Abstract
The load capacity of planetary roller screws may be increased, without increase in their size, by decreasing the profile angle of the screw threads. The profile angle affects the nonuniformity of the load distribution among the roller screws due to the tipping torque; that influence is investigated. A method is developed for balancing the tipping torque; a simplified diagram of the system is proposed. The nonuniformity is written as a function of the screw threads’ profile angle for the mechanism.
Similar content being viewed by others
REFERENCES
Blinov, D.S., Planetarnye rolikovintovye mekhanizmy. Konstruktsii, metody raschetov (Planetary Roller Screw Mechanisms: Design and Calculation Methods), Rya-khovskii, O.A., Ed., Moscow: Bauman Moscow State Tech. Univ., 2006.
Morozov, V.V., Rolikovintovye mekhanizmy. Kinematicheskie kharakteristiki (Roller Screw Mechanisms. Kinematic Characteristics), Vladimir: Vladimirsk. Gos. Univ., 2005.
Blinov, D.S., Determination of the number of loading cycles of thread turns of parts of planetary roller screw gears, Spravochnik. Inzh. Zh., 2003, no. 7, pp. 19–25.
Roller Screws: SKF–PUB MT/P1 14489 RU, 2014. https://www.skf.com/binary/82-153959/14489-EN-Roller-screw-catalogue.pdf. Accessed June 1, 2019.
Ryakhovskii, O.A., Sorokin, F.D., and Marokhin, A.S., Calculation of radial displacements of nut and rollers axes and the position of a contact between the nut and the roller thread in an inverted planetary roller screw mechanism, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2013, no. 11, pp. 12–19.
Sokolov, P.A., Sorokin, F.D., Ryakhovskii, O.A., et al., Load-bearing contact of working surfaces of flight of helix of planetary roller-screw mechanism, Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Ser. Mashinostr., 2006, no. 1, pp. 61–72.
Sokolov, P.A., Rational choice of preload in planetary roller-screw gears, taking into account the manufacturing accuracy, Cand. Sci. (Eng.) Dissertation, Moscow, 1997.
Blinov, D.S., Dikun, E.V., and Kolobov, A.Yu., On the unevenness of the load distribution between the mating turns of the parts of roller screw gears, XLIV Akademicheskie chteniya po kosmonavtike “Korolevskie chteniya” (44th Academic Readings on Cosmonautics “Korolev Readings”), Moscow: Bauman Moscow State Tech. Univ., 2020, vol. 2, pp. 304–306.
Ryakhovskii, O.A., Marokhin, A.S., Vorob’ev, A.N., and Khachirova, O.A., Experimental study of the nature of the load distribution on the turns of the thread of the planetary roller-screw mechanism, Inzh. Zh.: Nauka Innovat., 2019, no. 12 (96), p. 4.
Blinov, D.S. and Morozov M.I., The unevenness of the load distribution between the mating turns of the roller and the screw with the nut of the planetary roller screw transmission, Nauka Obrazov.: Nauch. Izd. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014, no. 9, pp. 1–14. https://doi.org/10.7463/0914.0727121
Zenkina, Ya.P., On the load capacity of screw rolling mechanisms, Politekh. Molod. Zh., 2017, no. 8, pp. 1–7.
Blinov, D.S. and Zenkina, Ya.P., General case to determine dimensions and their tolerance zones for the thread parts of epicyclic roller-screw mechanisms, Nauka Obrazov.: Nauch. Izd. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2017, no. 4, pp. 16–32. https://doi.org/10.7463/0417.0001123
Blinov, D.S. and Zenkina, Ya.P., General case in determining center-to-center spacing between the screw and the roller in a roller drive, and initial contact point of their mating thread turns. Development of calculation method and software, Mash. Ustan.: Proekt., Razrab., Ekspl., 2017, no. 3, pp. 15–34. https://doi.org/10.24108/aplts.0317.0000069
Blinov, D.S. and Zenkina, Ya.P., Development of increased load capacity structures of planetary roller screw mechanisms (determination of inter-axial distance increment), Mashinostr. Komp. Tekhnol., 2018, no. 2, pp. 18–36. https://doi.org/10.24108/0218.0001371
Blinov, D.S., Developing methods of stress calculation at the contact points of thread turns in planetary roller-screw transmissions, Spravochnik. Inzh. Zh., 2003, no. 8, pp. 33–40.
Ryakhovskii, O.A., Vorob’ev, A.N., and Marokhin, A.S., Planetary roller screw mechanism with shaped rollers for converting rotational motion to linear motion, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2017, no. 8 (689), pp. 3–7.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Blinov, D.S., Zenkina, Y.P. & Nakhatakyan, F.G. Contact Interactions of the Roller in a Planetary Roller Screw and Their Influence on the Load Capacity. Russ. Engin. Res. 42, 884–890 (2022). https://doi.org/10.3103/S1068798X22090052
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22090052