Abstract
The stress state of wear-resistant coatings is investigated. It is determined by the total stress and depends on the coating composition and the basic tool material. It will also depend on the structure of multilayer coatings. The influence of the stress state on the tool’s wear rate is demonstrated.
Similar content being viewed by others
References
Tabakov, V.P., Formirovanie iznosostoikikh ionnoplazmennykh pokrytii rezhushchego instrumenta (Formation of Wear-Resistant Ion-Plasma Coatings on Cutting Tools), Moscow: Mashinostroenie, 2008.
Tabakov, V.P. and Ermolaev, A.A., Multilayer coatings of a tool for continuous cutting, Stanki Instrum., 2005, no. 7, pp. 21–25.
Tabakov, V.P., Shirmanov, N.A., and Smirnov, M.Yu., Increase of the face mills efficiency by improvement of the wear resistance of coatings structure, Stanki Instrum., 2002, no. 2, pp. 6–10.
Tabakov, V.P., The influence of machining condition forming multilayer coatings for cutting tools, Key Eng. Mater., 2012, vol. 496, pp. 80–85.
Tabakov, V.P. and Vereschaka, A.S., Development of technological means for formation of multilayer composite coatings, providing increased wear resistance of carbide tools, for different machining condition, Key Eng. Mater., 2014, vol. 581, pp. 55–61.
Tabakov, V.P., Crack resistance of tool coatings in continuous cutting, Russ. Eng. Res., 2012, vol. 32, no. 5, pp. 464–468.
Tabakov, V.P., Chikhranov, A.V., and Tulisov, A.N., Evaluation of stability of cracks of three-element coatings based on nitrides, Uprochn. Tekhnol. Pokryt., 2009, no. 3, pp. 11–17.
Tabakov, V.P. and Chikhranov, A.V., Iznosostoikie pokrytiya rezhushchego instrumenta, rabotayushchego v usloviyakh nepreryvnogo rezaniya (Wear-Resistant Coatings of Cutting Tolls Operated in Continuous Cutting), Ulyanovsk: Ul’yanovsk, Gos. Tekh. Univ., 2007.
Tabakov, V.P. and Chikhranov, A.V., Determination of the mechanical characteristics of the wear-resistant ion-plasma coatings of titanium nitride, Izv. Samar. Nauch. Tsentra, Ross. Akad. Nauk, 2010, vol. 12, no. 4, pp. 292–297.
Tabakov, V.P., Smirnov, M.Yu., Tulisov, A.N., and Chikhranov, A.V., Calculating the Crack Resistance of Wear-Resistant Coatings Based on Modified Titanium Nitride, Uprochn. Tekhnol. Pokryt., 2010, no. 3, pp. 43–48.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.P. Tabakov, A.V. Chikhranov, 2016, published in Vestnik Mashinostroeniya, 2016, No. 3, pp. 49–54.
About this article
Cite this article
Tabakov, V.P., Chikhranov, A.V. Stress state of wear-resistant tool coatings. Russ. Engin. Res. 36, 454–460 (2016). https://doi.org/10.3103/S1068798X16060198
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16060198