Abstract
On the basis of the complete set of plastic-flow equations, the extrusion force, the maximum pressure at the matrix wall, and the wall height in channel extrusion are determined, taking account of the elastic deformation of the matrix.
Similar content being viewed by others
REFERENCES
Vorontsov, A.L., Stamping of nonuniform channels. 1. Comparison of methods of channel production, Russ. Eng. Res., 2021, vol. 41, no. 4, pp. 308–311.
Vorontsov, A.L., Stamping of nonuniform channels. 2. Theoretical analyses of nonuniform-channel extrusion: a review, Russ. Eng. Res., 2021, vol. 41, no. 5, pp. 410–415.
Vorontsov, A.L., Stamping of nonuniform channels. 3. Forces and shape changes in channel extrusion. 3.1. Kinematic and stress state of workpiece, Russ. Eng. Res., 2021, vol. 41, no. 6, pp. 519–524.
Prozorov. L.V., Cold extrusion of thin-walled products, in Novye issledovaniya v oblasti kuznechnoi tekhnologii (New Studies in Forging Technology), Moscow: Mashgiz, 1950, book 32, pp. 87–96.
Vorontsov, A.L., Teoriya i raschety protsessov obrabotki metallov davleniem (Theory and Calculations of Metal Forming by Pressure), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014, vol. 1.
Ivanov, S.K. and Ganago, O.A., Metal pressure on the die walls during closed piercing, Kuznechno-Shtampovochnoe Proizvod., 1969, no. 3, pp. 3–5.
Vorontsov, A.L., Teoriya i raschety protsessov obrabotki metallov davleniem (Theory and Calculations of Metal Forming by Pressure), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014, vol. 2.
Evstratov, V.A., Kulikov, I.V., and Ivanov, O.M., Influence of tool misalignment on the character of deformation, power mode, and loads affecting the punch during extrusion, Vestn. Khar’k. Politekh. Inst., 1977, no. 131, pp. 38–44.
Semenov, E.I. and Snimshchikov, V.E., The influence of the tool deviation from the alignment on the deformation character and technological force during reverse extrusion with a conical punch, Vestn. Mashinostr., 1990, no. 10, pp. 64–66.
Kholodnaya ob’emnaya shtampovka: Spravochnik (Cold Bulk Stamping: A Handbook), Navrotskii, G.A., Ed., Moscow: Mashinostroenie, 1973.
Eames, R.W., US Patent 3 651 681, 1972.
Vorontsov, A.L., USSR Inventor’s Certificate no. 1263418, 1986.
Belkov, E.G., Vorontsov, A.L., Bunatyan, G.V., et al., Kovka i shtampovka: Spravochnik. T. 3. Kholodnaya ob’’emnaya shtampovka. Shtampovka metallicheskikh poroshkov (Forging and Stamping: A Handbook, Vol. 3: Cold Bulk Stamping. Stamping of Metal Powders), Semenov, E.I., Ed., Moscow: Mashinostroenie, 2010.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Vorontsov, A.L. Stamping of Nonuniform Channels. 3. Forces and Shape Changes in Channel Extrusion. 3.2. Determining the Extrusion Force, Maximum Wall Pressure, and Wall Height. Russ. Engin. Res. 41, 621–626 (2021). https://doi.org/10.3103/S1068798X21070261
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21070261