nanotechnol 2:1–7
He X, Deng H, Hwang H (2019a) The current application of nanotechnology in food and agriculture. J Food Drug Anal 27:1–21
He X, Luzi F, Hao X, Yang W, Torre L, Xiao Z et al (2019b) Thermal, antioxidant and swelling behaviour of transparent polyvinyl (alcohol) films in presence of hydrophobic citric acidmodified lignin nanoparticles. Int J Biol Macromol 127:665–676
Herrera MA, Mathew AP, Oksman K (2014) Gas permeability and selectivity of cellulose nanocrystals films (layers) deposited by spin coating. Carbohydr Polym 112:494–501
Hoeng F, Denneulin A, Bras J (2016) Use of nanocellulose in printed electronics: a review. Nanoscale 8:13131–13154
Hussin MH, Trache D, Chuin CTH, Fazita MN, Haafiz MM, Hossain MS (2019) Extraction of cellulose nanofibers and their eco-friendly polymer composites. In: Sustainable polymer composites and nanocomposites. Springer, Cham, pp 653–691
Iqbal HMN, Ahmed I, Zia MA, Irfan M (2011) Purification and characterization of the kinetic parameters of cellulase produced from wheat straw by Trichoderma viride under SSF and its detergent compatibility. Adv Biosci Biotechnol 2:149–156
Iqbal HMN, Kyazze G, Keshavarz T (2013) Advances in the valorization of lignocellulosic materials by biotechnology: an overview. Bioresources 8:3157–3176
Irawan C, Nata IF, Putra MD, Elma M, Hanisa KF (2017) Biocomposite materials of eleocharis dulcis fibers with iron (III) nanoparticles and its potential for Sasirangan textile wastewater treatment. Int J Adv Sci Eng Inf Technol 7(4):1234–1240
Ismaeilimoghadam S, Shamsian M, Bayat Kashkoli A, Kord B (2015) Evaluation of effect of nano SiO2 on the physical, mechanical and morphological properties of hybrid nanocomposite from polypropylene-wood flour. Iran J Wood Pap Sci Res (Persian) 30:266–277
Ismaeilimoghadam S, Masoudifar M, Nosrati B, Shamsian M (2016) Effects of inorganic nanoparticles on mechanical and morphological properties of wood flour-polypropylene nanocomposites. Drewno 59:127–137
Jabbour L, Gerbaldi C, Chaussy D, Zeno E, Bodoardo S, Beneventi D (2010) Microfibrillated cellulose–graphite nanocomposites for highly flexible paper-like Li-ion battery electrodes. J Mater Chem 20:7344
Jabbour L, Destro M, Chaussy D, Gerbaldi C, Penazzi N, Bodoardo S, Beneventi D (2013) Flexible cellulose/LiFePO4 paper-cathodes: toward eco-friendly all-paper Li-ion batteries. Cellulose 20:571–582
Jeong SS, Böckenfeld N, Balducci A, Winter M, Passerini S (2012) Natural cellulose as binder for lithium battery electrodes. J Power Sources 199:331–335
Jiang C, He H, Jiang H, Ma L, Jia DM (2013) Nano-lignin filled natural rubber composites: preparation and characterization. Express Polym Lett 7(5)
Jiang Y, Liu X, Yang Q, Song X, Qin C, Wang S, Li K (2019) Effects of residual lignin on composition, structure and properties of mechanically defibrillated cellulose fibrils and films. Cellulose 26:1577–1593
Jiang C, Bo J, Xiao X, Zhang S, Wang Z, Yan G et al (2020) Converting waste lignin into nanobiochar as a renewable substitute of carbon black for reinforcing styrene-butadiene rubber. Waste Manag 102:732–742
Ju T, Zhang Z, Li Y, Miao X, Ji J (2019) Continuous production of lignin nanoparticles using a microchannel reactor and its application in UV-shielding films. RSC Adv 9:24915–24921
Kabir AS, Yuan ZS, Kuboki T, Xu CC (2019) Development of lignin-based antioxidants for polymers. In: Production of materials from sustainable biomass resources. Springer, Singapore, pp 39–59
Kai D, Tan MJ, Chee PL, Chu YK, Yap YL, Loh XJ (2016) Towards lignin-based functional materials in a sustainable world. Green Chem 18:1175–1200
Karakuş K (2008) Üniversitemizdeki Polietilen ve Polipropilen atıkların Polimer Kompozit Üretiminde Değerlendirilmesi. Yüksek Lisans Tezi. Kahramanmaraş Sütçü İmam Üniversitesi Fen Bilimleri Enstitütüsü. Kahramanmaraş
Karakuş K, Aydemir D, Öztel A, Gunduz G, Mengeloglu F (2017) Nanoboron nitride-filled heat-treated wood polymer nanocomposites: comparison of different multicriteria decision-making models to predict optimum properties of the nanocomposites. J Compos Mater 51:4205–4218
Kargarzadeh H, Mariano M, Gopakumar D, Ahmad I, Thomas S, Dufresne A, Huang J, Lin N (2018) Advances in cellulose nanomaterials. Cellulose 25:2151–2189
Kaymakci A (2020) Effect of sepiolite clay nanofibers on physical, mechanical, and thermal properties of wood-plastic nanocomposites. J Thermoplast Compos Mater 0892705720939171
Kaymakcı A, Ayrılmış N (2014) Waste chestnut shell as a source of reinforcing fillers for polypropylene composites. J Thermoplast Compos Mater 27:1054–1064
Khalil HPSA, Davoudpour Y, Islam MN, Mustapha A, Sudesh K, Dungani R, Jawaid M (2014) Production and modification of nanofibrillated cellulose using various mechanical processes: a review. Carbohydr Polym 99:649–665
Khan RA, Beck S, Dussault D, Salmieri S, Bouchard J, Lacroix M (2013) Mechanical and barrier properties of nanocrystalline cellulose reinforced poly (caprolactone) composites: effect of gamma radiation. J Appl Polym Sci 129(5):3038–3046
Kim J, Cai Z, Chen Y (2010) Biocompatible bacterial cellulose composites for biomedical application. J Nanotechnol Eng Med 1:011006
Kim S, Fernandes MM, Matama T, Loureiro A, Gomes AC, Cavaco-Paulo A (2013) Chitosan–lignosulfonates sono-chemically prepared nanoparticles: characterisation and potential applications. Colloids Surf B Biointerfaces 103:1–8
Kim JH, Lee D, Lee YH, Chen W, Lee SY (2019) Nanocellulose for energy storage systems: beyond the limits of synthetic materials. Adv Mater 31:1804826
Klemm D, Fink HP et al (2005) Cellulose: fascinating biopolymer and sustainable raw material. Angew Chem Int Ed 44:3358–3393
Klemm D, Kramer F, Moritz S, Lindström T, Ankerfors M, Gray D, Dorris A (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed 50:5438–5466
Kojima Y, Ishino A, Kobori H, Suzuki S, Ito H, Makise R, Higuchi I, Okamoto M (2015) Reinforcement of wood flour board containing ligno-cellulose nanofiber made from recycled wood. J Wood Sci 61:492–499
Koo JH (2006) Polymer nanocomposites: processing, characterization, and applications. McGraw-Hill
Kord B, Taghizadeh Haratbar D (2016) Influence of fiber surface treatment on the physical and mechanical properties of wood flour-reinforced polypropylene bionanocomposites. J Thermoplast Compos Mater 29:979–992
Kumar S, Negi YS (2012) Corn cob xylan-based nanoparticles: Ester prodrug of 5-aminosalicylic acid for possible targeted delivery of drug. J Pharm Sci Res 4:1995–2003
Kumar P, Barrett DM, Delwiche MJ, Stroeve P (2009) Methods for pretreatment of lignocellulosic biomass for efficient hydrolysis and biofuel production. Ind Eng Chem Res 48:3713–3729
Kumar SU, Gopinath P, Negi YS (2017) Synthesis and bio-evaluation of xylan-5-fluorouracil-1-acetic acid conjugates as prodrugs for colon cancer treatment. Carbohydr Polym 157:1442–1450
Kumar SU, Kumar V, Priyadarshi R, Gopinath P, Negi YS (2018) pH-responsive prodrug nanoparticles based on xylan-curcumin conjugate for the efficient delivery of curcumin in cancer therapy. Carbohydr Polym 188:252–259
Kumar V, Kumar B, Deeba F, Bano S, Kulshreshtha A, Gopinath P, Negi YS (2019) Lipophilic 5-fluorouracil prodrug encapsulated xylan-stearic acid conjugates nanoparticles for colon cancer therapy. Int J Biol Macromol 128:204–213
Lalia BS, Samad YA, Hashaikeh R (2012) Nanocrystalline-cellulose-reinforced poly (vinylidenefluoride-co-hexafluoropropylene) nanocomposite films as a separator for lithium ion batteries. J Appl Polym Sci 126(S1):E442–E448
Lavoine N, Desloges I, Dufresne A, Bras J (2012) Microfibrillated cellulose—its barrier properties and applications in cellulosic materials: a review. Carbohydr Polym 90:735–764
Lee BR, Oh ES (2013) Effect of molecular weight and degree of substitution of a sodium-carboxymethyl cellulose binder on Li4Ti5O12 anodic performance. J Phys Chem C 117:4404–4409
Lee E, Song Y, Lee S (2019) Crosslinking of lignin/poly (vinyl alcohol) nanocomposite fiber webs and their antimicrobial and ultraviolet-protective properties. Text Res J 89:3–12
Leijonmarck S, Cornell A, Lindbergh G, Wågberg L (2013) Single-paper flexible Li-ion battery cells through a paper-making process based on nano-fibrillated cellulose. J Mater Chem A 1:4671–4677
Li D (2012) Nanostructuring materials towards conventionally unachievable combination of desired properties. J Nanomater Mol Nanotechnol 1:1
Li F, Ren S, Zhang W, Xu Z, Xie G, Chen Y, Peng L (2013a) Arabinose substitution degree in xylan positively affects lignocellulose enzymatic digestibility after various NaOH/H2SO4 pretreatments in Miscanthus. Bioresour Technol 130:629–637
Li Q, McGinnis S, Sydnor C, Wong A, Renneckar S (2013b) Nanocellulose life cycle assessment. ACS Sustain Chem Eng 1:919–928
Li J, Li D, Song Z, Shang S, Guo Y (2014a) Preparation and properties of wood plastic composite reinforced by ultralong cellulose nanofibers. Polym Compos 37:1206–1215
Li W, Guo R, Lan Y, Zhang Y, Xue W, Zhang Y (2014b) Preparation and properties of cellulose nanocrystals reinforced collagen composite films. J Biomed Mater Res A 102:1131–1139
Liang R, Zhao J, Li B, Cai P, Loh XJ, Xu C, Chen P, Kai D, Zheng L (2020) Implantable and degradable antioxidant poly (ε-caprolactone)-lignin nanofiber membrane for effective osteoarthritis treatment. Biomaterials 230:119601
Lievonen M, Valle-Delgado JJ, Mattinen ML, Hult EL, Lintinen K, Kostiainen MA, Paananen A, Szilvay GR, Osterberg M (2016) A simple process for lignin nanoparticle preparation. Green Chem 18:1416
Lin X, Zhao J, Wu M, Kuga Sh HY (2016) Green synthesis of gold, platinum and palladium nanoparticles by lignin and hemicellulose. J Microbiol Biotechnol 5(4):14–18
Lintinen K, Xiao Y, Ashok RB, Leskinen T, Sakarinen E, Sipponen M, Muhammad F, Oinas P, Österberg M, Kostiainen M (2018) Closed cycle production of concentrated and dry redispersible colloidal lignin particles with a three solvent polarity exchange method. Green Chem 20:843–850
Liu W, Du H, Zhang M, Liu K, Liu H, Xie H et al (2020) Bacterial cellulosebased composite scaffolds for biomedical applications: a review. ACS Sustain Chem Eng 8:7536–7562
Liu K, Du H, Zheng T, Liu H, Zhang M, Zhang R, Li H, Xie H, Zhang X, Ma M, Si C (2021) Recent advances in cellulose and its derivatives for oilfield applications. Carbohydr Polym 259:117740
Low LE, Teh KC, Siva SP, Chew IML, Mwangi WW, Chew CL, Goh B-H, Chan ES, Tey BT (2021) Lignin nanoparticles: the next green nanoreinforcer with wide opportunity. Environ Nanotechnol Monit Manag 15:100398
Ma J, Li D, Zhong L, Du F, Tan J, Yang J, Peng X (2018) Synthesis and characterization of biofunctional quaternized xylan-Fe2O3 core/shell nanocomposites and modification with polylysine and folic acid. Carbohydr Polym 199:382–389
Maeda H, Nakajima M, Hagiwara T, Sawaguchi T, Yano S (2006) Bacterial cellulose/silica hybrid fabricated by mimicking biocomposites. J Mater Sci 41:5646–5656
Malherbe S, Cloete TE (2002) Lignocellulose biodegradation: fundamentals and applications. Rev Environ Sci Biotechnol 1:105–114
Markstedt K, Mantas A, Tournier I, Martínez Ávila H, Hagg D, Gatenholm P (2015) 3D bioprinting human chondrocytes with nanocellulose–alginate bioink for cartilage tissue engineering applications. Biomacromolecules 16(5):1489–1496
Marutzky R (2004) Fifth global wood and natural fiber composites symposium, 27–28 April, Kassel
Mengeloğlu F, Çavuş V (2021) Long term natural weathering of PP based WPCs: the effect of TiO2 on selected color, physical, mechanical, morphological and chemical properties. In: Mavinkere Rangappa S, Parameswaranpillai J, Kumar MH, Siengchin S (eds) Wood polymer composites, Composites science and technology. Springer, Singapore
Mengeloglu F, Karakus K (2008) Polymer-composites from recyled high density polyethylene and waste lignocellulosic materials. Fresenius Environ Bull 17-211-217
Mertaniemi H, Escobedo-Lucea C, Sanz-Garcia A, Gandía C, Mäkitie A, Partanen J, Ikkala O, Yliperttula M (2016) Human stem cell decorated nanocellulose threads for biomedical applications. Biomaterials 82:208–220
Merzoug A, Bouhamida B, Sereir Z, Bezazi A, Kilic A, Candan Z (2020) Quasi-static and dynamic mechanical thermal performance of date palm/glass fiber hybrid composites. J Ind 51 (5_suppl):7599S–621S
Metreveli G, Wågberg L, Emmoth E, Belák S, Strømme M, Mihranyan AA (2014) A size-exclusion nanocellulose filter paper for virus removal. Adv Healthc Mater 3:1546–1550
Miao C, Hamad WY (2019) Critical insights into the reinforcement potential of cellulose nanocrystals in polymer nanocomposites. Curr Opin Solid State Mater Sci 23:100761
Mikkonen KS, Tenkanen M (2012) Sustainable food-packaging materials based on future biorefinery products: Xylans and mannans. Trends Food Sci Technol 28(2):90–102
Millon LE, Guhados G, Wan W (2008) Anisotropic polyvinyl alcohol—bacterial cellulose nanocomposite for biomedical applications. J Biomed Mater Res B Appl Biomater 86:444–452
Missoum K, Martoïa F, Belgacem MN, Bras J (2013) Effect of chemically modified nanofibrillated cellulose addition on the properties of fiber-based materials. Ind Crop Prod 48:98–105
Mo Y, Guo R, Liu J, Lan Y, Zhang Y, Xue W, Zhang Y (2015) Preparation and properties of PLGA nanofiber membranes reinforced with cellulose nanocrystals. Colloids Surf B Biointerfaces 132:177–184
Mohanty AK, Misra M, Drzal LT (2002) Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials world. J Polym Environ 10:19–26
Mokhena T, John M (2020) Cellulose nanomaterials: new generation materials for solving global issues. Cellulose 27:1149–1194
Mondal S (2018) Review on nanocellulose polymer nanocomposites. Polym-Plast Technol Eng 57:1377–1391
Montanari C, Olsén P, Berglund LA (2021) Sustainable wood nanotechnologies for wood composites processed by InSitu polymerization. Front Chem 9:682883
Moohan J, Stewart SA, Espinosa E, Rosal A, Rodríguez A, Larrañeta E et al (2020) Cellulose nanofibers and other biopolymers for biomedical applications. Rev Appl Sci 10:65
Moon RJ, Martini A, Nairn J, Simonsen J, Youngblood J (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40:3941–3994
Morrell JJ, Silva Guzman A (2006) Laboratory methods for assessing the resistance of wood plastic composites to fungal attack; IRG/WP/06-20340. Stockholm, International Research Group on Wood Protection
Ndiaye D, Verney V, Askanian H, Commereuc S, Tidjani A (2013) Morphology, thermal behavior and dynamic rheological properties of wood polypropylene composites. Mater Sci Appl 4:730–738
Nikmatin S, Syafiuddin A, Hong Kueh AB, Maddu A (2017) Physical, thermal, and mechanical properties of polypropylene composites filled with rattan nanoparticles. J Appl Res Technol 15:386–395
Nurani M, Akbari V, Taheri A (2017) Preparation and characterization of metformin surface modified cellulose nanofiber gel and evaluation of its anti-metastatic potentials. Carbohydr Polym 165:322–333
Olad A, Doustdar F, Gharekhani H (2020) Fabrication and characterization of a starch-based superabsorbent hydrogel composite reinforced with cellulose nanocrystals from potato peel waste. Colloids Surf Physicochem Eng Asp 601:124962
Oun AA, Shankar S, Rhim JW (2020) Multifunctional nanocellulose/metal and metal oxide nanoparticle hybrid nanomaterials. Crit Rev Food Sci Nutr 60(3):435–460
Oveissi F, Naficy S, Le TYL, Fletcher DF, Dehghani F (2018) Tough and processable hydrogels based on lignin and hydrophilic polyurethane. ACS Appl Bio Mater 1(6):2073–2081
Özmen N, Çetin NS, Narlıoğlu N, Çavuş V, Altuntaş E (2014) Utilisation of MDF waste for wood plastic composites production. SDÜ Fac For J 15:65–71
Park NM, Choi S, Oh JE, Hwang DY (2019) Facile extraction of cellulose nanocrystals. Carbohydr Polym 223:115114
Peng BL, Dhar N, Liu HL, Tam KC (2011) Chemistry and applications of nanocrystalline cellulose and its derivatives: a nanotechnology perspective. Can J Chem Eng 89(5):1191–1206
Pennells J, Godwin ID, Amiralian N, Martin DJ (2020) Trends in the production of cellulose nanofibers from non-wood sources. Cellulose 27:575–593
Peresin MS, Vesterinen AH, Habibi Y, Johansson LS, Pawlak JJ, Nevzorov AA, Rojas OJ (2014) Crosslinked PVA nanofibers reinforced with cellulose nanocrystals: water interactions and thermomechanical properties. J Appl Polym Sci 131(11)
Perez RF, Soares OS, de Farias AMD, Pereira MFR, Fraga MA (2018) Conversion of hemicellulose-derived pentoses over noble metal supported on 1D multiwalled carbon nanotubes. Appl Catal B Environ 232:101–107
Pervaiz S, Qureshi TA, Kashwani G, Kannan S (2021) 3D printing of fiber-reinforced plastic composites using fused deposition modeling: a status review. Materials (Basel) 14:4520
Phanthong P, Reubroycharoen P, Hao X, Xu G, Abudula A, Guan G (2018) Nanocellulose: extraction and application. Carbon Resour Convers 1:32–43
Pires JR, Souza VG, Fernando AL (2019) Valorization of energy crops as a source for nanocellulose production–current knowledge and future prospects. Ind Crop Prod 140:111642
Plackett D, Letchford K, Jackson J, Burt HA (2014) Review of nanocellulose as a novel vehicle for drug delivery. Nord Pulp Pap Res J 29:105–118
Popa VI, Capraru AM, Grama S, Malutan T (2011) Nanoparticles based on modified lignins with biocide properties. Cellul Chem Technol 45:221
Poyraz B, Tozluoglu A, Candan Z, Demir A (2017a) Matrix impact on the mechanical, thermal and electrical properties of microfluidized nanofibrillated cellulose composites. J Polym Eng 37(9):921–931
Poyraz B, Tozluoglu A, Candan Z, Demir A, Yavuz M (2017b) Influence of PVA and silica on chemical, thermo-mechanical and electrical properties of celluclast-treated nanofibrillated cellulose composites. Int J Biol Macromol 104:384–392
Poyraz B, Tozluoglu A, Candan Z, Demir A, Yavuz M, Buyuksari U, Unal HI, Fidan H, Saka RC (2018) TEMPO-treated CNF composites: pulp and matrix effect. Fibers Polym 19(1):195–204
Prasad V, Suresh D, Joseph MA, Sekar K, Ali M (2018) Development of flax fiber reinforced epoxy composite with nano TiO2 addition into the matrix to enhance mechanical properties. Mater Today Proc 5:11569–11575
Prasanna NS, Mitra J (2020) Isolation and characterization of cellulose nanocrystals from Cucumis sativus peels. Carbohydr Polym 247:116706
Principia Partners (2002) Natural & wood fiber composites. Principiam Newsl:1–1
Pua F, Fang Z, Zakaria S, Guo F, Chia C (2011) Direct production of biodiesel from high-acid value Jatropha oil with solid acid catalyst derived from lignin. Biotechnol Biofuels 4:56
Rajinipriya M, Nagalakshmaiah M, Robert M, Elkoun S (2018) Importance of agricultural and industrial waste in the field of nanocellulose and recent industrial developments of wood based nanocellulose: a review. ACS Sustain Chem Eng 6:2807–2828
Ramesh M, Rajeshkumar L, Sasikala G, Balaji D, Saravanakumar A, Bhuvaneswari V, Bhoopathi R (2022) A critical review on wood-based polymer composites: processing, properties, and prospects. Polymers 14:589
Rangan A, Manchiganti MV, Thilaividankan RM, Kestur SG, Menon R (2017) Novel method for the preparation of lignin-rich nanoparticles from lignocellulosic fibers. Ind Crop Prod 103:152–160
Raquez JM, Habibi Y, Murariu M, Dubois P (2013) Polylactide (PLA)-based nanocomposites. Prog Polym Sci 38:1504–1542
Rico-García D, Ruiz-Rubio L, Pérez-Alvarez L, Hernández-Olmos SL, Guerrero-Ramírez GL, Vilas-Vilela JL (2020) Lignin-based hydrogels: synthesis and applications. Polymers 12(1):81
Riedel U, Nickel J (2003) Seventh international conference on wood fiber-plastic composites, 19–20 May, Madison
Rojo E, Peresin MS, Sampson WW, Hoeger IC, Vartiainen J, Laine J, Rojas OJ (2015) Comprehensive elucidation of the effect of residual lignin on the physical, barrier, mechanical and surface properties of nanocellulose films. Green Chem 17:1853–1866
Rueda L, Saralegi A, Fernández-d’Arlas B, Zhou Q, Alonso-Varona A, Berglund LA, Mondragon I, Corcuera MA, Eceiza A (2013) In situ polymerization and characterization of elastomeric polyurethane-cellulose nanocrystal nanocomposites. Cell response evaluation. Cellulose 20(4):1819–1828
Saito T, Brown RH, Hunt MA, Pickel DL, Pickel JM, Messman JM et al (2012) Turning renewable resources into value-added polymer: development of lignin-based thermoplastic. Green Chem 14:3295–3303
Salami MA, Kaveian F, Rafienia M, Saber-Samandari S, Khandan A, Naeimi M (2017) Electrospun polycaprolactone/lignin-based nanocomposite as a novel tissue scaffold for biomedical applications. J Med Signals Sens 7(4):228
Salimi S, Sotudeh-Gharebagh R, Zarghami R, Chan SY, Yuen KH (2019) Production of nanocellulose and its applications in drug delivery: a critical review. ACS Sustain Chem Eng 7:15800–15827
Sanna R, Fortunati E, Alzari V, Nuvoli D, Terenzi A, Casula MF, Kenny JM, Mariani A (2013) Poly (N-vinylcaprolactam) nanocomposites containing nanocrystalline cellulose: a green approach to thermoresponsive hydrogels. Cellulose 20(5):2393–2402
Sarikaya M et al (2003) Molecular biomimetics: nanotechnology through biology. Nat Mater 2:577–585
Savov V, Antov P, Trichkov N (2021) Properties of high-density fiberboards bonded with urea-formaldehyde and phenol-formaldehyde resins. Innov Wood Ind Eng Des 2(20):17–26
Shah T, Gupta C, Ferebee RL, Bockstaller MR, Washburn NR (2015) Extraordinary toughening and strengthening effect in polymer nanocomposites using lignin-based fillers synthesized by ATRP. Polymer (Guildf) 72:406–412
Shojaeiarani J, Bajwa D, Shirzadifar A (2019) A review on cellulose nanocrystals as promising biocompounds for the synthesis of nanocomposite hydrogels. Carbohydr Polym 216:247–259
Sipponen MH, Henn A, Penttilä P, Österberg M (2020) Lignin-fatty acid hybrid nanocapsules for scalable thermal energy storage in phase-change materials. Chem Eng J 393:124711
Siró I, Plackett D (2010) Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17:459–494
Song J, Rojas OJ (2013) Paper chemistry: approaching super-hydrophobicity from cellulosic materials: a review. Nord Pulp Paper Res J 28(2):216–238
Sözen E, Zor M, Aydemir D (2018) The effect of nano TiO2 and nano boron nitride on mechanical, morphological, and thermal properties of WF/PP composites. Drvna Industrija 69:13–22
Stojanovska E, Kurtulus M, Abdelgawad A, Candan Z, Kilic A (2018) Developing lignin-based bio-nanofibers by centrifugal spinning technique. Int J Biol Macromol 113:98–105
Stojanovska E, Pampal ES, Kilic A, Quddus M, Candan Z (2019) Developing and characterization of lignin-based fibrous nanocarbon electrodes for energy storage devices. Compos Part B 158:239–249
Taghiyari HR (2014) Nanotechnology in wood and wood-composite materials. J Nanomater Mol Nanotechnol 3:1–2
Taghiyari HR, Hosseini SB, Ghahri S, Ghofrani M, Papadopoulos AN (2020a) Formaldehyde emission in micron-sized wollastonite-treated plywood bonded with soy flour and urea-formaldehyde resin. Appl Sci 10:6709
Taghiyari HR, Tajvidi M, Taghiyari R, Mantanis GI, Esmailpour A, Hosseinpourpia R (2020b) Nanotechnology for wood quality improvement and protection. In: Husen A, Jawaid M (eds) Nanomaterials for agriculture and forestry applications. Elsevier, Amsterdam, pp 469–489
Tajvidi M, Gardner DJ, Bousfield DW (2016) Cellulose nanomaterials as binders: laminate and particulate systems. J Renew Mater 4:365–376
Tarrés Q, Deltell A, Espinach FX, Pèlach MÀ, Delgado-Aguilar M, Mutjé P (2017) Magnetic bionanocomposites from cellulose nanofibers: fast, simple and effective production method. Int J Biol Macromol 99:29–36
Terrett OM, Dupree P (2019) Covalent interactions between lignin and hemicelluloses in plant secondary cell walls. Curr Opin Biotechnol 56:97–104
Tian D, Hu J, Bao J, Chandra RP, Saddler JN, Lu C (2017) Lignin valorization: lignin nanoparticles as high-value bio-additive for multifunctional nanocomposites. Biotechnol Biofuels 10:192
Tian D, Hu J, Chandra RP, Saddler JN, Lu C (2017a) Valorizing recalcitrant cellulolytic enzyme lignin via lignin nanoparticles fabrication in an integrated biorefinery. ACS Sustain Chem Eng 5:2702–2710
Tong X, Shen W, Chen X, Jia M, Roux JC (2020) Preparation and mechanism analysis of morphology-controlled cellulose nanocrystals via compound enzymatic hydrolysis of eucalyptus pulp. J Appl Polym Sci 137:48407
Tortora M, Cavalieri F, Mosesso P, Ciaffardini F, Melone F, Crestini C (2014) Ultrasound driven assembly of lignin into microcapsules for storage and delivery of hydrophobic molecules. Biomacromolecules 15:1634–1643
Tozluoglu A, Poyraz B, Candan Z, Yavuz M, Arslan R (2017) Biofilms from micro/nanocellulose of NaBH4-modified kraft pulp. Bull Mater Sci 40(4):699–710
Tozluoglu A, Poyraz B, Candan Z (2018a) Examining the efficiency of mechanic/enzymatic pretreatments in micro/nanofibrillated cellulose production. Maderas Cienc Tecnol 20(1):67–84
Tozluoglu A, Poyraz B, Mcdonald AG, Candan Z (2018b) Developing nanocellulose-based biofilms from kraft and NaBH4-modified kraft pulp. Cellul Chem Technol 52(3–4):223–237
Trache D, Hussin MH, Haafiz MM, Thakur VK (2017) Recent progress in cellulose nanocrystals: sources and production. Nanoscale 9:1763–1786
Trevisan H, Rezende CA (2020) Pure, stable and highly antioxidant lignin nanoparticles from elephant grass. Ind Crops Prod 145:112105
Turku I, Karki T (2014) Research progress in wood-plastic nanocomposites: a review. J Thermoplast Compos Mater 27:180–204
Wang Z, Xu C, Tammela P, Huo J, Strømme M, Edström K, Gustafsson T, Nyholm L (2015) Flexible freestanding Cladophora nanocellulose paper based Si anodes for lithium-ion batteries. J Mater Chem A 3:14109–14115
Wang S, Feng N, Zheng J, Yoon K, Lee D, Qu M et al (2016) Preparation of polyethylene/lignin nanocomposites from hollow spherical lignin- supported vanadium- based Ziegler–Natta journal pre-proof catalyst. Polym Adv Technol 27:1351–1354
Wang X, Song K, Ou R (2017) Effects of carbon black and titanium dioxide on ultraviolet weathering of wood flour-HDPE/lumber composites using multi-phase co-extrusion technology. Bioresources 12(3):6173–6186
Wang D, Xuan L, Han G, Wong AH, Wang Q, Cheng W (2019) Preparation and characterization of foamed wheat straw fiber/polypropylene composites based on modified nano-TiO2 particles. Compos Part A 128:1–10
Wang S, Yu S, Li J, Li S (2020) Effects of functionalized nanoTiO2 on the molecular motion in epoxy resin-based nanocomposites. Materials 13:1–10
Wang F, Ouyang D, Zhou Z, Page SJ, Liu D, Zhao X (2021) Lignocellulosic biomass as sustainable feedstock and materials for power generation and energy storage. J Energy Chem 57:247–280
Watanabe A (2012) History of wood plastics. Wood Ind 67:466–469
Weichelt F, Emmler R, Flyunt R, Beyer E, Buchmeiser MR, Beyer M (2010) ZnO-based UV nanocomposites for wood coatings in outdoor applications. Macromol Mater Eng 295:130–136
Wijaya CJ, Ismadji S, Gunawan S (2021) A review of lignocellulosic-derived nanoparticles for drug delivery applications: lignin nanoparticles, xylan nanoparticles, and cellulose nanocrystals. Molecules 26:676
Xiong F, Wu Y, Li G, Han Y, Chu F (2018) Transparent nanocomposite films of lignin nanospheres and poly (vinyl alcohol) for UV-absorbing. Ind Eng Chem Res 57:1207–1212
Xu T, Jiang Q, Ghim D, Liu KK, Sun H, Derami HG, Wang Z, Tadepalli S, Jun YS, Zhang Q (2018) Catalytically active bacterial nanocellulose-based ultrafiltration membrane. Small 14:1704006
Xu J, Xu JJ, Lin Q, Jiang L, Zhang D, Li Z, Ma B, Zhang C, Li L, Kai D, Yu HD, Loh XJ (2021) Lignin-incorporated nanogel serving as an antioxidant biomaterial for wound healing. ACS Appl Bio Mater 4:3–13
Yadav SM, Yusoh KB (2015) Mechanical and physical properties of wood-plastic composites made of polypropylene, wood flour and nanoclay. Int J Agric For Plantat 1:52–58
Yan Z, Song B, Fang G, Wu T, Chen N, Zhao M, Zou X, Liao G (2021) Bringing material concepts into conventional biorefineries: considerations of sources, preparations, and applications of lignin nanomaterials. ACS Sustain Chem Eng 9:10403–10423
Yang L, Zhang HY, Yang Q, Lu DN (2012) Bacterial cellulose–poly (vinyl alcohol) nanocomposite hydrogels prepared by chemical crosslinking. J Appl Polym Sci 126(S1):E245–E251
Yang W, Fortunati E, Dominici F, Kenny JM, Puglia D (2015a) Effect of processing conditions and lignin content on thermal, mechanical and degradative behavior of lignin nanoparticles/polylactic (acid) bionanocomposites prepared by melt extrusion and solvent casting. Eur Polym J 71:126–139
Yang W, Kenny JM, Puglia D (2015b) Structure and properties of biodegradable wheat gluten bionanocomposites containing lignin nanoparticles. Ind Crop Prod 74:348–356
Yang W, Fortunati E, Dominici F, Giovanale G, Mazzaglia A, Balestra GM et al (2016a) Synergic effect of cellulose and lignin nanostructures in PLA based systems for food antibacterial packaging. Eur Polym J 79:1–12
Yang W, Owczarek JS, Fortunati E, Kozanecki M, Mazzaglia A, Balestra GM, Kenny JM, Torre L, Puglia D (2016b) Antioxidant and antibacterial lignin nanoparticles in polyvinyl alcohol/chitosan films for active packaging. Ind Crop Prod 94:800–811
Yang W, Rallini M, Wang DY, Gao D, Dominici F, Torre L, Kenny JM, Puglia D (2018) Role of lignin nanoparticles in UV resistance, thermal and mechanical performance of PMMA nanocomposites prepared by a combined free-radical graft polymerization/masterbatch procedure. Compos Part A Appl Sci Manuf 107:61–69
Yiamsawas D, Baier G, Thines E, Landfester K, Wurm FR (2014) Biodegradable lignin nanocontainers. RSC Adv 4:11661–11663
Yildirim M, Candan Z (2021) Performance properties of particleboard panels modified with nanocellulose/boric acid. Bioresources 16:1
Yildirim M, Negawo TA, Kilic A, Candan Z (2020) Development and characterization of hybrid composites from sustainable green materials. Green Mater:1–10
Yildirim M, Candan Z, Gonultas O (2021) Chemical performance analysis of nanocellulose/boron compounds reinforced hybrid UF resin. Green Mater:1–8
Yoo HD, Kim D, Paek SH (2012) Plant cell wall polysaccharides as potential resources for the development of novel prebiotics. Biomol Ther 20(4):371
Younas M, Noreen A, Sharif A, Majeed A, Hassan A, Tabasum S et al (2019) A review on versatile applications of blends and composites of CNC with natural and synthetic polymers with mathematical modeling. Int J Biol Macromol 124:591–626
Yu Y, Jiang Z, Wang G, Song Y (2010) Growth of ZnO nanofilms on wood with photostability. Holzforschung 64:385–390
Yu J, Zhu Y, Ma H, Liu L, Hu Y, Xu J, Wang Z, Fan Y (2019) Contribution of hemicellulose to cellulose nanofiber-based nanocomposite films with enhanced strength, flexibility and UV-blocking properties. Cellulose 26(10):6023–6034
Zhang X, Liu W, Liu W, Qiu X (2020a) High performance PVA/lignin nanocomposite films with excellent water vapor barrier and UV-shielding properties. Int J Biol Macromol 142:551–558
Zhang X, Morits M, Jonkergouw C, Ora A, Valle-Delgado JJ, Farooq M, Ajdary R, Huan S, Linder M, Rojas O, Sipponen MH, Osterberg M (2020b) Threedimensional printed cell culture model based on spherical colloidal lignin particles and cellulose nanofibril-alginate hydrogel. Biomacromolecules 21(5):1875–1885
Zhao Y, Gao G, Liu D, Tian D, Zhu Y, Chang Y (2017) Vapor sensing with color-tunable multilayered coatings of cellulose nanocrystals. Carbohydr Polym 174:39–47
Zhao W, Simmons B, Singh S, Ragauskas A, Cheng G (2016) From lignin association to nano-/micro-particle preparation: extracting higher value of lignin. Green Chem 18(21):5693–5700
Zhong Y, Poloso T, Hetzer M, De Kee D (2007) Enhancement of wood/polyethylene composites via compatibilization and incorporation of organoclay particles. Polym Eng Sci 47:797–803
Zhou H, Li W, Hao X, Zong G, Yi X, Xu J, Ou R, Wang Q (2022) Recycling end-of-life WPC products into ultra-high-filled, high-performance wood fiber polyethylene composites a sustainable strategy for clean and cyclic processing in the WPC industry. J Mater Res Technol 18:1–14
Zhu H, Luo W, Ciesielski PN, Fang Z, Zhu JY, Henriksson G, Himmel ME, Hu L (2016) Wood-derived materials for green electronics, biological devices, and energy applications. Chem Rev 116:9305–9374
Zhu H, Fang Z, Preston C, Li Y, Hu L (2014) Transparent paper: fabrications, properties, and device applications. Energy Environ Sci 7(1):269–287
Zolin L, Destro M, Curtil D, Chaussy D, Penazzi N, Beneventi D, Gerbaldi C (2014) Flexible cellulose-based electrodes: towards eco-friendly all-paper batteries. Chem Eng Trans 41:361–366
Zor M, Tankut N, Gardner DJ, Yazici H (2016) Feasibility of using foamed styrene maleic anhydride (SMA) co-polymer in wood based composites. Drvna Industrija 67:399–407
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Zor, M. et al. (2023). Wood Plastic Composites (WPCs): Applications of Nanomaterials. In: Taghiyari, H.R., Morrell, J.J., Husen, A. (eds) Emerging Nanomaterials. Springer, Cham. https://doi.org/10.1007/978-3-031-17378-3_4
Download citation
DOI: https://doi.org/10.1007/978-3-031-17378-3_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-17377-6
Online ISBN: 978-3-031-17378-3
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)