Abstract
The results of shaping process were obtained by the process scheme of serial stretching for biconvex skin of workpieces using the ANSYS/LS-DYNA software. The analysis is based on different flow material characteristics during plastic deformation at solid friction. A statistical analysis of the calculation results for disturbing factors assessment is carried out.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Mikheev, V.A., Dement’ev, S.G., Samokhvalov, V.P., Savin, D.V., and Surudin, S.V., Isometric Conditions during Stretch Shaping Process of Biconvex Skin with Lower Gage Interference, Izv. SamNts RAN, 2013, vol. 15, no. 6, pp. 161–166.
Mikheev, V.A., Klochkov, Yu.S., Kuzina, A.A., Grechnikova, A.F., and Savin, D.V., The Serial Stretch Shaping of Dribbling-Generated Shells with Lower Gage Interference, Vestnik SGAU, 2012, no. 5, pp. 246–252.
Mikheev, V.A., Klochkov, Yu.S., Kuzina, A.A., Grechnikova, A.F., and Savin, D.V., The Kinematic Scheme Selection of Dribbling-Generated Shells of Complex Spatial Form during the Stretch Shaping Process, Vestnik SGAU, 2012, no. 5, pp. 239–245.
Dem’yanenko, E.G., A Technique of Shaping the Barrel-Type Parts, Izv.Vuz. Av. Tekhnika, 2014, vol. 57, no. 2, pp. 72–76 [Russian Aeronautics (Engl. Transl.), vol. 57, no. 2, pp. 204–211].
Dem’yanenko, E.G. and Popov, I.P., Limits of Flanging Process Feasibility to Create Thin-Wall Conical Shells, Izv.Vuz. Av. Tekhnika, 2012, vol. 55, no. 4, pp. 60–62 [Russian Aeronautics (Engl. Transl.), vol. 55, no. 2, pp. 408–412].
Grechnikov, F.V., Antipov, V.V., Erisov, Yu.A., and Grechnikova, A.F., A Manufacturability Improvement of Glass-Fiber Reinforced Aluminum Laminate by Shaping an Effective Crystallographic Texture in V95 Alloy Sheets, Izv.Vuz. Tsvetnaya Metallurgiya, 2014, vol. 55, no. 6, pp. 38–43 [Russian Journal of Non-Ferrous Metals (Engl. Transl.), vol. 56, no. 1, pp. 39–43].
Levine, D. M., Statistics for Six Sigma Green Belts with Minitab and JMP, Upper Saddle River, NJ: Financial Times–Prentice Hall, 2002.
Chekmarev, A.N., Barvinok, V.A., and Shalavin, V.V., Statisticheskie metody upravleniya kachestvom (Statistical Methods for Quality Control), Moscow: Mashinostroenie, 1999.
Grechnikov, F.V., Deformirovaniye anizotropnykh materialov. Rezervy intensifikatsii (The Deformation of Anisotropic Materials. Intensification Reserves), Moscow: Mashinostroenie, 1998.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.A. Mikheev, S.D. Smol’nikov, S.V. Surudin, D.V. Savin, 2016, published in Izvestiya VUZ, Aviatsionnaya Tekhnika, 2016, No. 1, pp. 132–136.
About this article
Cite this article
Mikheev, V.A., Smol’nikov, S.D., Surudin, S.V. et al. Statistical analysis of stretch shaping process of biconvex skin. Russ. Aeronaut. 59, 145–150 (2016). https://doi.org/10.3103/S1068799816010232
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068799816010232