Abstract
Introduction of hydrogen technology provided hot-rolling fabrication of thin strips from chips of VT1-0 titanium alloy without chip remelting. It is established that the plasticity of strips made from this alloy largely depends on the presence of excess dispersed particles in the structure. It is assumed that they are the sparingly soluble oxides formed during the destruction in the course of pressure treatment of the oxide film retained on the chip surface. After homogenization, which can be combined with vacuum annealing for hydrogen removal, the structure and mechanical properties of the strips obtained by hydrogen technology correspond to the characteristics of semifinished products fabricated by ingot technology.
Similar content being viewed by others
References
Il’in, A.A., Kolachev, B.A., Nosov, V.K., and Mamonov, A.M., Vodorodnaya tekhnologiya titanovykh splavov (Hydrogen Technology of Titanium Alloys), Moscow: MISIS, 2002.
Shevshenko, V.V., Kolachev, B.A., Mal’kov, A.V., et al., Patent RF 4 931 636/02, 1991.
Shevshenko, V.V., Kolachev, B.A., Talalaev, V.D., et al., Tekhnol. Legkikh Splavov, 1998, no. 4, p. 38.
Kolachev, B.A., Shevchenko, V.V., Nizkin, I.D., et al., Izv. Vyssh. Uchebn. Zaved., Tsvetn. Metall., 1995, no. 1, p. 59.
Kolachev, B.A. and Mal’kov, A.V., Fizicheskie osnovy razrusheniya titana (Physical Foundations of Destruction of Titanium), Moscow: Metallurgiya, 1983.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Mal’kov, V.V. Shevchenko, I.D. Nizkin, E.V. Luk’yanova, 2008, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2008, No. 4, pp. 44–47.
About this article
Cite this article
Mal’kov, A.V., Shevchenko, V.V., Nizkin, I.D. et al. Structure and properties of hot-rolled strips obtained from titanium chips without chip remelting. Russ. J. Non-ferrous Metals 49, 258–260 (2008). https://doi.org/10.3103/S1067821208040081
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821208040081