Abstract
As long as the energy consumption is intended to be more economical and more environment friendly, electrochemical energy production is under serious consideration as an alternative energy/power source. Among different energy/power storage devices, lithium-ion batteries (LIBs) are currently the best commercially available devices. However, there are safety issues to be investigated even when it is operating at room temperature since there have been various incidents reported. From that point of view, effective research has been going on to develop LIBs that are viable to operate safely at higher temperatures. In the search for better cathode materials for LIBs, researchers have been investigating a new class of iron-based compounds called polyanions such as (SO4)2−, (PO4)3,− or (AsO4)3−. Orthorhombic LiFePO4 (LFP), which has an ordered olivine structure, has attracted particular interest due to its high-power capability, non-toxicity, and thermal stability. This material has relatively high theoretical capacity of 170 mAhg−1 when compared with other cathode materials. The major drawbacks of the lithium iron phosphate (LFP) cathode include its relatively low average potential, weak electronic conductivity, poor rate capability, low Li+-ion diffusion coefficient, and low volumetric specific capacity. Hence, this chapter clearly emphasizes the role and progress of LFP as efficient cathode material for LIBs and their ways to overcome the existing drawbacks which include the optimization of their synthesis methods, controlling the diffusion rate, and modification strategies. The use of conventional electrolytes with LFP caused iron dissolution on the cathode surface, which catalyzed the electrolyte decomposition, which then contributed to the formation of thick obstructive solid electrolyte interphase (SEI) films. Use of electrolyte additives is one of the most effective methods to protect against LiFePO4 dissolution. The thermal stability of these materials can be accounted by the high Li+ ion diffusion rate and the electron transfer activity. Even at elevated temperatures up to 340 °C, charged LFP and electrolyte didn’t show any kind of chemical reactions, which makes this material thermally more feasible than other cathode materials like LiCoO2, LiNiO2, and LiMn2O4.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Ajayan PM, Ebbesen TW (1992) Large-scale synthesis of carbon nanotubes. Nature 358:220–222. https://doi.org/10.1038/358220a0
Angela R, Islam H, Sari V et al (2017) Synthesis of LiFePO4/C composites based on natural iron stone using a sol gel method. AIP Conf Proc 1788:4–8. https://doi.org/10.1063/1.4968355
Bağcı C, Akyildiz O (2018) Synthesis, characterization and electrochemical performance of Nb doped LiFePO4/C cathodes. Hittite J Sci Eng 5:49–55. https://doi.org/10.17350/hjse19030000077
Ban C, Yin WJ, Tang H et al (2012) A novel codoping approach for enhancing the performance of liFePo 4 cathodes. Adv Energy Mater 2:1028–1032. https://doi.org/10.1002/aenm.201200085
Bao L, Xu G, Sun X et al (2017) Mono-dispersed LiFePO4@C core-shell [001] nanorods for a high power Li-ion battery cathode. J Alloys Compd 708:685–693. https://doi.org/10.1016/j.jallcom.2017.03.052
Benedek P, Wenzler N, Yarema M, Wood VC (2017) Low temperature hydrothermal synthesis of battery grade lithium iron phosphate. RSC Adv 7:17763–17767. https://doi.org/10.1039/c7ra00463j
Bi H, Huang F, Tang Y et al (2013a) Study of LiFePO4 cathode modified by graphene sheets for high-performance lithium ion batteries. Electrochim Acta 88:414–420. https://doi.org/10.1016/j.electacta.2012.10.050
Bi Z, Zhang X, He W et al (2013b) Recent advances in LiFePO4 nanoparticles with different morphology for high-performance lithium-ion batteries. RSC Adv 3:19744–19751
Blomgren GE (2017) The development and future of Lithium ion batteries. J Electrochem Soc 164:A5019–A5025. https://doi.org/10.1149/2.0251701jes
Cano ZP, Banham D, Ye S et al (2018) Batteries and fuel cells for emerging electric vehicle markets. Nat Energy 3:279–289. https://doi.org/10.1038/s41560-018-0108-1
Chem JM, Zhou X, Wang F, Liu Z (2011) Graphene modified LiFePO 4 cathode materials for high power lithium ion. J Mater Chem 21:3353–3358. https://doi.org/10.1039/c0jm03287e
Chen ZY, Zhu HL, Zhu W et al (2010) Electrochemical performance of carbon nanotube-modified LiFePO4 cathodes for Li-ion batteries. Trans Nonferrous Met Soc China. English Ed 20:614–618
Chen L, Zhang M, Wei W (2013) Graphene-based composites as cathode materials for Lithium ion batteries. J Nanomater 2013:8. https://doi.org/10.1155/2013/940389
Chen YT, Zhang HY, Chen YM et al (2018) Graphene-carbon nanotubes-modified LiFePO4 cathode materials for high-performance lithium-ion batteries. Mater Sci Forum 913:818–830. https://doi.org/10.4028/www.scientific.net/msf.913.818
Croce F, D’ Epifanio A, Hassoun J et al (2002) A novel concept for the synthesis of an improved LiFePO4 lithium battery cathode. Electrochem Solid-State Lett 5:A47. https://doi.org/10.1149/1.1449302
Cui Y, Zhao X, Guo R (2010) Enhanced electrochemical properties of LiFePO4 cathode material by CuO and carbon co-coating. J Alloys Compd 490:236–240. https://doi.org/10.1016/j.jallcom.2009.09.165
Delacourt C, Wurm C, Laffont L et al (2006) Electrochemical and electrical properties of Nb- and/or C-containing LiFePO4 composites. Solid State Ionics 177:333–341. https://doi.org/10.1016/j.ssi.2005.11.003
Dhindsa KS, Mandal BP, Bazzi K et al (2013a) Enhanced electrochemical performance of graphene modified LiFePO4 cathode material for lithium ion batteries. Solid State Ionics 253:94–100. https://doi.org/10.1016/j.ssi.2013.08.030
Dhindsa KS, Mandal BP, Bazzi K et al (2013b) Enhanced electrochemical performance of graphene modi fi ed LiFePO4 cathode material for lithium ion batteries. Solid State Ionics 253:94–100. https://doi.org/10.1016/j.ssi.2013.08.030
Ding Y, Jiang Y, Xu F et al (2010) Preparation of nano-structured LiFePO4/graphene composites by co-precipitation method. Electrochem Commun 12:10–13. https://doi.org/10.1016/j.elecom.2009.10.023
Feng W, Cao Y, Zhao X et al (2017) Effect of carbon nanotubes on the electrochemical performance of LiFePO4 particles in lithium ion batteries. Int J Electrochem Sci 12:5199–5207. https://doi.org/10.20964/2017.06.07
Fisher CAJ, Prieto VMH, Islam MS (2008) Lithium battery materials LiMPO4 (M = Mn, Fe, Co, and Ni): insights into defect association, transport mechanisms, and doping behavior. Chem Mater 20:5907–5915. https://doi.org/10.1021/cm801262x
Gariépy V, Vediappan K, JT C, Gagnon F, Barray P, Hovington A, Guerfi K, Zaghib A, Mauger CMJ (2012) Novel hydrothermal synthesis of Nano-LiFePO4 via solution steering. Electrochem Soc 152:2199
Goodenough JB (2018) How we made the Li-ion rechargeable battery. Nat Electron 1:204–204. https://doi.org/10.1038/s41928-018-0048-6
Ha SH, Lee YJ (2015) Core-shell LiFePO4/carbon-coated reduced graphene oxide hybrids for high-power lithium-ion battery cathodes. Chem A Eur J 21:2132–2138. https://doi.org/10.1002/chem.201404952
Herle PS, Ellis B, Coombs N, Nazar LF (2004) Nano-network electronic conduction in iron and nickel olivine phosphates. Nat Mater 3:147–152. https://doi.org/10.1038/nmat1063
Huang C, Ai D, Wang L, He X (2013) Rapid synthesis of LiFePO 4 by Coprecipitation. Chem Lett 42:1191–1193. https://doi.org/10.1246/cl.130436
Huang X, Du Y, Qu P et al (2017) Effect of carbon coating on the properties and electrochemical performance of LiFePO4/C composites by vacuum decomposition method. Int J Electrochem Sci 12:7183–7196. https://doi.org/10.20964/2017.08.77
Iijima S, Ajayan PM, Ichihashi T (1992) Growth model for carbon nanotubes. Phys Rev Lett 69:3100–3103. https://doi.org/10.1103/PhysRevLett.69.3100
Islam M, Yoon M, Min Y, Ur S (2015) Solid state synthesis of LiFePO4/C: using low cost materials. J Ceram Process Res 16:218–222. https://doi.org/JCPR16-2/_082013-034_218-222
Jabeen S, Kausar A, Muhammad B et al (2015) A review on polymeric Nanocomposites of Nanodiamond, carbon nanotube, and Nanobifiller: structure, preparation and properties. Polym Plast Technol Eng 54:1379–1409. https://doi.org/10.1080/03602559.2015.1021489
Jiang W, Wu M, Liu F et al (2017) Variation of carbon coatings on the electrochemical performance of LiFePO4 cathodes for lithium ionic batteries. RSC Adv 7:44296–44302. https://doi.org/10.1039/c7ra08062j
Jin B, Jin EM, Park KH, Gu HB (2008) Electrochemical properties of LiFePO4-multiwalled carbon nanotubes composite cathode materials for lithium polymer battery. Electrochem Commun 10:1537–1540. https://doi.org/10.1016/j.elecom.2008.08.001
Julien CM (2017) Lithium Iron phosphate: olivine material for high power Li-ion batteries. Res Dev Mater Sci 2:3–6. https://doi.org/10.31031/rdms.2017.02.000545
Kashi R, Khosravi M, Mollazadeh M (2018) Effect of carbon precursor on electrochemical performance of LiFePO4-C nano composite synthesized by ultrasonic spray pyrolysis as cathode active material for Li ion battery. Mater Chem Phys 203:319–332. https://doi.org/10.1016/j.matchemphys.2017.10.021
Kim HJ, Bae GH, Lee SM et al (2019) Properties of lithium iron phosphate prepared by biomass-derived carbon coating for flexible lithium ion batteries. Electrochim Acta 300:18–25. https://doi.org/10.1016/j.electacta.2019.01.057
Konarova M, Taniguchi I (2008) Preparation of LiFePO4/C composite powders by ultrasonic spray pyrolysis followed by heat treatment and their electrochemical properties. Mater Res Bull 43:3305–3317. https://doi.org/10.1016/j.materresbull.2008.02.014
Kroto HW, Heath JR, O’Brien SC, Curl RF, Smalley RE (1985) C60: Buckminsterfullerene. Nature 318:162–163. https://doi.org/10.1038/318162a0
Landi BJ, Ganter MJ, Cress CD et al (2009) Carbon nanotubes for lithium ion batteries. Energy Environ Sci 2:638–654. https://doi.org/10.1039/b904116h
Lei X, Zhang H, Chen Y, Wang W, Huang Z (2014) Hydrothermal synthesis and electrochemical performance of LiFePO 4 graphene composites for lithium-ion batteries. Adv Mater Res 900:242–246. https://doi.org/10.4028/www.scientific.net/AMR.900.242
Li H, Zhou H (2012) Enhancing the performances of Li-ion batteries by carbon-coating: present and future. Chem Commun 48:1201–1217. https://doi.org/10.1039/c1cc14764a
Li X, Kang F, Bai X, Shen W (2007) A novel network composite cathode of LiFePO4/multiwalled carbon nanotubes with high rate capability for lithium ion batteries. Electrochem Commun 9:663–666. https://doi.org/10.1016/j.elecom.2006.10.050
Li L, Li X, Wang Z et al (2009) Stable cycle-life properties of Ti-doped LiFePO4 compounds synthesized by co-precipitation and normal temperature reduction method. J Phys Chem Solids 70:238–242. https://doi.org/10.1016/j.jpcs.2008.10.012
Li YD, Zhao SX, Nan CW, Li BH (2011) Electrochemical performance of SiO2-coated LiFePO4 cathode materials for lithium ion battery. J Alloys Compd 509:957–960. https://doi.org/10.1016/j.jallcom.2010.08.154
Lin HY, Yeh SM, Chen JS (2014) Physical and electrochemical properties of LiFePO4/C nanofibers synthesized by electrospinning. Int J Electrochem Sci 9:6936–6948
Liu Z, Huang X, Wang D (2008) First-principle investigations of N doping in LiFePO4. Solid State Commun 147:505–509. https://doi.org/10.1016/j.ssc.2008.06.013
Liu Y, Cao C, Li J (2010) Enhanced electrochemical performance of carbon nanospheres-LiFePO4 composite by PEG based sol-gel synthesis. Electrochim Acta 55:3921–3926. https://doi.org/10.1016/j.electacta.2010.02.032
Liu Y, Liu J, Wang J et al (2018) Formation of size-dependent and conductive phase on lithium iron phosphate during carbon coating. Nat Commun 9:1–8. https://doi.org/10.1038/s41467-018-03324-7
Lu L, Han X, Li J et al (2013) A review on the key issues for lithium-ion battery management in electric vehicles. J Power Sources 226:272–288. https://doi.org/10.1016/j.jpowsour.2012.10.060
Lung-Hao Hu B, Wu FY, Lin CT et al (2013) Graphene-modified LiFePO4 cathode for lithium ion battery beyond theoretical capacity. Nat Commun 4:1687. https://doi.org/10.1038/ncomms2705
Ma Y, Li X, Sun S et al (2013) Synthesize of graphene-LiFePO4 composite porous microsphere with the enhanced rate performance. Int J Electrochem Sci 8:2842–2848
Magasinski A, Dixon P, Hertzberg B et al (2010) High-performance lithium-ion anodes using a hierarchical bottom-up approach. Nat Mater 9:353–358. https://doi.org/10.1038/nmat2725
Mao S, Pu H, Chen J (2012) Graphene oxide and its reduction: modeling and experimental progress. RSC Adv 2:2643–2662. https://doi.org/10.1039/c2ra00663d
May GJ, Davidson A, Monahov B (2018) Lead batteries for utility energy storage: a review. J Energy Storage 15:145–157. https://doi.org/10.1016/j.est.2017.11.008
Mizushima K, Jones PC, Wiseman PJ, Goodenough JB (1981) LixCoO2 (0<x≤1): a new cathode material for batteries of high energy density. Solid State Ionics 3–4:171–174. https://doi.org/10.1016/0167-2738(81)90077-1
Molenda J, Kulka A, Milewska A et al (2013) Structural, transport and electrochemical properties of liFePO4 substituted in lithium and iron sublattices (Al, Zr, W, Mn, Co and Ni). Materials (Basel) 6:1656–1687. https://doi.org/10.3390/ma6051656
Nan C, Lu J, Li L et al (2013) Size and shape control of LiFePO 4 nanocrystals for better lithium ion battery cathode materials. Nano Res 6:469–477. https://doi.org/10.1007/s12274-013-0324-8
Naoki N, Feixiang W, Tae LJ, Gleb Y (2015) A new cathode material for batteries of high-energy density. Mater Today 18:252–264. https://doi.org/10.1016/j.mattod.2014.10.040
Nishimura SI, Nakamura M, Natsui R, Yamada A (2010) New lithium iron pyrophosphate as 3.5 V class cathode material for lithium ion battery. J Am Chem Soc 132:13596–13597. https://doi.org/10.1021/ja106297a
Okada K, Kimura I, Machida K (2018) High rate capability by sulfur-doping into LiFePO4 matrix. RSC Adv 8:5848–5853. https://doi.org/10.1039/c7ra12740e
Padhi AK (1997) Phospho-olivines as positive-electrode materials for rechargeable Lithium batteries. J Electrochem Soc 144:1188. https://doi.org/10.1149/1.1837571
Papageorgiou DG, Kinloch IA, Young RJ (2017) Mechanical properties of graphene and graphene-based nanocomposites. Prog Mater Sci 90:75–127. https://doi.org/10.1016/j.pmatsci.2017.07.004
Park KS, Son JT, Chung HT et al (2003) Synthesis of LiFePO 4 by co-precipitation and microwave heating. Electrochem Commun 5:839–842. https://doi.org/10.1016/j.elecom.2003.08.005
Park KS, Xiao P, Kim SY et al (2012) Enhanced charge-transfer kinetics by anion surface modification of LiFePO4. Chem Mater 24:3212–3218. https://doi.org/10.1021/cm301569m
Qiao YQ, Feng WL, Li J, Shen TD (2017) Ultralong cycling stability of carbon-nanotube/LiFePO4 nanocomposites as electrode materials for lithium-ion batteries. Electrochim Acta 232:323–331. https://doi.org/10.1016/j.electacta.2017.02.161
Qin X, Wang X, Xiang H et al (2010) Mechanism for hydrothermal synthesis of LiFePO4 platelets as cathode material for lithium-ion batteries. J Phys Chem C 114:16806–16812. https://doi.org/10.1021/jp104466e
Qin G, Ma Q, Wang C (2014a) A porous C/LiFePO4/multiwalled carbon nanotubes cathode material for lithium ion batteries. Electrochim Acta 115:407–415. https://doi.org/10.1016/j.electacta.2013.10.177
Qin G, Wu Q, Zhao J et al (2014b) C/LiFePO4/multi-walled carbon nanotube cathode material with enhanced electrochemical performance for lithium-ion batteries. J Power Sources 248:588–595. https://doi.org/10.1016/j.jpowsour.2013.06.070
Qiu Y, Geng Y, Li N et al (2014a) Nonstoichiometric LiFePO4/C nano fibers by electrospinning as cathode materials for lithium-ion battery. Maters Chem Phys 144:226–229. https://doi.org/10.1016/j.matchemphys.2013.12.027
Qiu Y, Geng Y, Li N et al (2014b) Nonstoichiometric LiFePO4/C nanofibers by electrospinning as cathode materials for lithium-ion battery. Mater Chem Phys 144:226–229. https://doi.org/10.1016/j.matchemphys.2013.12.027
Rao MC (2015) Novel cathode materials for rechargeable batteries. Int J Sci Res 172:637–671. https://doi.org/10.1007/978-3-319-15458-9_23
Ruska M, Kiviluoma J (2011) Challenges in the development of advanced Liion batteries: a review. Energy Environ Sci:1–72. https://doi.org/10.1039/c1ee01598b
Salem JR, de Vries MS, Bethune DS et al (2003) Atoms in carbon cages: the structure and properties of endohedral fullerenes. Nature 366:123–128. https://doi.org/10.1038/366123a0
Saroha R, Panwar AK (2017) Effect of in situ pyrolysis of acetylene (C2H2) gas as a carbon source on the electrochemical performance of LiFePO4 for rechargeable lithium-ion batteries. J Phys D Appl Phys 50. https://doi.org/10.1088/1361-6463/aa708c
Saw LH, Somasundaram K, Ye Y, Tay AAO (2014) Electro-thermal analysis of Lithium Iron Phosphate battery for electric vehicles. J Power Sources 249:231–238. https://doi.org/10.1016/j.jpowsour.2013.10.052
Seo J, Sankarasubramanian S, Kim CS et al (2015) Thermal characterization of Li/sulfur, Li/S-LiFePO4 and Li/S-LiV3O8 cells using isothermal micro-calorimetry and accelerating rate calorimetry. J Power Sources 289:1–7. https://doi.org/10.1016/j.jpowsour.2015.04.149
Shao D, Wang J, Dong X et al (2013) Electrospinning fabrication and electrochemical properties of LiFePO4/C composite nanofibers. J Mater Sci Mater Electron 24:4263–4269. https://doi.org/10.1007/s10854-013-1395-8
Su FY, You C, He YB et al (2010) Flexible and planar graphene conductive additives for lithium-ion batteries. J Mater Chem 20:9644–9650. https://doi.org/10.1039/c0jm01633k
Susantyoko RA, Karam Z, Alkhoori S et al (2017) A surface-engineered tape-casting fabrication technique toward the commercialisation of freestanding carbon nanotube sheets. J Mater Chem A 5:19255–19266. https://doi.org/10.1039/c7ta04999d
Susantyoko RA, Alkindi TS, Kanagaraj AB et al (2018) Performance optimization of freestanding MWCNT-LiFePO4 sheets as cathodes for improved specific capacity of lithium-ion batteries. RSC Adv 8:16566–16573. https://doi.org/10.1039/c8ra01461b
Swain P, Viji M, Mocherla PSV, Sudakar C (2015) Carbon coating on the current collector and LiFePO4 nanoparticles – influence of sp2 and sp3-like disordered carbon on the electrochemical properties. J Power Sources 293:613–625. https://doi.org/10.1016/j.jpowsour.2015.05.110
Świder J, Świętosławski M, Molenda M, Dziembaj R (2014) A novel concept for the synthesis of nanometric LiFePO4 by co-precipitation method in an anhydrous environment. Procedia Eng 98:36–41. https://doi.org/10.1016/j.proeng.2014.12.484
Takahashi M, Tobishima S, Takei K, Sakurai Y (2002) Reaction behavior of LiFePO4 as a cathode material for rechargeable lithium batteries. Solid State Ionics 148:283–289. https://doi.org/10.1016/S0167-2738(02)00064-4
Tan L, Tang Q, Chen X et al (2014) Mesoporous LiFePO4 microspheres embedded homogeneously with 3D CNT conductive networks for enhanced electrochemical performance. Electrochim Acta 137:344–351. https://doi.org/10.1016/j.electacta.2014.06.015
Tang Y, Huang F, Bi H et al (2012) Highly conductive three-dimensional graphene for enhancing the rate performance of LiFePO4 cathode. J Power Sources 203:130–134. https://doi.org/10.1016/j.jpowsour.2011.12.011
Thanh L, Huynh N, Thuy T et al (2018) Carbon – coated LiFePO4– carbon nanotube electrodes for high-rate Li-ion battery. J Solid State Electrochem 22:2247–2254. https://doi.org/10.1007/s10008-018-3934-y
Thostenson ET, Ren Z, Chou T (2001) Advances in the science and technology of carbon nanotubes and their composites: a review. Compos Sci Technol 61:1899–1912. https://doi.org/10.1016/S0266-3538(01)00094-X
Tian R, Liu H, Jiang Y et al (2015) Drastically enhanced high-rate performance of carbon-coated LiFePO4 nanorods using a green chemical vapor deposition (CVD) method for lithium ion battery: a selective carbon coating process. ACS Appl Mater Interfaces 7:11377–11386. https://doi.org/10.1021/acsami.5b01891
Toprakci O, Toprakci HAK, Ji L et al (2012) Carbon nanotube-loaded electrospun LiFePO4carbon composite nanofibers as stable and binder-free cathodes for rechargeable lithium-ion batteries. ACS Appl Mater Interfaces 4:1273–1280. https://doi.org/10.1021/am201527r
Varzi A, Bresser D, Von Zamory J et al (2014) ZnFe2O4-C/LiFePO4-CNT: a novel high-power lithium-ion battery with excellent cycling performance. Adv Energy Mater 4. https://doi.org/10.1002/aenm.201400054
Wang L, Wang H, Liu Z et al (2010) A facile method of preparing mixed conducting LiFePO4/graphene composites for lithium-ion batteries. Solid State Ionics 181:1685–1689. https://doi.org/10.1016/j.ssi.2010.09.056
Wang Y, Liu Z, Zhou S (2011) An effective method for preparing uniform carbon coated nano-sized LiFePO 4 particles. Electrochim Acta 58:359–363. https://doi.org/10.1016/j.electacta.2011.09.053
Wang Y, Feng ZS, Chen JJ, Zhang C (2012) Synthesis and electrochemical performance of LiFePO4/graphene composites by solid-state reaction. Mater Lett 71:54–56. https://doi.org/10.1016/j.matlet.2011.12.034
Wang S, Yang H, Feng L et al (2013) A simple and inexpensive synthesis route for LiFePO 4/C nanoparticles by co-precipitation. J Power Sources 233:43–46. https://doi.org/10.1016/j.jpowsour.2013.01.124
Wang B, Abdulla WA, Wang D, Zhao XS (2015a) Three-dimensional porous LiFePO4 cathode material modified with nitrogen-doped graphene aerogel for high-power lithium ion batteries. Energy Environ Sci 8:869–875. https://doi.org/10.1039/b000000x
Wang Y, Lv L, Wang J et al (2015b) Influence of microstructure on electrochemical properties of Si/C multilayer thin-film anodes deposited using a sputtering method. Mater Lett 160:210–212. https://doi.org/10.1016/j.matlet.2015.07.084
Wang B, Liu T, Liu A et al (2016) A hierarchical porous C@LiFePO4/carbon nanotubes microsphere composite for high-rate lithium-ion batteries: combined experimental and theoretical study. Adv Energy Mater 6:1600426. https://doi.org/10.1002/aenm.201600426
Wang X, Feng Z, Huang J et al (2018) Graphene-decorated carbon-coated LiFePO4 nanospheres as a high-performance cathode material for lithium-ion batteries. Carbon N Y 127:149–157. https://doi.org/10.1016/j.carbon.2017.10.101
Whittingham MS (2012) History, evolution, and future status of energy storage. Proc IEEE 100:1518–1534. https://doi.org/10.1109/JPROC.2012.2190170
Whittingham MS (2014) Ultimate limits to intercalation reactions for Lithium batteries. Chem Rev 114:11414–11443. https://doi.org/10.1021/cr5003003
Whittingham MS, Gamble FR (1975) The lithium intercalates of the transition metal dichalcogenides. Mater Res Bull 10:363–371. https://doi.org/10.1016/0025-5408(75)90006-9
Wu ZS, Zhou G, Yin LC et al (2012) Graphene/metal oxide composite electrode materials for energy storage. Nano Energy 1:107–131. https://doi.org/10.1016/j.nanoen.2011.11.001
Wu G, Zhou Y, Shao Z (2013a) Carbon nanotube and graphene nanosheet co-modified LiFePO4 nanoplate composite cathode material by a facile polyol process. Appl Surf Sci 283:999–1005. https://doi.org/10.1016/j.apsusc.2013.07.059
Wu XL, Guo YG, Su J et al (2013b) Carbonnanotube decorated nano-LiFePO4 @c cathode material with superior high-rate and low-temperature performances for lithium-ion batteries. Adv Energy Mater 3:1155–1160. https://doi.org/10.1002/aenm.201300159
Wu XL, Guo YG, Su J et al (2013c) Carbon-nanotube-decorated nano-LiFePO4@C cathode material with superior high-rate and low-temperature performances for lithium-ion batteries. Adv Energy Mater 3:1155–1160. https://doi.org/10.1002/aenm.201300159
Xiang JY, Tu JP, Zhang L et al (2010) Improved electrochemical performances of 9LiFePO4·Li3V2(PO4)/C composite prepared by a simple solid-state method. J Power Sources 195:8331–8335. https://doi.org/10.1016/j.jpowsour.2010.06.070
Xu Z, Xu L, Lai Q, Ji X (2007) A PEG assisted sol-gel synthesis of LiFePO4 as cathodic material for lithium ion cells. Mater Res Bull 42:883–891. https://doi.org/10.1016/j.materresbull.2006.08.018
Xu D, Wang P, Shen B (2016) Synthesis and characterization of sulfur-doped carbon decorated LiFePO4 nanocomposite as high performance cathode material for lithium-ion batteries. Ceram Int 42:5331–5338. https://doi.org/10.1016/j.ceramint.2015.12.064
Yang J, Xu JJ (2004) Nonaqueous sol-gel synthesis of high-performance LiFePO[sub 4]. Electrochem Solid-State Lett 7:A515. https://doi.org/10.1149/1.1819893
Yang S, Song Y, Zavalij PY, Stanley Whittingham M (2002) Reactivity, stability and electrochemical behavior of lithium iron phosphates. Electrochem Commun 4:239–244. https://doi.org/10.1016/S1388-2481(01)00298-3
Yang MR, Teng TH, Wu SH (2006) LiFePO4/carbon cathode materials prepared by ultrasonic spray pyrolysis. J Power Sources 159:307–311. https://doi.org/10.1016/j.jpowsour.2006.04.113
Yang J, Wang J, Wang D et al (2012) 3D porous LiFePO4 graphene hybrid cathodes with enhanced performance for Li-ion batteries. J Power Sources 208:340–344. https://doi.org/10.1016/j.jpowsour.2012.02.032
Yang J, Wang J, Tang Y, Wang D, Li X, Hu Y, Li R, Liang G, Shamb T-K, Sun X (2013) LiFePO4–graphene as a superior cathode material for rechargeable lithium batteries: impact of stacked graphene and unfolded graphene. Energy Environ Sci 6:1521–1528. https://doi.org/10.1039/C3EE24163G
Yang CC, Jang JH, Jiang JR (2015) Preparation of carbon and oxide co-modified LiFePO4 cathode material for high performance lithium-ion battery. Mater Chem Phys 165:196–206. https://doi.org/10.1016/j.matchemphys.2015.09.018
Yu T, Wang Z, Fu Y et al (2016) Sulfur substituted LiFePO4/C with improved rate performance for lithium ion batteries. Int J Electrochem Sci 11:5999–6008. https://doi.org/10.20964/2016.07.47
Zhang Y, Wang W, Li P et al (2012) A simple solvothermal route to synthesize graphene-modified LiFePO4 cathode for high power lithium ion batteries. J Power Sources 210:47–53. https://doi.org/10.1016/j.jpowsour.2012.03.007
Zhao Y, Li J, Dahn JR (2017) Interdiffusion of Cations from metal oxide surface coatings into LiCoO2 during sintering. Chem Mater 29:5239–5248. https://doi.org/10.1021/acs.chemmater.7b01219
Zhu J, Yoo K, El-Halees I, Kisailus D (2014) Solution deposition of thin carbon coatings on LiFePO 4. ACS Appl Mater Interfaces 6:21550–21557. https://doi.org/10.1021/am506498p
Zou B, Wang Y, Zhou S (2013) Spray drying-assisted synthesis of LiFePO4/C composite microspheres with high performance for lithium-ion batteries. Mater Lett 92:300–303. https://doi.org/10.1016/j.matlet.2012.10.111
Acknowledgments
Author Dr. Jabeen Fatima M. J. would like to acknowledge the Kerala State Council for Science, Technology and Environment (KSCSTE) for financial assistance as post-doctoral research fellowship.
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive licence to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Balakrishnan, N.T.M. et al. (2021). Lithium Iron Phosphate (LiFePO4) as High-Performance Cathode Material for Lithium Ion Batteries. In: Rajendran, S., Karimi-Maleh, H., Qin, J., Lichtfouse, E. (eds) Metal, Metal-Oxides and Metal Sulfides for Batteries, Fuel Cells, Solar Cells, Photocatalysis and Health Sensors. Environmental Chemistry for a Sustainable World, vol 62. Springer, Cham. https://doi.org/10.1007/978-3-030-63791-0_2
Download citation
DOI: https://doi.org/10.1007/978-3-030-63791-0_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-63790-3
Online ISBN: 978-3-030-63791-0
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)