Abstract
The effectiveness of repeated shot treatment in increasing the fatigue strength of high-strength 30ХГСН2А steel parts is established experimentally. Repeated shot treatment not only restores the initial life but increases it significantly.
Similar content being viewed by others
REFERENCES
Boitsov, B.V., Rykovskii, B.P., Kravchenko, G.N., et al., Efficiency of re-hardening of high-strength structural materials 30KhGSN2A and VT22, Vestn. Mashinostr., 1981, no. 3, pp. 12–13.
Kravchenko, G.H. and Kravchenko, K.G., Restoring the fatigue life of surface-hardened airplane parts by repeated shot hardening, Russ. Eng. Res., 2020, vol. 40, no. 3, pp. 218–223.
Danilov, M.S. and Sin’kovskii, N.M., Technological improvement of the assigned resource of high-strength steel parts, Aviats. Prom-st’, 1988, no. 8, pp. 73–74.
Kravchenko, G.H. and Kravchenko, K.G., The efficiency of re-hardening for restoration of the durability of the aircraft power parts, Polet, 2019, no. 7, pp. 54–60.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Kravchenko, G.N., Kravchenko, K.G. Repeated Shot Treatment to Increase the Fatigue Strength of High-Strength Steel Parts. Russ. Engin. Res. 40, 930–932 (2020). https://doi.org/10.3103/S1068798X20110143
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20110143