Abstract
Wearable technology plays a significant role in improving the quality of life for people, especially individuals who deal with the issue of aging and disability. Despite the advantages, there are some barriers that cause these users to reject or abandon their wearable devices. In the design of these devices, the literature suggests that little attention has been given to the psychological and social needs of the users. However, some researchers are exploring various strategies to design inclusive wearables and minimize the stigma associated with assistive wearables. This paper provides a literature review of the current approaches and frameworks related to wearable technology, with a qualitative focus on the discourse about the design of emotionally engaging and meaningful products. It suggests that there is an opportunity in the area of assistive technology to design inclusive wearables that not only alleviate the stigma attached to the devices, but also lead to the creation of long-term product attachment.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bush, P.: The craft of wearable wellbeing. In: Proceedings of the Third European Conference on Design4Health 2015, Sheffield, UK, Sheffield Hallam University (2015)
Bush, P., ten Hompel, S.: An integrated craft and design approach for wearable orthoses. Des. Health 1(1), 86–104 (2017)
Bowlby, J.: The Making and Breaking of Affectional Bonds. Tavistock Publications, London (1979)
Brickfield, C.F.: Attitudes and perceptions of older people toward technology. In: Robinson, K., Livingston, J., Birren, J.E., Regnier, V.A., Small, A.M., Sterns, H.L. (eds.) Aging and Technological Advances, pp. 31–38. Springer, NewYork (1984)
BSI TBSI: Design management systems. Managing inclusive design. Guide BS 7000-6:2005 (2005)
Buenaflor, C., Kim, H.: Six human factors to acceptability of wearable computers. Int. J. Multimed. Ubiquitous Eng. 8(3), 103–113 (2013)
Carpi, F., De Rossi, D.: Electroactive polymer-based devices for e-textiles in biomedicine. IEEE Trans. Inform. Technol. Biomed. 9(3), 295–318 (2005)
Casais, M., et al.: Using symbolic meaning as a means to design for happiness: the development of a card set for designers. In: Proceedings of the 50th Anniversary Conference on Design Research Society. (DRS 2016), Brighton, UK, June 2016
Casais, M., et al.: Symbolic meaning attribution as a means to design for happiness. In: Proceedings of the Tenth International Conference on Design and Emotion - Celebration and Contemplation 2015 (2016)
Cassim, J.: Issues and techniques in the inclusive design of apparel for the active ageing population. In: McCann, J., Bryson, D. (eds.) Textile-Led Design for the Active Ageing Population, pp. 283–305. Woodhead Publishing, Cambridge (2015)
Chatterjee, A., Aceves, A., Dungca, R., Flores, H., Giddens, K.: Classification of wearable computing: a survey of electronic assistive technology and future design. In: 2016 Second International Conference on Research in Computational Intelligence and Communication Networks (ICRCICN), pp. 22–27. IEEE, September 2016
Clarkson, P.J., Coleman, R., Keates, S., Lebbon, C.: Inclusive Design: Design for the Whole Population. Springer Science and Business Media, London (2013). https://doi.org/10.1007/978-1-4471-0001-0
Cunningham, J.: Contemporary European Narrative Jewellery: the prevalent themes, paradigms and the cognitive interaction between maker, wearer and viewer observed through the process, production and exhibition of narrative jewellery (Doctoral dissertation, University of Glasgow) (2008)
Desmet, P., Pohlmeyer, A.E.: Positive design: an introduction to design for subjective well-being. Int. J. Des. 7(3), 5–19 (2013).
Desmet, P., Nijhuis, J.: Four opportunities to design for well-being. Inspirational poster. Delft Institute of Positive Design, Delft (2013)
Desmet, Pieter M.A., Roeser, S.: Emotions in design for values. In: van den Hoven, J., Vermaas, Pieter E., van de Poel, I. (eds.) Handbook of Ethics, Values, and Technological Design, pp. 203–219. Springer, Dordrecht (2015). https://doi.org/10.1007/978-94-007-6970-0_6
European Commission: Smart Wearables: Reflection and orientation paper, Brussels (2016). http://ec.europa.eu/newsroom/document.cfm?doc_id=40542
Fortmann, J., Heuten, W., Boll, S.: User requirements for digital jewellery. In: Proceedings of the 2015 British HCI Conference, pp. 119–125. ACM, July 2015
Frankel, L.: Connecting virtual and visceral: an introduction to the evolution of wearable computers for industrial designers. In: Proceedings of the National Conference, Congress and Education Symposium, Industrial Designers Society of America and the International Council of Societies of Industrial Design. (CONNECTIONS 07), pp. 17–20. San Francisco (2007)
Goodacre, L., Cassim, J.: Footwear Design Challenge Workshop: Report to Arthritis Research UK of the Footwear Design Challenge Workshop. University of Central Lancashire (2010)
Goffman, E.: Stigma: Notes on the Management of Spoiled Identity. Simon and Schuster, New York (1986)
Grayson, K., Shulman, D.: Indexicality and the verification function of irreplaceable possessions: a semiotic analysis. J. Consum. Res. 27(1), 17–30 (2000)
Helmer, R.J., Mestrovic, M.A., Farrow, D., Lucas, S., Spratford, W.: Smart textiles: position and motion sensing for sport, entertainment and rehabilitation. In: Advances in Science and Technology, vol. 60, pp. 144–153. Trans Tech Publications (2008)
Heiss, L., Beckett, P., Carr-Bottomley, A.: Redesigning the trans-disciplinary: working across design, craft and technological boundaries to deliver an integrated wearable for cardiac monitoring. In: Proceedings of the 2016 ACM Conference on Designing Interactive Systems, pp. 691–699. ACM, June 2016
Hocking, C.: Function or feelings: factors in abandonment of assistive devices. Technol. Disabil. 11(1,2), 3–11 (1999)
Jordan, P.W.: Designing Pleasurable Products: an Introduction to the New Human Factors. Taylor and Francis, New York (2000)
Jacobson: Personalised Assistive Products: Managing Stigma and Expressing the Self (Doctoral Dissertation, Aalto University School of Arts, Design and Architecture) (2014)
Kettley, S.: Crafting the wearable computer: design process and user experience (Doctoral dissertation, Edinburgh Napier University) (2007)
Kettley, S.: The foundations of craft: a suggested protocol for introducing craft to other disciplines. Craft Res. 3(1), 33–51 (2012)
Kettley, S., Walker, S., Townsend, K.: Evidencing embodied participatory design. In: Proceedings of Critical Alternatives Conference, 17–21 August, Aarhus, Denmark (2015)
Koulidou, N.: Why should jewellers care about the digital? J. Jewellery Res. 17, 17–33 (2018)
Lee, Y., Cassim, J.: How the inclusive design process enables social inclusion. In: International Association of Societies of Design Research (IASDR), pp. 1–10 (2009)
Lim, Y., Nickpour, F.: Inclusive design; from physical to psychosocial – a literature analysis toward a definition of psychosocial dimensions in design. In: DS 80-9 Proceedings of the 20th International Conference on Engineering. Design (ICED 15), vol. 9, pp. 27–30 (2015)
Mann, S.: Wearable computing. In: the Encyclopedia of Human-Computer Interaction. 2nd edition, By the Interaction Design Foundation, 7 February 2019 (2013)
McCarthy, J., Wright, P., Wallace, J., Dearden, A.: The experience of enchantment in human–computer interaction. Pers. Ubiquit. Comput. 10(6), 369–378 (2006)
McCann, J., Bryson, D. (eds.): Smart clothes and wearable technology. Elsevier, Amsterdam (2009)
McCann, J.: Smart clothing for ageing population. In: McCann, J., Bryson, D. (eds.) Smart Clothes and Wearable Technology. Elsevier, Amsterdam (2009)
McCann, J.: Sportswear design for the active ageing. Fashion Practice 8(2), 234–256 (2016)
Møller, T., Kettley, S.: Wearable health technology design: a humanist accessory approach. Int. J. Des. 11(3), 35–49 (2017)
Møller, T.: Presenting the accessory approach: a start-up’s journey towards designing an engaging fall detection device. In: Proceedings of the 2018 CHI Conference on Human Factors in Computing Systems, p. 559. ACM, April 2018
Mugge, R., Schoormans, J.P., Schifferstein, H.N.: Design strategies to postpone consumers’ product replacement: the value of a strong person-product relationship. Des. J. 8(2), 38–48 (2005)
Mugge, R., Schifferstein, H., Schoormans, J.: Product attachment and satisfaction: the effects of pleasure and memories. ACR Eur. Adv. 8, 325–331(2007)
Mugge, R., Schoormans, J.P., Schifferstein, H.N.: Product attachment: design strategies to stimulate the emotional bonding to products. In: Schifferstein, N.H., Hekkert, P. (eds.) Product Experience, pp. 425–440. Elsevier (2008)
Mugge, R., Schoormans, J.P., Schifferstein, H.N.: Emotional bonding with personalised products. J. Eng. Des. 20(5), 467–476 (2009)
Nickpour, F.: Mobility+Disability+Inclusivity: Supporting an independent automotive experience, 2016 UXPA event, UK (2016). https://www.youtube.com/watch?v=RxsfQKl20kk
Nielsen, J.: Usability Engineering. Morgan Kaufman Publishers, San Francisco (1993)
Norman, D.: Emotional design, Why We Love or Hate Everyday Things. Basic Civitas Books, New York (2004)
Profita, H.P.: Designing Wearable Assistive Computing Devices to Support Social Acceptability and Personal Expression (Doctoral dissertation) (2017)
Profita, H.P.: Designing wearable computing technology for acceptability and accessibility. ACM SIGACCESS Accessibility Comput. 114, 44–48 (2016)
Pullin, G.: Design Meets Disability. MIT Press, Cambridge, Mass (2009)
Sanders, E.B.N., Stappers, P.J.: Co-creation and the new landscapes of design. Co-design 4(1), 5–18 (2008)
Schifferstein, H.N., Mugge, R., Hekkert, P.: Designing Consumer-Product Attachment. In: McDonagh, D., Hekkert, P., Van Erp, J., Gyi, D. (eds.) Design and Emotion: The Experience of Everyday Things, pp. 327–331. Taylor and Francis, London (2004)
Savaş, ö.: A perspective on the person-product relationship: attachment and detachment. In: McDonagh, D., Hekkert, P., Van Erp, J., Gyi, D. (eds.) Design and Emotion: The Experience of Everyday Things, pp. 316–320. Taylor and Francis, London (2004)
Seymour, S.: Fashionable technology: The Intersection of Design, Fashion, Science, and Technology. Springer, New York (2008). https://doi.org/10.1007/978-3-211-74500-7
Schultz, S.E., Kleine, R.E., Kernan, J.B.: These are a few of my favorite things: toward an explication of attachment as a consumer behavior construct. Adv. Consum. Res. 16(1), 359–366 (1989)
Silina, Y., Haddadi, H.: New directions in jewelry: a close look at emerging trends and developments in jewelry-like wearable devices. In: Proceedings of the 2015 ACM International Symposium on Wearable Computers, pp. 49–56. ACM, September 2015
Skogsrød, I.: Empathy and Aesthetics: Combating Stigma in the Design of Assistive Products. Artikkelsamling PD9-Institutt for Produktdesign, NTNU, Spring/autumn (2014)
Steinfeld, E.: Creating an inclusive environment. Trend Spotting at UD 2012 Oslo. Trends in Universal Design (2013)
Sun, M., et al.: eButton: a wearable computer for health monitoring and personal assistance. In: Proceedings of the 51st Annual Design Automation Conference, pp. 1–6. ACM (2014)
UÄŸur, S.: Wearing Embodied Emotions: A Practice-Based Design Research on Wearable Technology. Springer, Milan, Italy (2013). https://doi.org/10.1007/978-88-470-5247-5
Vaes, K.R.V., Stappers, P.J., Standaert, A., Desager, K.: Contending stigma in product design: using insights from social psychology as a stepping stone for design strategies. In: Out of Control; Proceedings of the 8th International Conference on Design and Emotion, London, Great Britain, 11–14 September 2012, Central Saint Martins College of Arts and Design (2012)
Valamanesh, R.: Important factors in the design of assistive technology to avoid the stigmatization of users. Arizona State University (2014)
Venere, F., Matteo, I.: When human body meets technology: the designer approach to wearable devices. In: 5th STS Italia Conference, pp. 989–1004. ITA (2014)
Versteeg, M., van den Hoven, E., Hummels, C.: Interactive jewellery: a design exploration. In Proceedings of the TEI 2016: Tenth International Conference on Tangible, Embedded, and Embodied Interaction, pp. 44–52. ACM, February 2016
Wallace, J.: Emotionally charged: a practice-centred enquiry of digital jewellery and personal emotional significance (Doctoral dissertation, Sheffield Hallam University) (2007)
Wallace, J., Press, M.: Craft knowledge for the digital age. In: Proceedings of the 6th Asian Design Conference, October 2003
Wright, P., Wallace, J., McCarthy, J.: Aesthetics and experience-centered design. ACM Trans. Comput.-Hum. Interact. (TOCHI) 15(4), 18 (2008)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Fayazi, N., Frankel, L. (2020). Creating Emotional Attachment with Assistive Wearables. In: Stephanidis, C., Kurosu, M., Degen, H., Reinerman-Jones, L. (eds) HCI International 2020 - Late Breaking Papers: Multimodality and Intelligence. HCII 2020. Lecture Notes in Computer Science(), vol 12424. Springer, Cham. https://doi.org/10.1007/978-3-030-60117-1_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-60117-1_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-60116-4
Online ISBN: 978-3-030-60117-1
eBook Packages: Computer ScienceComputer Science (R0)