Abstract
Equipments for 3D shape measurement with compact and low-cost are required in wide industrial fields. We proposed Shape Measurement by a light source stepping method to realize the requirement. The method is one of the grating projection methods. In this method, multiple point light sources and a ronchi grating are used as a grating projector. Phase-shifting is performed with switching the light source position. By using this method, the shape measurement equipments can be produced with low-cost and compact because of no phase-shifting mechanisms. Also, the measurement speed is very fast because it is possible to switch the LED light sources in very short time. The grating can be projected without defocusing any place because of any focusing lenses in this projector. In this method, it is necessary that the emitting width on the point light source is narrow than the pitch of the ronchi grating. Brightness is also necessary for measuring the shape with accurate. Therefore, in this study, we develop a linear LED device for shape measurement by the light source stepping method. The effectiveness of the device is evaluated with an experimental test of shape measurement.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Fujigaki, M. and Morimoto, Y., "Shape Measurement with Grating Projection Using Whole-Space Tabulation Method," Journal of JSEM (in Japanese), 8-4, 92-98 (2008).
Fujigak,. M., Takagishi, A., Matui, T. and Morimoto, Y., "Development of Real-Time Shape Measurement System Using Whole-Space Tabulation Method," SPIE International Symposium, Proc. SPIE 7066, 706606 (2008).
Fujigaki, M., Masaya, A., Murakami, R. and Morimoto. Y, “Accuracy Improvement of Shape Measurement Using Whole-Space Tabulation Method”, Proc. of ICEM2009 held in Singapore, (2009).
Morimoto, Y., Fujigaki, M. and Masaya, A., “Shape Measurement by Grating Projection and Whole-space Tabulation Method”, Proc. of ISOT2009 held in Istanbul, (2009).
Takeda, M. and Mutoh, K., "Fourier Transform Profilometry for the Automatic Measurement of 3-D Object Shapes," Applied Optics, 22-24, 3977-3982 (1983).
Asundi, K. and Zhou, W., "Mapping Algorithm for 360-deg Profilometry with Time Delayed Integration Imaging," Optical Engineering, 38, 339-344 (1999).
Sitnik, P. and Kujawinska, M., "Digital Fringe Projection System for Large-volume 360-deg Shape Measurement," Optical Engineering, 41-2, 443-449 (2002).
Srinivasan, V., Liu, H. C. and Halioua, M., “Automated Phase-measuring Profilometry of 3-D Diffuse Objects,” Applied Optics, 23, 3105-3108 (1984).
Srinivasan, V., Liu, H. C and Halioua, M., “Automated Phase-measuring Profilometry: a Phase Mapping Approach, “ Applied Optics, 24, 185-188 (1985).
Morimoto, Y., Fujigaki, M., Masaya, A. and Amino, A., “Shape Measurement by Whole-space Tabulation Method Using Phase-shifting LED Projector”, Proce of International Conference on Advanced Phase Measurement Methods in Optics and Imaging, Monte Verita, Locarno, Switzerland, 17 (2010).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer Science+Businees Media, LLC
About this paper
Cite this paper
Oura, Y., Fujigaki, M., Masaya, A., Morimoto, Y. (2011). Development of Linear LED Device for Shape Measurement by Light Source Stepping Method. In: Proulx, T. (eds) Optical Measurements, Modeling, and Metrology, Volume 5. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-0228-2_35
Download citation
DOI: https://doi.org/10.1007/978-1-4614-0228-2_35
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-0227-5
Online ISBN: 978-1-4614-0228-2
eBook Packages: EngineeringEngineering (R0)