Abstract
Nanomaterials generally exhibit drastically different properties compared to their bulk counter part having the same composition. The well-known dependence of the yield stress of materials on the grain size nanometric materials means that other mechanical proeperties are also significantly influnced by size. Much evidence indicates that the earlier assumptions are experimentally verified, namely, that at the initial stages low temperature (T < 300 K) annealed polycrystals plastically deform by grain boundary sliding on separate facets; actually GB microsliding, leading to stress concentration and generation of dislocations from areas where GB microsliding occurs.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
R.A. Andrievski, Rev. Adv. Mater. Sci. 21, 107 (2009)
R.J. Arsenault, N. Shi, Mater. Sci. Eng. A 81, 175 (1986)
M.F. Ashby, in Oxide Dispersion Strengthening, ed. by G.S. Ansell et al. (Gordon and Breach, New York, 1958), p. 143
J. Bailon, J. Corlot, Des Matériaux (Presses intérnationales Polytechnique, Montreal, 2000).
B. Chen, D. Penwell, M.B. Kruger, Solid State Commun. 115, 191 (2000)
B. Chen, D. Penwell, M.B. Kruger, J. Appl. Phys. 89, 9 (2001)
X.H. Chen, J. Lu, L. Lu, K. Lu, Scripta Mater. 52, 1039 (2005)
S. Cheng, E. Ma, Y.M. Wang, L.J. Kecskes, K.M. Youssef, C.C. Koch, U.P. Trociewitz, K. Han, Acta Mater. 53, 1521 (2005)
F. Dalla Torre, H. Van Swygenhoven, M. Victoria, Acta Materialia 50, 3957 (2002)
J.B. Ferguson, M. Tabandeh-Khorshid, P.K. Rohatgi, K. Cho, C.-S. Kim, Scripta Materialia 72–73, 13 (2014)
A. Fischer-Cripps, Nanoindentation 3rd edn. (Springer, New York, 2011)
I. Fujita, K. Edalati, X. Sauvage, Z. Horita, Scripta Mater. 152, 11 (2018)
H. Fujiwara, K. Ameyama, Mater. Sci. Forum 47, 304 (1999)
R. George, K.T. Kashyap, R. Rahul, S. Yamdagni, Scripta Mater. 53, 1159 (2005)
D.S. Gianola, S. Van Petegem, M. Legros, S. Brandstetter, H. Van Swygenhoven, K.J. Hemker, Acta Mater. 54, 2253 (2006)
J.G. Gigax, J.K. Baldwin, C.J. Sheehan, S.A. Maloy, N. Li, J. Mater. Res. 34, 1574 (2019)
T. Gladman, The Physical Metallurgy of Micoalloyed Steels, (Institue of Materials London, 1997)
Goodfellow, Alumina and alumina fibres-properties and applications-supplier’s data. AZO J. Mater. www.azom.com/details.Asp?Article ID-2103
D. Guo, S. Liu, Ceramics-Silikáty 60, 99 (2016)
D. Guo, G. Xie, J. Luo, J. Phys. D: Appl. Phys. 47, 013001 (2012)
N. Guo, B. Song, H. Yu, R. Xin, B. Wang, T. Liu, Mater. Des. 90, 545 (2016)
R. Halder, S. Sarkar, S. Bandyopadhyay, P.C. Chakraborti, J. Mater. Sci. 53, 8989 (2018)
J.S.C. Jang, C.C. Koch, Scripta Metall Mater. 24, 1599. (1990)
K.T. Kashyap, C. Ramachandra, C. Dutta, B. Chatterji, Null. Mater. Sci. 23, 47 (2000)
B.P. Kashyapm, K. Tangri, Acta Metall Mater. 43, 397 (1995)
D. Kim, K. Park, K. Kim, S. Cho, Y. Hirayama, K. Takagi, H. Kwon, Compos. Res. 32, 142 (2019)
F.C. Lang, Y.M. Xing, J. Zhu, Y.R. Zhao, Adv. Mater. Sci. Eng. 2016, 1 (2016)
M. Legros, B.R. Elliott, M.N. Rittner, J.R. Weertman, K.J. Hemker, Philos Mag. A 80, 1017 (2000)
L. Lu, Y. Shen, X. Chen, L. Qian, K. Lu, Science 304, 422 (2004)
V. Maier, K. Durst, J. Mueller, B. Backes, H.W. Höppel, M. Göken, Mater. Res. Soc. 26, 1421 (2011)
M.J. Mayo, W.D. Nix, Acta Metall. 36, 2183 (1988)
R. A. Mirshams, P. Parakala, Mater. Sci. Eng. A 372, 252 (2004)
R.G. Munro, J. Am. Ceram. Soc. 80, 1919 (1997)
G.W. Nieman, J.R. Weertman, R.W. Siegel, Nanostruct. Mater. 1, 185 (1992)
E. Orowan, Iternal stress in metals and alloys, The Unstitute of Metals, London, 451.
Z. Pakiela, M. Sus-Ryszkowska, A. Druzycka-Wiencek, K.J. Kurzydlowski, in Seventh International Conference on Nanostructured Materials, Germany, 20–24 June 2004
S. Panda, K. Dash, B.C. Ray, Bull. Mater. Sci. 37, 227 (2014a)
S. Panda, K. Dash, B.C. Ray, Bulletin. Mater. Sci. 37, 227 (2014b)
J. Park, Y.H. Sung, S. Son, J. Jun, D, Huh, H. Lee, Thin Solid Films, 660, 428 (2018)
J. Pelleg, Mechanical Properties of Materials (Springer, 2013)
J. Pelleg, Mechanical Properties of Ceramics (Springer, 2014)
D. Poirier, R.A.L. Drew, M.L. Trudeau, R. Gauvin, Mater. Sci. Eng. A 527, 7605 (2010)
A.A. Premnath, P.L. Varma, P.S. Sai RamaKrishna, P. Dheeraj, N.P. Karthik, Mater. Sci. Eng. 390, 012019 (2018)
N. Saheb, M.S. Khan, A.S. Hakeem, J. Nanomaterials 2015, 1 (2015)
P.G. Sanders, C.J. Youngdahl, J.R. Weertman, Mater Sci Eng A 77, 234 (1997a)
P.G. Sanders, J.A. Eastman, J.R. Weertman, Acta Mater 45, 4019 (1997b)
U.D. Sharma, M. Kumar, Phys. B 405, 2820 (2010)
M. Song, Mater. Sci. Eng. A 4343, 172 (2007)
I. Ucok, T. Ando, N.J. Grant, Mater. Sci. Eng., A 133, 284 (1991)
R. Vafaei, M.R. Toroghinejad, R. Pippan, Mater. Sci. Eng. A 536, 73 (2012)
A. Wagih, Trans. Indian Inst. Met. 69, 851 (2016)
A. Wagih, A. Fathy, Adv. Powder Technol. 27, 403 (2016)
J. Wang, Y.-H. Yu, S.C. Lee, Y.-W. Chung, Surf. Coat. Technol. 146–147, 189 (2001)
Y. Wang, M. Chen, F. Zhou, E. Ma, Nature 419, 912 (2002)
Y.M. Wang, K. Wang, D. Pan, K. Lu, K.J. Hemker, E. Ma, Scripta Mater. 48, 1581 (2003)
J. Ye, B.Q. Han, Z. Lee, B. Ahn, S.R. Nutt, J.M. Schoenung, Scripta Mater. 53, 481 (2005)
M. Zehetbauer, V. Seumer, Acta Metall 41, 577 (1993)
Z. Zhang, Q. Dong, B. Song, H. He, L. Chai, N. Guo, B. Wang, Z. Yao, Materials 12, 506 (2019)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Pelleg, J. (2021). Deformation in Nanomaterials. In: Mechanical Properties of Nanomaterials. Engineering Materials. Springer, Cham. https://doi.org/10.1007/978-3-030-74652-0_5
Download citation
DOI: https://doi.org/10.1007/978-3-030-74652-0_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-74651-3
Online ISBN: 978-3-030-74652-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)