Abstract
The stress and strain, strain rate and loading rate, internal-friction coefficients (viscosity), and deformation time of the cut layer are predicted for structural carbon steels and alloy steels characterized by self-organization of the viscoplastic flow on turning. Physical models of the metal’s viscoplastic-flow parameters in the chip-formation zone are employed.
Similar content being viewed by others
References
Ziegler, G., Extremal Principles of the Thermodynamics of Irreversible Processes and Continuum Mechanics (Russian translation), Moscow: Mir, 1966.
Nodel’man, M.O. and Sukhovilov, B.M., Self-Regulation of the Cutting of Plastic Metals, Vestn. Mashinostr., 1997, no. 10, pp. 39–42.
Nodel’man, M.O. and Sukhovilov, B.M., Trends in Cutting, Mashinostroitel, 1996, no. 4, pp. 8, 9.
Razvitie nauki o rezanii metallov (Development of the Science of Metal Cutting), Bobrov, V.F., et al., Moscow: Mashinostroenie, 1967.
Nodel’man, M.O. and Sukhovilov, B.M., Specification of Cutting Conditions, Nauka-Proizvodstvu, 1998, no. 1(3), pp. 7–15.
Nodel’man, M.O., Mekhanoobrabotka rezaniem. Osnovy teorii i praktika (Cutting: Theoretical and Practical Processes), Chelyabinsk: Izd. REKPOL, 2005.
Nodel’man, V.O., Determining the Parameters of the Cutting Scheme with Parallel Boundaries of the Chip-Formation Zone, Vestn. Mashinostr., 2000, no. 1, pp. 34–38.
Govorukhin, V.A., Stress-Strain State in High-Speed Cutting of Plastic Metals, Cand. Sci. Dissertation, Tomsk, 1968.
Nodel’man, V.O., Structure of the Mean Frictional Coefficient in Cutting Plastic Metals, Vestn. Mashinostr., 1996, no. 1, pp. 27–32.
Klushin, M.I., Rezanie metallov (Metal Cutting), Moscow: Mashgiz, 1958.
Rheology: Theory and Applications, Eirich, F.R., Ed., New York: Academic, 1956.
Reiner, M., Deformation, Strain, and Flow: An Elementary Introduction to Rheology, New York: Interscience, 1960.
Author information
Authors and Affiliations
Additional information
Original Russian Text © M.O. Nodel’man, 2009, published in Vestnik Mashinostroeniya, 2009, No. 8, pp. 43–52.
About this article
Cite this article
Nodel’man, M.O. Predicting the rheological parameters of plastic metals with self-organization of the viscoplastic flow in the cut layer. Russ. Engin. Res. 29, 782–793 (2009). https://doi.org/10.3103/S1068798X09080085
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X09080085