Abstract
The mating of components at plane–cylinder surfaces is studied, by simulation. The influence of the shape and positional precision of the coupled surfaces on the relative position of the components is analyzed.
Similar content being viewed by others
References
Vdovin, R.A., Smelov, V.G., Bolotov, M.A., and Pronichev, N.D., Paths of improving the technological process of manufacture of GTE turbine blades, IOP Conf. Ser.: Mater. Sci. Eng., 2016, vol. 142, no. 012073, pp. 1–8.
Smelov, V.G., Sotov, A.V., and Agapovichev, A.V., Recovery technology features of aerospace parts by layering synthesis, Key Eng. Mater., 2016, vol. 684, pp. 316–322.
Zakharov, O.V. and Kochetkov, A.V., Minimization of the systematic error in centerless measurement of the roundness of parts, Meas. Techn., 2016, vol. 58, no. 12, pp. 1317–1321.
Popov, G.M., Baturin, O.V., Kolmakova, D.A., and Krivcov, A.V., Improvement results of TK-32 turbocompressor turbine with gas-dynamics and strength CAE-systems, Int. J. Eng. Technol., 2014, vol. 6, no. 5, pp. 2297–2303.
Shabliy, L.S. and Cherniaev, A., Optimization of gas turbine compressor blade parameters for gas-dynamic efficiency under strength constraint, Proc. 4th Int. Conf. on Simulation and Modeling Methodologies, Technologies and Applications, August 28–30, 2014, Vienna, 2014, pp. 523–528.
Ryazanov, A.I., Automated 3D modeling of working turbine blades, Russ. Eng. Res., 2016, vol. 36, no. 9, pp. 751–754.
Bolotov, M.A., Pechenin, V.A., and Murzin, S.P., Method for uncertainty evaluation of the spatial mating of high-precision optical and mechanical parts, Komp. Opt., 2016, vol. 40, no. 3, pp. 360–369.
Besl, P.J. and Mckay, N.D., A method for registration of 3-D shapes, IEEE Trans. Pattern Anal. Mach. Intell., 1992, vol. 14, no. 2, pp. 239–256.
Pierce, R.S. and Rosen, D., Simulation of mating between nonanalytical programming formulation, J. Comp. Inf. Sci. Eng., 2007, vol. 7, no. 4, pp. 314–321.
Brzhozovskii, B.M. and Zakharov, O.V., Disk tool profiling for the processing of helical surfaces in the Matlab, Avtom. Sovrem. Tekhnol., 2012, no. 10, pp. 7–11.
Gimadiev, A.G., Stadnik, D.M., and Bratchinin, D.S., Analysis of the flow force in the fuel components supply valves of the aircraft engines, ARPN J. Eng. Appl. Sci., 2014, vol. 9, no. 12, pp. 2864–2866.
Badykova, L., Stadnik, D., Afanasev, K., Igolkin, A., and Sverbilov, V., Study on dynamics of air pressure reducing valve with focus on the noise attenuation problem, Proc. 8th FPNI Ph.D Symposium on Fluid Power (FPNI 2014), June 11–13, 2014, Proc. ASME, Lappeenranta: Lappeenranta Univ. Technol., 2014, no. 108837.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.A. Bolotov, V.A. Pechenin, N.V. Ruzanov, I.A. Grachev, I.V. Shcherbakov, N.D. Pronichev, 2017, published in STIN, 2017, No. 3, pp. 22–28.
About this article
Cite this article
Bolotov, M.A., Pechenin, V.A., Ruzanov, N.V. et al. Coupling of components at plane–cylinder surfaces. Russ. Engin. Res. 37, 733–738 (2017). https://doi.org/10.3103/S1068798X17080081
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X17080081