Abstract
The influence that a Zr additive (0.3–0.6 wt %) and annealing modes have on the electrical resistance and mechanical properties of cold-rolled sheets obtained from cast ingots on the basis of technical grade A7E aluminum is investigated. It is shown that all zirconium-doped alloys retain deformation strengthening after 1-h annealing at 300°C, in contrast to undoped aluminum. In this case, as the Zr concentration increases, the strength properties improve, which may be associated with the summation of two effects: deformation and dispersion. It is established that, as the Zr content increases, the resistance of cold-rolled sheets substantially increases; however, after annealing, this characteristic is first of all determined by the zirconium concentration in the aluminum-based solid solution and depends on the parameters of heat treatment.
Similar content being viewed by others
References
Promyshlennye alyuminievye splavy: Spravochnik (Industrial Aluminum Alloys: Handbook), Kvasov, F.I. and Fridlyander, I.N., Eds., Moscow, Metallurgiya, 1984.
Aluminum. Properties and Physical Metallurgy Hatch, J.E., Ed., Metals Park, OH, ASM, 1984; Moscow: Metallurgiya, 1989.
Uliasz, P., Knych, T., Mamala, A., and Smyrak, B., Aluminum Alloys: Their Physical and Mechanical Properties, in Proc. ICAA11, Hirsch, J., Scrotzki, B., and Gottstein, G., Eds., Aahen, DCM, 2008, p. 248.
Belov, N.A. Istomin-Kastrovskii, V.V., and Alabin, A.N., Izv. Vyssh. Uchebn. Zaved., Tsvetn. Metal., 2003, no. 4, p. 54.
Belov, N.A., Alabin, A.N., Eskin, D.G., and Istomin-Kastrovskiy, V.V., J. Mater. Sci., 2006, vol. 41, p. 5890.
Belov, N.A., Alabin, A.N., Istomin-Kastrovskii, V.V., and Stepanova, E.G., Izv. Vyssh. Uchebn. Zaved., Tsvetn. Metal., 2006, no. 2, p. 60.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.A. Belov, A.N. Alabin, A.Yu. Prokhorov, 2009, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2009, No. 4, pp. 42–47.
About this article
Cite this article
Belov, N.A., Alabin, A.N. & Prokhorov, A.Y. The influence that a zirconium additive has on the strength and electrical resistance of cold-rolled aluminum sheets. Russ. J. Non-ferrous Metals 50, 357–362 (2009). https://doi.org/10.3103/S1067821209040099
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821209040099