Abstract
The basic parameters of comparative tests of UO2 fuel pellets produced by the technology of powder metallurgy for aftersinterability using their repeated thermal treatment (aftersintering) in different gas media, namely, with and without humidification, are presented. The results of an evaluation of the level of aftersinterability of these pellets by different procedures is presented, they are analyzed, and a substantiation of the expediency of using this operation manual for evaluating afersintering without the humidification of the gas medium developed at the OAO Machine Building Works (MSZ), Elektrostal’, Moscow oblast, is presented.
Similar content being viewed by others
References
An Acceptable Model and Related Statistical Methods for the Analysis of Fuel Densification, US Nuclear Regulatory Commission, Regulatory Guide 1.126.1978.
Freshley, M.D., Brite, D.M., Daniel, I.L., and Hart, P.E., J. Nucl. Mater, 1976, vol. 62, pp. 138–166.
Radford, K. and Pope, I., J. Nucl. Mater, 1977, vol. 64, pp. 289–299.
Radford, K., et al., US Patent 4430276, 1984.
Basov, V.V., Metodika provedeniya ispytanii tabletok is dioksida urana na “dospekaemost’“ (Procedure for Performance of the Tests of the Pellets made of Uranium Dioxide for Aftersinterability), Electrostal’: PO MSZ, 1994.
Bakhteev, A.N., Opredelenie termicheskoi stabil’nosti geometricheskikh razmerov toplivnykh tabletok tipa “V” i “R”: Metodika vypolneniya izmerenii (Determination of Thermal Stability of Geometric Sizes for Fuel Pellets of Types “V” and “R”: Procedure of Carrying out the Measurements), Moscow: VNIINM, 1992.
Basov, V.V., Opredelenie kharacteristik termicheskoi stabil’nosti toplivnykh tabletok tipov “R”, “R-E”, “V”: Metodika (tekhnologicheskaya instruktsiya) (Determination of Characteristics of Thermal Stability of Fuel Pellets of Types “R”, “R-E”, and “V”: Procedure (Technological Instruction), Electrostal’: OAO MSZ, 1999.
Kotel’nikov, R.B., Bashlykov, S.N., Kashtanov, A.I., et al., Vysokotemperaturnoe yadernoe toplivo (HighTemperature Nuclear Fuel), Moscow: Metallurgiya, 1978.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.V. Basov, 2009, published in Izvestiya VUZ. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya, 2009, No. 3, pp. 27–30.
About this article
Cite this article
Basov, V.V. Comparative investigations of aftersintering of UO2 fuel pellets. Russ. J. Non-ferrous Metals 51, 173–176 (2010). https://doi.org/10.3103/S1067821210020185
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821210020185