Abstract
To determine the (current-voltage) characteristics for the fabricated Disks of varistors, we need to design a circuit, which can generate voltages with different Amplitudes and frequencies. This device can change the voltage and frequency automatically and linearly. We can use this device to study characteristics of the fabricated components or in QC procedures. Device gets the frequency of output voltage from 46 quantized values between 0.001 HZ to 100 HZ in the computer software. The peak to peak Amplitude of symmetric triangular voltage can change from 0 V to 600 V.
Similar content being viewed by others
References
Matsuoka, M., Nonohmic Propierties of Zinc Oxide, Jpn. J. Appl. Phys., 1971, no. 10, pp. 736–741.
Lou, L.F., Current-Voltage Characteristics of ZNOBi2O3 Heterojunction, Journal of Applied Physics, 1979, vol. 50, p. 555.
Hasanli, Sh.M. and Harirchi, F., Influence of Impurities on Electrophysical Characteristics of the ZnO-base Varistors, POWER ENGINEERING PROBLEMS, 2008, p. 92–95.
Milman, J. and Halkias, C.C., Integrated Electronics: Analog and Digital Circuits and Systems, McGraw-Hill, 1972.
Sedra, A.S. and Smith, K.C., Microelectronic Circuits, Oxford Universitypress, 1998.
Mazidi, M.A., Mazidi, J., and Mckinlay, R., The 8051 Microcontroller and Embedded Systems Using Assembly and C. 2nd Edition, Prentice Hall.
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
About this article
Cite this article
Harirchi, F., Hasanli, S.M. Design and make a triangular wave oscillator with application to extract the V-I characteristics of ZnO varistors. Surf. Engin. Appl.Electrochem. 47, 84–88 (2011). https://doi.org/10.3103/S1068375511010091
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068375511010091