Abstract
Industrial robots are becoming a key component of modern manufacturing due to their flexibility and low-cost. However, the motion singularity and weak stiffness caused by the open series structure of the robot have a strong influence on its positioning accuracy and machining quality. In this paper, considering the dexterity and stiffness illustrated above, the method of workspace optimization and grinding deformation error compensation are utilized to improve the precision of the robot grinding. First of all, the robot dexterity analysis is carried out to obtain its dexterous workspace. And then, the workspace stiffness distribution is analyzed with the compliance ellipsoid model, which results in the acquisition of stiffer workspace. Finally, the characterization method of grinding normal deformation is proposed by setting the material removal rate as an index, and the way to compensate this deformation is brought out accordingly. A robot grinding experimental platform in this paper is set up based on KUKA KR210-2 to validate the method aforementioned. The accuracy is improved from 0.148 mm to 0.189 mm, which verifies the effectiveness of the proposed method.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yoshikawa, T.: Manipulability and redundancy control of robotic mechanisms. In: International Conference on Robotics & Automation. IEEE (2003)
Angeles, J., Rojas, A.: Manipulator inverse kinematics via condition-number minimization and continuation. Int. J. Robot. Autom. 2(2), 61–69 (1987)
Zargarbashi, S.H.H., Khan, W., Angeles, J.: The Jacobian condition number as a dexterity index in 6R machining robots. Robot. Comput. Integr. Manuf. 28(6), 694–699 (2012)
Guo, Y., Dong, H., Ke, Y.: Stiffness-oriented posture optimization in robotic machining applications. Robot. Comput. Integr. Manuf. 35, 69–76 (2015)
Bu, Y., Liao, W., Tian, W., et al.: Stiffness analysis and optimization in robotic drilling application. Precis. Eng. 49, 388–400 (2017)
Chen, C., Peng, F., Yan, R., et al.: Stiffness performance index based posture and feed orientation optimization in robotic milling process. Robot. Comput. Integr. Manuf. 55, 29–40 (2019)
Slavkovic, N.R., Milutinovic, D.S., Glavonjic, M.M.: A method for off-line compensation of cutting force-induced errors in robotic machining by tool path modification. Int. J. Adv. Manuf. Technol. 70(9–12), 2083–2096 (2014)
Wang, J., Zhang, H., Fuhlbrigge, T.: Improving machining accuracy with robot deformation compensation. In: IEEE/RSJ International Conference on Intelligent Robots & Systems. IEEE Press (2009)
Hartenberg, R., Denavit, J.: Kinematic Synthesis of Linkages. McGraw-Hill Book Company, New York (1964)
Lin, Y., Zhao, H., Ding, H.: Posture optimization methodology of 6R industrial robots for machining using performance evaluation indexes. Robot. Comput. Integr. Manuf. 48, 59–72 (2017)
Alici, G., Shirinzadeh, B.: Enhanced stiffness modeling, identification and characterization for robot manipulators. IEEE Trans. Robot. 21(4), 554–564 (2005)
Salisbury, J.K.: Active stiffness control of a manipulator in cartesian coordinates. In: IEEE Conference on Decision & Control (1980)
Zargarbashi, S.H.H., Khan, W., Angeles, J.: Posture optimization in robot-assisted machining operations. Mech. Mach. Theory 51, 74–86 (2012)
Ren, J., Hua, D.: Grinding Principle. Publishing House of Electronics Industry, Beijing (2011)
Acknowledgements
This work was supported by China Scholarship Council (No. 201706295033) and the National Science and Technology Major Project of the Ministry of Science and Technology of China (Grant No. 2017ZX04011011).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Zhang, X., Chen, B., Qi, J., Niu, Z. (2019). Robot Workspace Optimization and Deformation Compensation in Grinding. In: Yu, H., Liu, J., Liu, L., Ju, Z., Liu, Y., Zhou, D. (eds) Intelligent Robotics and Applications. ICIRA 2019. Lecture Notes in Computer Science(), vol 11745. Springer, Cham. https://doi.org/10.1007/978-3-030-27529-7_9
Download citation
DOI: https://doi.org/10.1007/978-3-030-27529-7_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27528-0
Online ISBN: 978-3-030-27529-7
eBook Packages: Computer ScienceComputer Science (R0)