Skip to main content
SpringerLink
Log in

Evolution in Additive Manufacturing Techniques of Metals as Net-Shaped Products

  • Chapter
  • First Online:
Near Net Shape Manufacturing Processes

Part of the book series: Materials Forming, Machining and Tribology ((MFMT))

Abstract

Among the various development in product development techniques near net shape manufacturing has assisted the manufacturers to develop complex structures with precision as per requirement. This chapter reports about three different types of additive manufacturing that has evolved out of near net shaped manufacturing. The three types of additive manufacturing are laser additive manufacturing, wire arc additive manufacturing and cold spray deposition technique. The effect of the various process parameters of the respective process are discussed in detail. The discussion is primarily focused on the development of shape memory alloy structures using the techniques mentioned and an analyses on the nature of the developed alloys. The surface morphology of the developed structures were evaluated using Scanning Electron Microscopy (SEM). The micro-hardness test reveals the mechanical properties of the samples. All the characterized results showed that SMA could be manufactured successfully using the mentioned techniques, though each system have their own pros and cons. Hence this chapter will give the researchers in beginning stage a clear idea about the evolution of near net shape manufacturing systems, that can be used by their research works in developing novel research ideas.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 84.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Hardcover Book
USD 109.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Gibson I, Rosen DW, Stucker B (2010) Additive manufacturing technologies. Springer

    Google Scholar 

  2. Shishkovsky I, Yadroitsev I, Smurov I (2012) Direct selective laser melting of nitinol powder. Phys Procedia 39:447–454

    Article  Google Scholar 

  3. Shishkovsky I, Scherbakov V (2012) Selective laser sintering of biopolymers with micro and nano ceramic additives for medicine. Phys Procedia 39:491–499

    Article  Google Scholar 

  4. Shiva S, Palani IA, Mishra SK, Paul CP, Kukreja LM (2015) Investigations on the influence of composition in the development of Ni-Ti shape memory alloy using laser based additive manufacturing. Opt Laser Technol 69:44–51

    Article  Google Scholar 

  5. Xue L, Islam MU (2000) Freeform laser consolidation for producing metallurgically sound and functional components. J Laser Appl 12:160–165

    Article  Google Scholar 

  6. http://www.optomec.com/downloads/Optomec-LENS-Sandia-Success-Story.pdf

  7. Milewski JO, Lewis GK, Thoma DJ, Keel GI, Nemec RB, Reinert RA (1998) Directed light fabrication of a solid metal hemisphere using 5-axis powder deposition. J Mater Process Technol 75:165–172

    Article  Google Scholar 

  8. Alimardani M, Fallah V, Khajepour A, Toyserkani E (2010) The effect of localized dynamic surface preheating in laser cladding of Stellite 1. Surf Coat Technol 204(23):3911–3919

    Article  Google Scholar 

  9. http://www-rpl.stanford.edu/research_detail.asp?ArticleID=8&ArticlePage=1&ProjectID=16

  10. www.swin.edu.au/iris/hplp.htm

  11. Kreutz E, Backes G, Gasser A, Wissenbach K (1995) Rapid prototyping with CO2 laser radiation. Appl Surf Sci 86:310–316

    Article  Google Scholar 

  12. Draugelates U et al (1994) Corrosion and wear protection by CO2 laser beam cladding combined with the hot wire technology. In: Proceeding of ECLAT ‘94, pp 344–354

    Google Scholar 

  13. Hensel F, Binroth C, Sepold G (1992) A comparison of powder and wire-fed laser beam cladding. In: Proceeding of ECLAT ‘92, pp 39–44

    Google Scholar 

  14. Yusoff WAY, Thomas AJ (2008) The effect of employing an effective laser sintering scanning strategy and energy density value on eliminating “orange peel” on a selective laser sintered part. In: Proceedings of international association for management of technology (IAMOT 2008)

    Google Scholar 

  15. Baker R (1925) Method of making decorative articles. US patent 1,533,300, filed 12 Nov 1920, patented 14 Apr 1925

    Google Scholar 

  16. Lorant E (2010) Effect of microstructure on mechanical properties of Ti-6Al-4 V structures made by additive layer manufacturing. Ph.D. thesis, Cranfield University, Cranfield

    Google Scholar 

  17. Quintino L, Costa A, Miranda R, Yapp D, Kumar V, Kong CJ (2007) Welding with high power fiber lasers—a preliminary study. Mater Des 28:1231–1237

    Article  Google Scholar 

  18. Zhao H, DebRoy T (2001) Weld metal composition change during conduction mode laser welding of aluminum alloy 5182. Metall Mater Trans B 32:163–172

    Article  Google Scholar 

  19. Paleocrassas AG, Tu JF (2007) Low-speed laser welding of aluminum alloy 7075-T6 using a 300-W, single-mode, Ytterbium fiber laser. Weld J 86:179–186

    Google Scholar 

  20. Chowdhury SM, Chen DL, Bhole SD, Powidajko E, Weckman DC, Zhou Y (2011) Microstructure and mechanical properties of fiber-laser-welded and diode-laser-welded AZ31 magnesium alloy. Metall Mater Trans A 42:1974–1989

    Article  Google Scholar 

  21. El-Batahgy Abdel-Monem (1997) Effect of laser welding parameters on fusion zone shape and solidification structure of austenitic stainless steels. Mater Lett 32(2–3):155–163

    Article  Google Scholar 

  22. Katayama S, Kawahito Y, Mizutani M (2012) Latest progress in performance and understanding of laser welding. Phys Procedia 39:8–16

    Article  Google Scholar 

  23. Balasubramanian M, Jayabalan V, Balasubramanian V (2009) effect of pulsed current gas tungsten arc welding parameters on microstructure of titanium alloy welds. J Manuf Sci Eng 131:064502-1–064502-4

    Article  Google Scholar 

  24. Abderrazak K, Salem WB, Mhiri H, Bournot P, Autric M (2009) Nd:YAG laser welding of AZ91 magnesium alloy for aerospace industries. Metall Mater Trans B 40:54–61

    Article  Google Scholar 

  25. Chowdhury SH, Chen DL, Bhole SD, Powidajko E, Weckman DC, Zhou Y (2012) Fiber laser welded AZ31 magnesium alloy: the effect of welding speed on microstructure and mechanical properties. Metall Mater Trans A 43:2133–2147

    Article  Google Scholar 

  26. Zhang RH, Pan JL, Katayama S (2011) The mechanism of penetration increase in A-TIG welding. Front Mater Sci 5(2):109–118

    Article  Google Scholar 

  27. Moradi M, Ghoreishi M (2011) Influences of laser welding parameters on the geometric profile of NI-base superalloy Rene 80 weld-bead. Int J Adv Manuf Technol 55:205–215

    Article  Google Scholar 

  28. Paleocrassas AG, Tu JF (2010) Inherent instability investigation for low speed laser welding of aluminum using a single-mode fiber laser. J Mater Process Technol 210:1411–1418

    Article  Google Scholar 

  29. Chen HC, Pinkerton AJ, Li L (2011) Fibre laser welding of dissimilar alloys of Ti-6Al-4 V and Inconel 718 for aerospace applications. Int J Adv Manuf Technol 52(9–12):977–987

    Article  Google Scholar 

  30. Sahoo P, DebRoy T, McNallan MJ (1988) Surface tension of binary metal-surface active solute systems under conditions relative to welding metallurgy. Metall Mater Trans B 19:483–491

    Article  Google Scholar 

  31. Sahoo P, Collur MM, DebRoy T (1988) Effects of oxygen and sulfur on alloying element vaporization rates during laser welding. Metall Trans B 19:967–972

    Article  Google Scholar 

  32. Pitscheneder W, DebRoy T, Mundra K, Ebner R (1996) Role of sulphur and processing variables on the temporal evolution of weld pool geometry during multi-kilowatt laser beam welding of steels. Weld J 75(3):71–78

    Google Scholar 

  33. Wang Y, Tsai HL (2001) Effects of surface active elements on weld pool fluid flow and weld penetration in gas metal arc welding. Metall Mater Trans B 32:501–515

    Article  Google Scholar 

  34. Zhao L, Tsukamoto S, Arakane G, Sugino T (2009) Influence of oxygen on weld geometry in fibre laser welding. ICALEO 2009:759–765

    Google Scholar 

  35. Kim HJ, Frost HR, Olson DL (1998) Electrochemical oxygen transfer during direct current arc welding. Weld J 779 (12):488–493

    Google Scholar 

  36. Ramazan K, Koray K (2005) Effect of controlled atmosphere on the mig-mag arc weldment properties. Mater Des 26(6):508–516

    Article  Google Scholar 

  37. Bayram K, Ramazan K, Suleyman G, Fatih H (2008) An effect of heat input, weld atmosphere and weld cooling conditions on the resistance spot weldability of 316L austenitic stainless steel. J Mater Process Technol 195:327–335

    Article  Google Scholar 

  38. Dursun O (2008) An effect of weld current and weld atmosphere on the resistance spot weldability of 304L austenitic stainless steel. Mater Des 29:597–603

    Article  Google Scholar 

  39. Ramirez JE, Han B, Liu S (1994) Effect of welding variables and solidification substructure on weld metal porosity. Metall Mater Trans A 25:2285–2294

    Article  Google Scholar 

  40. Kang BY, Yarlagadda KDV, Kang MJ, Kim HJ, Kim IS (2009) The effect of alternate supply of shielding gases in austenite stainless steel GTA welding. J Mater Process Technol 209:4722–4727

    Article  Google Scholar 

  41. Dong W, Kokawa H, Tsukamoto S, Yutaka SS (2005) Nitrogen desorption by high-nitrogen steel weld metal during CO2 laser welding. Metall Mater Trans B 36:677–681

    Article  Google Scholar 

  42. Ostsemin AA (2009) Estimating the temperature of an electrode-metal drop when welding in a carbon-dioxide atmosphere. Russ Eng Res 29(7):668–670

    Article  Google Scholar 

  43. Eriksson I, Powell J, Kaplan AFH (2011) Measurements of fluid flow on keyhole front during laser welding. Sci Technol Weld Joining 16(7):636–641

    Article  Google Scholar 

  44. Cheng Y, Jin X, Li S, Zeng L (2012) Fresnel absorption and inverse bremsstrahlung absorption in an actual 3D keyhole during deep penetration CO2 laser welding of aluminium 6016. Opt Laser Technol 44(5):1426–1436

    Article  Google Scholar 

  45. Fan D, Zhang R, Gu Y, Ushio M (2001) Effect of flux on A-TIG welding of mild steel. Trans JWRI 30:35–40

    Google Scholar 

  46. Heiple CR, Roper JR (1981) Effect of selenium on GTAW fusion zone geometry. Weld J 60(8):143–145

    Google Scholar 

  47.  Champagne VK (2008) The Repair of Magnesium Rotorcraft Components by Cold Spray, J. Fail. Anal. Prev 8(2):164–175

    Article  Google Scholar 

  48. Dykhuizen RC, Smith MF (1998) Gas dynamic principles of cold spray. J Therm Spray Technol 7(2):205 ASM International

    Article  Google Scholar 

  49. Bhargava P, Paul CP, Premsingh CH, Mishra SK, Atul Kumar, Nagpure DC et al (2013) Tandem rapid manufacturing of Inconel-625 using laser assisted and plasma transferred arc depositions. Adv Manuf 1:305–313

    Article  Google Scholar 

  50. Paul CP, Bhargava P, Atul Kumar, Pathak AK, Kukreja LM (2012) Laser rapid manufacturing: technology, applications, modeling and future prospects. In: Paulo Davim J (ed) Lasers in manufacturing. ISTE-Wiley, UK, pp 1–38

    Google Scholar 

  51. Paul CP, Mishra SK, Tiwari P, Kukreja LM (2013) Solid particle erosion behavior of WC/Ni composite clad layers with different contents of WC particles. Opt Laser Technol 50:155–162

    Article  Google Scholar 

  52. Wirth C, Comte V, Lagneau C, Exbrayat P, Lissac M, Jaffrezic-Renault N et al (2005) Nitinol surface roughness modulates in vitro cell response: a comparison between fibroblasts and osteoblasts. Mater Sci Eng C 25:51–60

    Article  Google Scholar 

  53. Otsuka K, Wayman CM (1998) Shape memory materials. Cambridge University Press, UK

    Google Scholar 

Download references

Acknowledgements

The authors would like to thank Royal Academy of Engineering (RAE), London for assisting the cold spray deposition experimentations carried out at Institute For Manufacturing (IFM), University of Cambridge, UK, under the Newton Bhabha Project (Project No.: HEPI\1516\10). Thanks are also due to Sophisticated Instrument Centre (SIC) at Indian Institute of Technology Indore, India, for providing us the required characterization facility.

Author information

Authors and Affiliations

  1. Mechatronics and Instrumentation Laboratory, Indian Institute of Technology Indore, Indore, India

    S. Shiva & I. A. Palani

  2. Institute for Manufacturing, Department of Engineering, University of Cambridge, Cambridge, UK

    S. Brown, A. Cockburn & W. O’Neill

  3. Discipline of Metallurgy Engineering and Material Science, Indian Institute of Technology Indore, Indore, India

    I. A. Palani

  4. Laser Development Industrial Applications Division, Raja Ramanna Centre for Advanced Technology, Indore, India

    C. P. Paul

  5. Homi Bhabha National Institute, BARC Training School Complex, Anushakti Nagar, Mumbai, India

    C. P. Paul

Authors
  1. S. Shiva
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. Brown
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. A. Cockburn
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. I. A. Palani
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. C. P. Paul
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. W. O’Neill
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to S. Shiva .

Editor information

Editors and Affiliations

  1. Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, Doornfontein, Johannesburg, South Africa

    Kapil Gupta

Rights and permissions

Reprints and permissions

Copyright information

© 2019 Springer Nature Switzerland AG

About this chapter

Check for updates. Verify currency and authenticity via CrossMark

Cite this chapter

Shiva, S., Brown, S., Cockburn, A., Palani, I.A., Paul, C.P., O’Neill, W. (2019). Evolution in Additive Manufacturing Techniques of Metals as Net-Shaped Products. In: Gupta, K. (eds) Near Net Shape Manufacturing Processes. Materials Forming, Machining and Tribology. Springer, Cham. https://doi.org/10.1007/978-3-030-10579-2_3

Download citation

  • DOI: https://doi.org/10.1007/978-3-030-10579-2_3

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-030-10578-5

  • Online ISBN: 978-3-030-10579-2

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation