Abstract
The kinematic and stress state associated with the insertion of a punch in a half-space is considered.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Sokolovskii, V.V., Teoriya plastichnosti (Theory of Plasticity), Moscow: Vysshaya Shkola, 1969.
Kuznetsov, D.P., Lyasnikov, A.V., and Kudryavtsev, V.A., Tekhnologiya formoobrazovaniya kholodnym vydavlivaniem polostei detalei press-form i shtampov (Shaping the Cavities of Mold and Die Components by Cold Extrusion), Moscow: Mashinostroenie, 1973.
Smirnov-Alyaev, G.A., Soprotivlenie materialov plasticheskomu deformirovaniyu (Resistance to Plastic Deformation), Leningrad: Mashinostroenie, 1978.
Tomlenov, A.D., Teoriya plasticheskogo deformirovaniya metallov (Theory of the Plastic Deformation of Metals), Moscow: Metallurgiya, 1972.
Vorontsov, A.L., Theoretical aspects of technological mechanics. 8. Plane plasticity-theory problem. Part 1, Russ. Eng. Res., 2014, vol. 34, no. 3.
Kachanov, L.M., Osnovy teorii plastichnosti (Fundamentals of Plasticity Theory), Moscow: Nauka, 1969.
Stepanskii, L.G. Raschety protsessov obrabotki metallov davleniem (Calculations of the Pressure Treatment of Metals), Moscow: Mashinostroenie, 1979.
Vorontsov, A.L., Tekhnologicheskie zadachi teorii plastichnosti (Technological Problems of Plasticity Theory), Moscow: Mashinostroenie, 2006, vol. 1.
Gun, G.Ya., Teoreticheskie osnovy obrabotki metallov davleniem (Theoretical Principles of the Pressure Treatment of Metals), Moscow: Metallurgiya, 1980.
Kamke, E., Differentialgleichungen: Losungsmethoden und Losungen, vol. 1, Gewohnliche Differentialgleichungen, Leipzig: Teubner, 1942.
Tarnovskii, I.Ya., Pozdeev, A.A., Ganago, O.A., et al., Teoriya obrabotka metallov davleniem (Theory of the Pressure Treatment of Metals), Moscow: Metallurgizdat, 1963.
Krokha, V.A., Uprochnenie metallov pri kholodnoi plasticheskoi deformatsii. Spravochnik (Strengthening of Metals in Cold Plastic Deformation), Moscow: Mashinostroenie, 1980.
Vorontsov, A.L., Teoriya shtampovki vydavlivaniem (Theory of Extrusive Stamping), Moscow: Mashinostroenie, 2004.
Prager, W. and Hodge, F.G., Theory of Perfectly Plastic Bodies, New York: Wiley, 1951.
Hill, R., Mathematical Theory of Plasticity, Oxford: Clarendon Press, 1950.
Johnson, W. and Mellor, P.B., Engineering Plasticity, London: Van Nostrand, 1973.
Kholodnaya ob’emnaya shtampovka: Spravochnik (Cold Bulk Stamping: A Handbook), Navrotskii, G.A., Ed., Moscow: Mashinostroenie, 1973.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.L. Vorontsov, 2014, published in Vestnik Mashinostroeniya, 2014, No. 2, pp. 73–80.
Earlier articles in this series appeared in Russian Engineering Research, 2013, nos. 4–12; and 2014, nos. 1–4. The next will be published in Russian Engineering Research, 2014, no. 6.
About this article
Cite this article
Vorontsov, A.L. Theoretical aspects of technological mechanics. 8. Plane problems in plasticity theory. Part 3. Russ. Engin. Res. 34, 303–310 (2014). https://doi.org/10.3103/S1068798X14050177
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14050177