Abstract
Reliable determination of the strength of materials on the basis of hardness measurements is shown to be impossible. The stress, kinematic, and strain states of a half-space during the insertion of an axisymmetric body are determined.
Similar content being viewed by others
References
Krokha, V.A., Krivye uprochneniya metallov pri kholodnoi deformatsii (Strengthening Curves of Metals in Cold Deformation), Moscow: Mashinostroenie, 1968.
Krokha, V.A., Uprochnenie metallov pri kholodnoi plasticheskoi deformatsii. Spravochnik (Strengthening of Metals in Cold Plastic Deformation: A Handbook), Moscow: Mashinostroenie, 1980.
Vorontsov, A.L., Tekhnologicheskie zadachi teorii plastichnosti (Technological Problems of Plasticity Theory), Moscow: Mashinostroenie, 2006, vol. 1.
Kholodnaya ob’emnaya shtampovka: Spravochnik (Cold Bulk Stamping: A Handbook), Navrotskii, G.A., Ed., Moscow: Mashinostroenie, 1973.
Del’, G.D., Tekhnologicheskaya mekhanika (Technological Mechanics), Moscow: Mashinostroenie, 1978.
Belousov, A.I., Bobrik, P.I., Rakhman-Zade, A.Z., et al., Teplovye yavleniya i obrabatyvaemost’ rezaniem aviatsionnykh materialov. Tr. MATI (Thermal Phenomena and Ease of Cutting of Aviation Materials: Proceedings of Moscow Aviation-Technology Institute), Moscow: Mashinostroenie, 1966, no. 64.
Storozhev, M.V. and Popov, E.A., Teoriya obrabotka metallov davleniem (Theory of the Pressure Treatment of Metals), Moscow: Mashinostroenie, 1977.
Sokolovskii, V.V., Teoriya plastichnosti (Theory of Plasticity), Moscow: Vysshaya Shkola, 1969.
Stepanskii, L.G., Raschety protsessov obrabotki metallov davleniem (Calculations of the Pressure Treatment of Metals), Moscow: Mashinostroenie, 1979.
Kuznetsov, D.P., Lyasnikov, A.V., and Kudryavtsev, V.A., Tekhnologiya formoobrazovaniya kholodnym vydavlivaniem polostei detalei press-form i shtampov (Shaping of Mold and Die Cavities by Cold Extrusion), Moscow: Mashinostroenie, 1973.
Smirnov-Alyaev, G.A., Soprotivlenie materialov plasticheskomu deformirovaniyu (Resistance to Plastic Deformation), Leningrad: Mashinostroenie, 1978.
Tomlenov, A.D., Teoriya plastichnogo deformirovaniya metallov (Theory of the Plastic Deformation of Metals), Moscow: Metallurgiya, 1972.
Piskunov, N.S., Differential’noe i integral’noe ischisleniya (Differential and Integral Calculus), Moscow: Nauka, 1972.
Kachanov, L.M., Osnovy teorii plastichnosti (Fundamentals of Plasticity Theory), Moscow: Nauka, 1969.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.L. Vorontsov, 2014, published in Vestnik Mashinostroeniya, 2014, No. 5, pp. 74–78.
Earlier articles in this series appeared in Russian Engineering Research, 2013, nos. 4–12; and 2014, nos. 1–7. The next will be published in Russian Engineering Research, 2014, no. 9.
About this article
Cite this article
Vorontsov, A.L. Theoretical aspects of technological mechanics. 10. Hardness and axisymmetric indentation of a half-space. Part 1. Russ. Engin. Res. 34, 504–508 (2014). https://doi.org/10.3103/S1068798X14080164
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14080164