Abstract
A pressure-driven electrolytic membrane system of drum type is proposed. Solutions may be effectively separated by combining the pressure-driven electrolytic membrane technique with water cooling of the electrode. The drainage channels from the anode and cathode regions are independent. A method is proposed for calculating the strength of the system’s housing. The required thickness of the outer wall and the fiberglass flanges is determined.
Similar content being viewed by others
REFERENCES
Gogina, E. and Makisha, N., Information technologies in view of complex solution of waste water problems, Appl. Mech. Mater., 2014, vols. 587–589, pp. 636–639.
Kolesnikov, V.A., Il’in, V.I., and Kucherov, A.A., Wastewater treatment at metallurgical plants, Ekol. Proizvod., 2010, no. 3, pp. 31–36.
Paidar, M., Fateev, V., and Bouzek, K., Membrane electrolysis—History, current status and perspective, Electrochim. Acta, 2016, vol. 209, pp. 737–756.
Alino, A. and Cicero, G., AC electroosmosis: basics and lab-on-a-chip applications, in Encyclopedia of Nanotechnology, Dordrecht: Springer-Verlag, 2012, pp. 25–30.
Dubyaga, V.P. and Besfamil’nyi, I.B., Nanotechnologies and membranes, Krit. Tekhnol. Membr., 2005, no. 3, pp. 11–16.
Lazarev, S.I., Kovalev, S.V., Kovaleva, O.A., et al., Flat-chamber electrobaromembrane apparatus with improver characteristics and its calculation method, Chem. Petrol. Eng., 2019, vol. 53, nos. 1–2, pp. 114–121.
Lazarev, S.I., Abonosimov, O.A., Ryabinskii, M.A., and Gorbachev, A.S., Calculation of mass transfer in a roll-type electrobaromembrane apparatus, Izv. Vyssh. Uchebn. Zaved., Khim. Khim. Tekhnol., 2008, vol. 51, no. 5, pp. 109 – 111.
Kovaleva, O.A., Lazarev, S.I., and Kovalev, S.V., Development and calculation of an electrobaromembrane apparatus for purifying process solutions, Chem. Petrol. Eng., 2017, vol. 53, no. 1, pp. 21–25.
Lazarev, S.I., Kovalev, S.V., Kovaleva, O.A., and Konovalov, D.N., Development of the design and calculation of the effective area of membranes and the total volume of the solution to be separated in a roll-type electric baromembrane apparatus, Vestn. Mashinostr., 2019, no. 12, pp. 21–24.
Kovalev, S.V., Lazarev, S.I., Kovaleva, O.A., et al., Calculation of the design of the electric baromembrane flat-chamber apparatus an the volume of the solution to be separated, Vestn. Mashinostr., 2020, no. 2, pp. 34–41.
Kovalev, S.V., Lazarev, K.S., Lazarev, S.I., and Solomina, O.A., RF Patent 2487746, 2013.
STP 10-04-02. Raschet na prochnost’ sosudov i apparatov. Tom 1. Raschet na prochnost’ vertikal’nykh i gorizontal’nykh apparatov (STP 10-04-02: Calculations of Strength of Vessels and Devices, Vol. 1: Calculations for Strength of Vertical and Horizontal Devices), Moscow: Truboprovod, 2005.
Comparative characteristics of the properties of fiberglass, steel, and aluminum alloys. http://polisfera.pulscen.ru.
Funding
Financial support was provided by the Russian Foundation for Basic Research (project 19-38-90117).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Lazarev, S.I., Abonosimov, O.A., Selivanov, Y.T. et al. Pressure-Driven Electrolytic Membrane System for Wastewater Treatment. Russ. Engin. Res. 41, 783–787 (2021). https://doi.org/10.3103/S1068798X21090173
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21090173