Abstract
On the basis of similarity theory and dimensional analysis, a method is proposed for analysis of the cutting of new structural materials. The new method requires fewer tests and provides more reliable information regarding the cutting parameters.
Similar content being viewed by others
References
Krylov, E.G., Mnogolezviinye rezhushchie instrumenty (Multicutter Tools), Saarbrucken, Germany: Lambert Academic Publishing, 2014.
Guzeev, V.I., Batuev, V.A., and Surkov, I.V., Rezhim rezaniya dlya tokarnykh i sverlil’no-frezerno-rastochnykh stankov s chislovym upravleniem (Cutting Conditions for Numerically Controlled Lathes and Drilling–Milling–Reaming Machines), Moscow: Mashinostroenie, 2007.
Krylov, E.G. and Belova, A.V., Predicting the limiting state of multicutter hard-alloy tools, Russ. Eng. Res., 2014, vol. 34, no. 6, pp. 381–385.
Krylov, E.G. and Serdobintsev, Yu.P., Cutting-tool selection in automated production, Avtomat. Sovrem. Tekhnol., 2014, no. 10, pp. 3–6.
Krylov, E.G., Serdobintsev, Yu.P., and Kozlovtseva, N.V., Automated tool-monitoring in cutting hard-tomachine materials, Mekhatron., Avtomat., Upravl., 2013, no. 10, pp. 47–51.
Parton, V.Z. and Morozov, E.M., Mekhanika uprugoplasticheskogo razrusheniya (Mechanics of Elastoplastic Failure), Moscow: Nauka, 1985.
Balykov, A.V., Serdobintsev, Yu.P., and Listunov, L.S., Adaptive control of the diamond drilling of nonmetals, Steklo Keram., 2007, no. 3, pp. 28–30.
Bridgman, P., Dimensional Analysis, New Haven, Conn.: Yale University Press, 1931.
Bobrov, V.F., Osnovy teorii rezaniya metallov (Fundamentals of Metal-Cutting Theory), Moscow: Mashinostroenie, 1975.
Landau, L.D. and Lifshitz, E.M., Course of Theoretical Physics, Vol. 7, Theory of Elasticity, New York, Pergamon, 1970.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.P. Serdobintsev, E.G. Krylov, A.M. Makarov, V.G. Barabanov, N.V. Kozlovtseva, 2015, published in STIN, 2015, No. 5, pp. 24–28.
About this article
Cite this article
Serdobintsev, Y.P., Krylov, E.G., Makarov, A.M. et al. More efficient analysis of the machining of new structural materials. Russ. Engin. Res. 35, 864–867 (2015). https://doi.org/10.3103/S1068798X15110167
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15110167