Abstract—
Pyrolytic chromium carbide coatings (PCCs) deposited on stainless steel from the vapor phase using metalorganic chromium-containing liquid Barkhos and then annealed at 700−1000°C are investigated using X-ray diffraction and metallographic analysis; the elemental composition is also established. The annealing of PCC samples is carried out in air and in vacuum at different temperatures: 700, 800, 900, and 1000°C. The possibility of using this PCC as a means for surface modification of steel products designed for use at temperatures up to 1000°C is demonstrated.
Similar content being viewed by others
REFERENCES
Kravchenko, I.N., Kolomeichenko, A.V., Sharifullin, S.N., Kuznetsov, Yu.A., et al., J. Phys.: Conf. Ser., 2018, vol. 1058, art. ID 012046. https://doi.org/10.1088/1742-6596/1058/1/012046
Fan, X., Darut, G., Planche, M.-P., Feng, X., et al., J. Therm. Spray Technol., 2019, vol. 28, nos. 1–2, pp. 265–272. https://doi.org/10.1007/s11666-018-0777-0
Shaginyan, L.R., Britun, V.F., Krapivka, N.A., Firstov, S.A., et al., Powder Metall. Met. Ceram., 2018, vol. 57, nos. 5–6, pp. 293–300. https://doi.org/10.1007/s11106-018-9982-0
Yang, Q., Bielawski, M., and McKellar, R.C., Metallogr., Microstruct.Anal., 2012, vol. 1, nos. 3–4, pp. 150–157. https://doi.org/10.1007/s13632-012-0025-9
Bakaeva, R.D., Baldaev, L.Kh., Ishmukhametov, D.Z., and Rashkovskii, A.Yu., Metallurgist, 2018, vol. 62, nos. 7–8, pp. 707–713. https://doi.org/10.1007/s11015-018-0712-0
Stolin, A.M., Bazhin, P.M., Mikheyev, M.V., Averichev, O.A., et al., Weld. Int., 2015, vol. 29, no. 8, pp. 657–660. https://doi.org/10.1080/09507116.2014.960703
Lyalyakin, V.P., Murzaev, V.P., Solovev, R.Yu., and Slinko, D.B., Weld. Int., 2017, vol. 31, no. 9, pp. 729–732. https://doi.org/10.1080/09507116.2017.1315078
Ding, R., Li, X., Wang, J., Li, W., et al., J. Mater. Eng. Perform., 2018, vol. 27, no. 11, pp. 5947–5963. https://doi.org/10.1007/s11665-018-3580-7
Tang, J., Saha, G.C., Richter, P., Kondas, J., et al., J. Therm. Spray Technol., 2018, vol. 27, no. 11, pp. 1153–1164. https://doi.org/10.1007/s11666-018-0762-7
Bu, A., Ji, G., Liu, Q., and Shi, Z., J. Mater. Eng. Perform., 2018, vol. 27, no. 10, pp. 5321–5328. https://doi.org/10.1007/s11665-018-3639-5
Kuznetsov, V.V., Filatova, E.A., Telezhkina, A.V., and Kruglikov, S.S., J. Solid State Electrochem., 2018, vol. 22, no. 7, pp. 2267–2276. https://doi.org/10.1007/s10008-018-3929-8
Drugov, P.N., Yakovlev, S.I., and Kravetskii, G.A., Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr., 1992, no. 2, pp. 25–34.
Markov, M.A., Previslov, S.N., Krasikov, A.V., Gerashchenkov, D.A., et al., Russ. J. Appl. Chem., 2018, vol. 91, no. 4, pp. 543–549. https://doi.org/10.1134/S107042721804002X
Savushkina, S.V., Ashmarin, A.A., Apelfeld, A.V., Borisov, A.M., et al., J. Phys.: Conf. Ser., 2017, vol. 857, art. ID 012037. https://doi.org/10.1088/1742-6596/857/1/012037
Agureev, L., Savushkina, S., Ashmarin, A., and Borisov, A., Metals, 2018, vol. 8, pp. 459–461. https://doi.org/10.3390/met8060459
Ji, R., Liu, Y., Xu, C., Li, X., et al., Int. J. Adv. Manuf. Technol., 2017, vol. 89, nos. 5–8, pp. 1875–1886. https://doi.org/10.1007/s00170-016-9244-6
Sergevnin, V.S., Blinkov, I.V., Belov, D.S., Smirnov, N.I., et al., Int. J. Adv. Manuf. Technol., 2018, vol. 98, nos. 1–4, pp. 593–601. https://doi.org/10.1007/s00170-018-2235-z
Guha, S., Das, S., Bandyopadhyay, A., et al., Appl. Phys. A, 2018, vol. 124, p. 35. https://doi.org/10.1007/s00339-017-1455-7
Olofinjana, B., Mbamara, U.S., Ajayi, O., Lorenzo-Martin, C., et al., Friction, 2017, vol. 5, no. 4, pp. 402–413. https://doi.org/10.1007/s40544-017-0154-x
Vasin, V.A., Krit, B.L., Nevrovskii, V.A., Somov, O.V., et al., Surf. Eng. Appl. Electrochem., 2016, vol. 52, no. 5, pp. 475–479. https://doi.org/10.3103/S1068375516050136
ACKNOWLEDGMENTS
We are grateful to Dr. Sci. (Tech.) S. A. Oglezneva, the head of the Center of Collective Use “Powder Materials and Nanomaterials,” Perm National Research Polytechnic University (Perm, Russia), for technical assistance and access to equipment (a VTP-0.6 furnace and a SENVE-5.5/15-I1 vacuum oven).
Funding
The work was supported by the Ministry of Education and Science, Russian Federation (agreement ID RFMEFI57718X0288).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by A. Kukharuk
About this article
Cite this article
Somov, O.V., Pashkin, V.A., Savushkina, S.V. et al. Pyrolytic Chromium Carbide Coatings on Steel: Effect of Annealing on Morphology and Elemental Composition. Surf. Engin. Appl.Electrochem. 56, 140–146 (2020). https://doi.org/10.3103/S1068375520020179
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068375520020179