Overview
- Comprises select peer-reviewed proceedings of ICFMMP 2019
- Discusses emerging applications of intelligent manufacturing techniques
- Covers innovative tools and techniques for improving safety and reducing waste
Part of the book series: Lecture Notes in Mechanical Engineering (LNME)
Included in the following conference series:
Conference proceedings info: ICFMMP 2019.
Access this book
Tax calculation will be finalised at checkout
Other ways to access
Table of contents (17 papers)
Keywords
About this book
Editors and Affiliations
About the editors
Dr. Chander Prakash is Associate Professor in the School of Mechanical Engineering, Lovely Professional University, Jalandhar, India. He has received Ph.D in mechanical engineering from Panjab University, Chandigarh, India. His area of research is biomaterials, rapid prototyping & 3-D printing, advanced manufacturing, modeling, simulation, and optimization. He has more than 11 years of teaching experience and 6 years’ of research experience. He has contributed extensively to the world in the titanium and magnesium based implant literature with publications appearing in Surface and Coating Technology, Materials and Manufacturing Processes, Journal of Materials Engineering and Performance, Journal of Mechanical Science and Technology, Nanoscience and Nanotechnology Letters, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. He has authored 60 research papers and 10 book chapters. He is also editor of 3 books: "Current Trends in Bio-manufacturing", Springer Series in Advanced Manufacturing, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., Dec. 2018; “3D Printing in Biomedical Engineering”, Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., August 2019, and "Biomaterials in Orthopaedics and Bone Regeneration - Design and Synthesis", Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., March 2019. He is also guest editor of 3 journals: special issue of “Functional Materials and Advanced Manufacturing”, Facta Universitatis, Series: Mechanical Engineering (Scopus Index), Materials Science Forum (Scopus Index), and special issue on “Metrology in Materials and Advanced Manufacturing”, Measurement and Control (SCI indexed).
Dr. Sunpreet Singh is researcher in NUS Nanoscience & Nanotechnology Initiative (NUSNNI). He has received Ph.D in Mechanical Engineering from Guru Nanak Dev Engineering College, Ludhiana, India. His area of research is additive manufacturing and application of 3D printing for development of new biomaterials for clinical applications. He has contributed extensively in additive manufacturing literature with publications appearing in Journal of Manufacturing Processes, Composite Part:B, Rapid Prototyping Journal, Journal of Mechanical Science and Technology, Measurement, International Journal of Advance Manufacturing Technology, and Journal of Cleaner Production. He has authored 10 book chapters and monographs. He is working in joint collaboration with Prof. Seeram Ramakrishna, NUS Nanoscience & Nanotechnology Initiative and Prof. Rupinder Singh, manufacturing research lab, GNDEC, Ludhiana. He is also editor of 3 books- "Current Trends in Bio-manufacturing", Springer Series in Advanced Manufacturing, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., Dec. 2018; “3D Printing in Biomedical Engineering”, Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., August 2019, and "Biomaterials in Orthopaedics and Bone Regeneration - Design and Synthesis", Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., March 2019. He is also guest editor of 3 journals- special issue of “Functional Materials and Advanced Manufacturing”, Facta Universitatis, series: Mechanical Engineering (Scopus Index), Materials Science Forum (Scopus Index), and special issue on “Metrology in Materials and Advanced Manufacturing”, Measurement and Control (SCI indexed).
Prof. J. Paulo Davim currently is Professor at the Department of Mechanical Engineering of the University of Aveiro, Portugal. He received his Ph.D. degree in mechanical engineering in 1997, M.Sc. degree in mechanical engineering (materials and manufacturing processes) in 1991, mechanical engineering degree (5 years) in 1986, from the University of Porto (FEUP), the Aggregate title (Full Habilitation) from the University of Coimbra in 2005 and the D.Sc. from London Metropolitan University in 2013. He is Senior Chartered Engineer by the Portuguese Institution of Engineers with an MBA and Specialist title in engineering and industrial management. He is also felicitated with Eur Ing by FEANI-Brussels and Fellow (FIET) by IET-London. He has more than 30 years of teaching and research experience in manufacturing, materials, mechanical and industrial engineering, with special emphasis in machining & tribology. He has also interest in management, engineering education and higher education for Sustainability. He has guided large numbers of postdocs, Ph.D. and master’s students as well as has coordinated and participated in several financed research projects. He has received several scientific awards. He has worked as evaluator of projects for ERC European Research Council and other international research agencies as well as examiner of Ph.D. thesis for many universities in different countries. He is the editor in chief of several international journals, guest editor of journals, books editor, book series editor and scientific advisory for many international journals and conferences. Presently, he is an editorial board member of 30 international journals and acts as reviewer for more than 100 prestigious Web of Science journals. In addition, he has also published, as editor (and co-editor), more than 100 books and as author (and co-author) more than 10 books, 80 book chapters and 400 articles in journals and conferences (more than 250 articles in journals indexed in Web of Science core collection /h-index 49+/7000+ citations, SCOPUS/h-index 56+/10000+ citations, Google Scholar/h-index 70+/16000+).
Bibliographic Information
Book Title: Advances in Intelligent Manufacturing
Book Subtitle: Select Proceedings of ICFMMP 2019
Editors: Grzegorz Krolczyk, Chander Prakash, Sunpreet Singh, Joao Paulo Davim
Series Title: Lecture Notes in Mechanical Engineering
DOI: https://doi.org/10.1007/978-981-15-4565-8
Publisher: Springer Singapore
eBook Packages: Engineering, Engineering (R0)
Copyright Information: Springer Nature Singapore Pte Ltd. 2020
Hardcover ISBN: 978-981-15-4564-1Published: 10 June 2020
Softcover ISBN: 978-981-15-4567-2Published: 10 June 2021
eBook ISBN: 978-981-15-4565-8Published: 09 June 2020
Series ISSN: 2195-4356
Series E-ISSN: 2195-4364
Edition Number: 1
Number of Pages: XI, 219
Number of Illustrations: 26 b/w illustrations, 42 illustrations in colour
Topics: Manufacturing, Machines, Tools, Processes, Computational Intelligence, Control, Robotics, Mechatronics, Engineering Economics, Organization, Logistics, Marketing, Artificial Intelligence