Abstract
A mathematical model is proposed for geometric measurements of cylindrical spur gears using triaxial coordinate-measurement machines. The measurement errors associated with the proposed model are compared with those of the standard method.
Similar content being viewed by others
References
Ped’, S.E., Masterenko, D.A., Panfilov, P.V., et al., Development of a model series of hardware-software complexes for automated measurements of the parameters of gear-cutting tools, Meas. Tech., 2014, vol. 56, no. 12, pp. 1370–1376.
Surkov, I.V. and Myagkova, M.V., Coordinate measures of linear-angular parameters of gears, Metalloobrabotka, 2007, no. 6, pp. 2–6.
Guenther, A., Evaluation of run-out deviation at bevel gears based on pitch measurements, CIRP Ann., 2006, vol. 55, no. 1, pp. 539–542.
Rogers, D.F. and Adams, J.A., Mathematical Elements for Computer Graphics, New York: McGraw-Hill, 1989.
GOST (State Standards) 16530-83: Gears. General Terms, Definitions, and Symbols, Moscow: Izd. Standartov, 1983.
Goch, G., Gear metrology, CIRP Ann., 2003, vol. 52, no. 2, pp. 659–695.
Powell, M.J.D., A fast algorithm for nonlinearly constrained optimization calculations, Num. Anal., 1978, vol. 630, pp. 144–157.
Trapet, E. and Waldele, F., The Virtual CMM Concept, Singapore: World Sci., 1996, pp. 238–247.
Sammartini, M.P. and De Chaffre, L., Development and validation of a new reference cylindrical gear for pitch measurement, Precis. Eng., 2000, vol. 24, no. 4, pp. 302–309.
Pechenin, V.A., Bolotov, M.A., and Ryzhkov, A.V., Estimation model of the accuracy of coordinate measurements in contact mode, Mater. mezhd. nauchnoprakt. konf. “Virtual’noe modelirovanie, prototipirovanie i promyshlennyi dizain” (Proc. Int. Sci.-Pract. Conf. “Virtual Simulation, Prototyping, and Industrial Design”), Tambov, 2015, pp. 217–222.
Alkseev, V.I., Aviatsionnye zubchatye peredachi i reduktory: spravochnik (Aviation Gears and Gearboxes: Handbook), Moscow: Mashinostroenie, 1981.
Demin, F.I., Pronichev, N.D., and Shitarev, I.L., Tekhnologiya izgotovleniya osnovnykh detalei gazoturbinnykh dvigatelei: uchebnoe posobie (The Production Technology of General Parts of Gas Turbine Engines: Manual), Moscow: Mashinostroenie, 2002.
GOST (State Standards) 13755–81: Basic Requirements for Interchangeabilily. Gearings Cylindric Evolvent. Basic Rack, Moscow: Izd. Standartov, 1983.
GOST (State Standards) 1643–81: Cylindrical Gears Pairs. Accuracy, Moscow: Izd. Standartov, 1981.
OST (State Standards) 1.41671–77: Cylindrical Gear Wheels for Aircraft Industry. Accuracy, Moscow: Izd. Standartov, 1977.
GOST (State Standards) 6636–69: Normal Linear Dimensions, Moscow: Izd. Standartov, 1969.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.A. Pechenin, M.A. Bolotov, N.V. Ruzanov, 2016, published in STIN, 2016, No. 4, pp. 17–22.
About this article
Cite this article
Pechenin, V.A., Bolotov, M.A. & Ruzanov, N.V. Coordinate measurements of cylindrical-gear precision. Russ. Engin. Res. 36, 861–866 (2016). https://doi.org/10.3103/S1068798X16100142
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16100142