Abstract
The strengthening of particulate reinforced metal-matrix composites is associated with a high dislocation density in the matrix due to the difference in coefficient of thermal expansion between the reinforcement and the matrix. While this is valid, the role of work hardening characteristics of the matrix alloys in strengthening of these composites is addressed in the present paper. It is found that commercial purity aluminium which has the lowest work hardening rate exhibits the highest strength increment. This effect is due to increased prismatic punching of dislocations. This relationship of decreasing work hardening rate associated with increasing prismatic punching of dislocations in the order 7075, 2014, 7010, 2024, 6061 and commercial purity aluminium leading to increased strength increments is noted.
Similar content being viewed by others
References
Arsenault R J and Fisher R M 1983Scr. Metall. 17 67
Arsenault R J and Shi N 1986Mater. Sci. Eng. 81 175
Arsenault R J, Wang L and Feng C K 1991Acta Metall. 39 47
Clyne T W and Withers P J 1993An introduction to metal matrix composites (UK: Cambridge University Press) p. 7
Marcus H L 1984 Microscopic study of the influence on interface bonding, Report no. UTSCMSE-84-1, University of Texas
Meyers M A and Chawla K K 1999Mechanical behaviour of materials (USA: Prentice Hall Inc.) p. 116
Nair S V, Tien J K and Bates R C 1985Int. Mater. Rev. 30 275
Vogelsang M, Fisher R M and Arsenault R J 1986Met. Trans. A17 379
Webster D 1982Met. Trans. A13 1511
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kashyap, K.T., Ramachandra, C., Dutta, C. et al. Role of work hardening characteristics of matrix alloys in the strengthening of metal matrix composites. Bull Mater Sci 23, 47–49 (2000). https://doi.org/10.1007/BF02708611
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02708611