Abstract
New methods are proposed for controlling the shaping process in free channel extrusion with misalignment of the punch and matrix, so as to obtain the required wall height. Comparison with experimental results shows that the formulas obtained are highly accurate.
Similar content being viewed by others
REFERENCES
Vorontsov, A.L., Stamping of nonuniform channels. 5. Calculation methods for channel extrusion. 5.1. Formulas, Russ. Eng. Res., 2021, vol. 41, pp. 1035–1039. https://doi.org/10.3103/S1068798X21110290
Vorontsov, A.L., Stamping of nonuniform channels. 5. Calculation methods for channel extrusion. 5.2. Extrusion of nonhardening materials, Russ. Eng. Res., 2022, vol. 42, pp. 35–43. https://doi.org/10.3103/S1068798X22010233
Vorontsov, A.L., Stamping of nonuniform channels. 5. Calculation methods for channel extrusion. 5.3. Extrusion of hardening materials, Russ. Eng. Res., 2022, vol. 42, pp. 132–137. https://doi.org/10.3103/S1068798X22020265
Vorontsov, A.L., Stamping of nonuniform channels. 5. Calculation methods for channel extrusion. 5.4. Methods of controlling the flow of squeezed out material, Vestn. Mashinostr., 2022, no. 4, pp. 59–63. https://doi.org/10.36652/0042-4633-2022-3-59-63
USSR Inventor’s Certificate no. 1696077.
Vorontsov, A.L., Teoriya i raschety protsessov obrabotki metallov davleniem (Theory and Calculations of Metal Forming by Pressure), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014, vol. 1.
Dmitriev, A.M. and Vorontsov, A.L., Physical pattern and determination of force parameters of extrusion of hollow cylindrical products, Kuznechno-Shtamp. Proizvod., 2004, no. 6, pp. 3–8.
Vorontsov, A.L., Stamping of nonuniform channels. 2. Theoretical analyses of nonuniform-channel extrusion: A review, Russ. Eng. Res., 2021, vol. 41, pp. 410–415. https://doi.org/10.3103/S1068798X21050269
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
Earlier articles in this series may be found in Russian Engineering Research in issue 8, 10, 11 (2021) and issues 3, 4 (2022).
About this article
Cite this article
Vorontsov, A.L. Stamping of Nonuniform Channels. 5. Calculation Methods for Channel Extrusion. 5.5. Other Methods of Controlling the Extruded Flow. Russ. Engin. Res. 42, 807–811 (2022). https://doi.org/10.3103/S1068798X22080263
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22080263