Abstract
Dimensionless invariants for assessing the stress–strain state in specific stamping operations are analyzed. Their influence on the stability of plastic deformation is discussed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Sosenushkin, E.N., Development of plastic-deformation systems, Vestn. MGTU Stankin, 2010, no. 1, pp. 30–38.
Bil’chuk, M.V. and Sosenushkin, E.N., Predicting the formation of surface defects in forging flanges during hot bulk stamping, Vestn. MGTU Stankin, 2012, no. 4(23), pp. 44–48.
Sosenushkin, E.N., Khromenkov, A.V., and Melnik, Yu.A., Mathematical model of adhesive wear of three-dimensional dies, J. Frict. Wear, 2014, vol. 35, no. 6, pp. 525–530.
Kremnov, L.S., Onegina, A.K., and Vinogradova, L.A., Special features of transformations, structure and properties of molybdenum high-speed steels, Metal. Sci. Heat. Treat., 2009, vol. 51, no. 11/12, pp. 579–584.
Adaskin, A.M., Use of the effect of stress relaxation for changing the shape of articles from nonplastic steels and alloys, Metal. Sci. Heat. Treat., 2012, vol. 54, no. 1/2, pp. 47–51.
Grigor’ev, S.N., Fedorov, S.V., and Pavlov, M.D., Complex surface modification of carbide tool by Nb plus Hf plus Ti alloying followed by hardfacing (Ti plus Al)N, J. Frict. Wear, 2013, vol. 34, no. 1, pp. 14–18.
Artes, A.E., Volodin, A.M., Sosenushkin, E.N., Tret’yukhin, V.V., et al., Innovative stamping technology for hollow pump arms in oil boreholes, Vestn. MGTU Stankin, 2011, no. 2, pp. 18–21.
Artes, A.E., Sosenushkin, E.N., Tret’yukhin, V.V., et al., Resourceand energy-saving manufacturing technologies based on pressure treatment, Russ. Eng. Res., 2013, vol. 33, no. 8, pp. 460–462.
Ponomarev, A.S., Sosenushkin, E.N., and Klimov, V.N., Effect of process features of pressure treatment on the microstructure and quality of parts of pipeline fittings from high-strength cast-iron, Metal. Sci. Heat. Treat., 2012, vol. 54, no. 1/2, pp. 22–27.
Ponomarev, A.S., Sosenushkin, E.N., and Artes, A.E., Reduction of VCh-40 cast-iron pipe blanks, Vestn. MGTU Stankin, 2011, no. 4(16), pp. 43–45.
Sosenushkin, E.N., Puzyr’, R.G., and Yanovskaya, E.A., Establishing the stress field in radial–rotary shaping of a cylindrical blank without taking account of the tool’s rounding radii, Vestn. MGTU Stankin, 2013, no. 4(27), pp. 42–47.
Sosenushkin, E.N., Artes, A.E., Yanovskaya, E.A., and Khachatryan, D.V., Pipe blanks: Technological aspects of expansion and reduction, Vestn. MGTU Stankin, 2010, no. 4(12), pp. 36–41.
Nepershin, R.I., Pressing a rigid-plastic strip through a curvilinear matrix channel, Mechan. Solids, 2008, vol. 43, no. 2, pp. 300–313.
Sosenushkin, E.N., Ovechkin, L.M., and Sosenushkin, A.E., Improving intense plastic deformation, Vestn. MGTU Stankin, 2012, vol. 1, no. 1, pp. 21–29.
Malinin, N.N., Prikladnaya teoriya plastichnosti i polzuchesti (Applied Theory of Plasticity and Creep), Moscow: Mashinostroenie, 1968.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © E.N. Sosenushkin, E.A. Yanovskaya, A.E. Sosenushkin, V.V. Emel’yanov, 2015, published in Vestnik Mashinostroeniya, 2015, No. 9, pp. 29–33.
About this article
Cite this article
Sosenushkin, E.N., Yanovskaya, E.A., Sosenushkin, A.E. et al. Mechanics of nonmonotonic plastic deformation. Russ. Engin. Res. 35, 902–906 (2015). https://doi.org/10.3103/S1068798X15120199
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15120199