Abstract
Gyroscopes would be more reliable, and less expensive, if they had neither spinning wheels nor flotation fluids. Single degree of freedom gyro (SDFG) wheel bearings must be stiff and isoelastic, and for both SDFGs and dynamically tuned gyros (DTGs) the bearings must be noiseless, as low friction as possible, and must start at low temperatures. Gas bearings cost more, and flotation fluids can require temperature control, damping compensation, and scrupulously clean assembly. By the 1960s every reasonable path around these problems had been tried.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Quick, W.H., “Theory of the vibrating string as an angular motion sensor”, Trans. ASME, J. Appl. Mech., pp. 523–534, Sep. 1964.
Chen Feng-Yu, Quing Rong-Kang, “The development of piezoelectric crystal gyroscopes in China”, DGON Symposium Gyro Technology, Stuttgart, 1988.
Boocock, D., L. Maunder, “Vibration of a symmetric tuning fork”, J. Mech. Eng. Sci. 11, 4, 1969.
Hunt, G.W., A.E.W. Hobbs, “Development of an accurate tuning-fork gyroscope”, Symposium on Gyros, Proc. Inst. Mech. Eng. (London), 1964–65, 179, 3E.
Lynch, D.D., “Hemispherical resonator gyro”, in Ragan, R.R. (Ed.) “Inertial Technology for the Future”, IEEE Trans. on Aerospace and Electronic Systems AES-20, 4, pp. 414–444, July 1984.
Bryan, G.H., “On the beats in the vibrations of a revolving cylinder or bell”, Proc. Camb. Phil. Soc., Vol VII, Nov. 24, pp. 101–111, 1890.
Fox, C.H.J., D.J.W. Hardie, “Vibratory gyroscopic sensors”, DGON Symposium Gyro Technology, Stuttgart, 1984.
Loper, E.J., D.D. Lynch, “Projected system performance based on recent HRG test results”, Paper S83–105, IEEE/AIAA 5th Digital Avionics Systems Conference, 31 Oct.-3 Nov., 1983.
Loper, E.J., D.D. Lynch, “The HRG: a new low-noise inertial rotation sensor”, 16th Joint Services Data Exchange for Inertial Systems, Los Angeles, CA, 1618 Nov. 1982.
Scott, W.B., “Delco makes low-cost gyro prototype”, Aviation Week and Space Technology, 25 October 1982.
Fox, C.H.J., “Vibrating cylinder rate gyro, theory of operation and error analysis”, DGON Symposium Gyro Technology, Stuttgart, 1988.
Burdess, J.S., “The dynamics of a thin piezoelectric cylinder gyroscope”, Proc. Inst. Mech. Engrs. (London), Vol. 200, No. C4, pp. 271–280, 1986.
Harris, D.G., “START: a novel gyro for weapon’s guidance”, DGON Symposium Gyro Technology, Stuttgart, 1988.
Koning, M.G., “Vibrating cylinder gyroscope and method”, U.S. Patent 4 793 185, 27 December 1988.
Pittman, R., “Rate Sensor”, U.S. Patent 3 359 806,26 December 1967.
Jones, B.G., “The development of a miniature twin-axis rate gyro”, in Mechanical Technology of Inertial Devices, Proc. Inst. Mech. Eng. (London), 1987–2, Paper C62/87.
Rider, B.F., “Sensor assembly having means for cancellation of harmonic induced bias from a two-axis linear accelerometer”, U.S. Patent 4 462 254, 31 Jul 1984.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1993 Springer-Verlag New York, Inc.
About this chapter
Cite this chapter
Lawrence, A. (1993). Vibrating Gyroscopes. In: Modern Inertial Technology. Springer, New York, NY. https://doi.org/10.1007/978-1-4684-0444-9_11
Download citation
DOI: https://doi.org/10.1007/978-1-4684-0444-9_11
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4684-0446-3
Online ISBN: 978-1-4684-0444-9
eBook Packages: Springer Book Archive