Abstract
In practice, it is useful to generate quick estimates of the life of engineering systems after changes in the fatigue characteristics of their parts. Various means of rapid estimation are analyzed in the present work. Assessment of the life in terms of the specified probability of fault-free operation is of particular interest. After the use of such rapid methods, the best approach to improving the parts may be identified.
Similar content being viewed by others
References
Pronnikov, A.S., Parametricheskaya nadezhnost’ mahsin (Parametric Reliability of Machines), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2002.
Kogaev, V.P., Makhutov, N.A., and Gusenkov, A.P., Raschety detalei mashin i konstruktsii na prochnost’ i dolgovechnost’: Spravochnik (Calculations of Machine Parts and Constructions for Strength and Durability: Handbook), Moscow: Mashinostroenie, 1985.
Volkov, D.P. and Nikolaev, S.N., Nadezhnost’ stroitel’nykh mashin i oborudovaniya: uchebnoe posobie dlya studentov vuzov (Reliability of Construction Machines and Equipment: Manual for Students of Hisher Education Institutions), Moscow: Vysshaya Shkola, 1979.
Androsov, A.A., Nadezhnost’ tekhnicheskikh sistem: uchebnoe posobie (Reliability of Technical Systems: Manual), Rostov-on-Don: Donsk. Gos. Tekh. Univ., 2000.
Spichenkov, V.V. and Androsov, A.A., Metody tekhnicheskikh eksperimentov: uchebnoe posobie (Procedures of Technical Experiments: Manual), Rostov-on-Don: Donsk. Gos. Tekh. Univ., 1993.
Man’shin, Yu.P. and Man’shina, E.Yu., Reliable calculations in the design of agricultural machines and equipment, Materialy 6-i mezhdunarodnoi nauchnoprakticheskoi konferentsii “Sostoyanie i perspektivy razvitiya sel’sel’skokhozyaistvennogo mashinostroeniya,” 26 fevralya–1 marta 2013 g. (Proc. Sixth Int. Sci.-Pract. Conf. “Modern and Prospective Development of Agricultural Machine Engineering,” February 26–March 1, 2013), Rostov-on-Don, 2013.
Man’shin, Yu.P., Proektirovanie tekhnicheskikh sistem s zadannym urovanem nadezhnosti: uchebnoe posobie (Engineering of Technical Systems with Particular Reliability Level: Manual), Rostov-on-Don: Donsk. Gos. Tekh. Univ., 2013.
Man’shin, Yu.P. and Man’shina, E.Yu., Calculation of reliability parameters of the technical system at the final stages of the project, Materialy 7-i mezhdunarodnoi nauchno-prakticheskoi konferentsii “Sostoyanie i perspektivy razvitiya sel’sel’skokhozyaistvennogo mashinostroeniya,” 25–27 fevralya 2014 g. (Proc. Seventh Int. Sci.-Pract. Conf. “Modern and Prospective Development of Agricultural Machine Engineering,” February 25–27, 2014), Rostov-on-Don, 2014.
Raschety nadezhnosti mashin i mekhanizmov: uchebnoe posobie (Calculation of Reliability of Machines and Mechanisms: Manual), Rostov-on-Don: Donsk. Gos. Tekh. Univ., 2012. http://de.dstu.edu.ru/CDOSite/Pages/Kafedra.aspx?idk=40.
Detali mashin. Raschet i konstruirovanie: Spravochnik (Machine Parts: Calculation and Engineering. Manual), Acherkan, N.S., Ed., Moscow: Mashinostroenie, 1968, vol. 1.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.P. Man’shin, E.Yu. Man’shina, 2017, published in Vestnik Mashinostroeniya, 2017, No. 12, pp. 20–24.
About this article
Cite this article
Man’shin, Y.P., Man’shina, E.Y. Estimating the Life of a Machine Part. Russ. Engin. Res. 38, 157–161 (2018). https://doi.org/10.3103/S1068798X18030103
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18030103