Abstract
A mixture composition for the manufacture of cutting wheels based on a Bakelite matrix is proposed. The mixture contains surfactants in the form of fine molybdenum-disulfide and chromium-diiodide powders. The performance of the resulting wheels is investigated.
Similar content being viewed by others
REFERENCES
Ibatullin, I.D., Grishin, R.G., and Sharaukhova, A.G., Dynamic balancing and strengthening for high speed abrasive weel grinding method of detonation spraying, Izv. Samarsk. Nauchn. Tsentra Ross. Akad. Nauk, 2016, vol. 18, no. 4 (6), pp. 1062–1067.
Garshin, A.P. and Fedotova, S.M., Materialovedenie. Tom 3: Tekhnologiya konstruktsionnykh materialov: Abrazivnye instrumenty (Materials Science. Vol. 3: Technology of Structural Materials: Abrasive Tools), Garshin, A.P., Ed., Moscow: Yurait, 2016.
Butenko, V.I. and Gusakova, L.V., Povyshenie effektivnosti shlifovaniya poverkhnostei detalei mashin (Increasing the Efficiency of Grinding Surfaces of Machine Parts). Taganrog: South. Fed. Univ., 2012.
Rait, V.V., Fillers used in the production of abrasive tools on a bakelite bundle and calculation of the formulation of molding mixtures, in Abrazivnyi instrument i metalloobrabotka (Abrasive Tools and Metal-Working), Chelyabinsk: South Ural State Univ., 2002, pp. 55–61.
Ashikhmin, I.V., in Rezanie metallov i tekhnologiya mashinostroeniya. Dvukhkomponentnyi dinamometr (Metal Cutting and Technology of Engineering. Two-Component Dynamometer), Novocherkassk: Novocherkassk Polytech. Inst., 1973, vol. 274, no. 3, pp. 71–74.
Butenko, V., Gusakova, L., Durov, D., et el., Method for improving the quality of the product obtained by abrasive treatment with impregnated tools, Adv. Sci. Technol. Eng. Syst. J., 2020, vol. 5, no. 6, pp. 398–402.
Orlova, T.N., Cuttoff disk structural and mechanical model, Vestn. Saratov. Gos. Tekh. Univ., 2006, vol. 4, no. 2 (17), pp. 29–31.
Funding
The work was supported by the Ministry of Science and Higher Education of Russian Federeation, project no. 075-15-2020-924 under the program for creating and developing the world-class Sverkhzvuk scientific center (2020–2025).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they has no conflict of interest.
Additional information
Translated by B. Gilbert
About this article
Cite this article
Butenko, V.I., Dolgov, O.S., Durov, D.S. et al. Improving Cutting Wheels with a Bakelite Matrix. Russ. Engin. Res. 42, 464–467 (2022). https://doi.org/10.3103/S1068798X22050082
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22050082